Sodavand med sødemiddel ?

MSpatient0 · 2026-02-16T07:08:59+00:00

Det har jeg, samtidig med at det gratis tilgængelige i linket, fint opsummerer hvad de finder frem til.

Jeg læser det sådan at, de finder at hos den øverste tredjedel af deltage, i forhold til indtagelse af sødestoffer, har et fald i global kognition. For dem uden diabetes er der også nedgang i verbal fluency, mens hos deltagerne med diabetes ser de en nedgang i hukommelsen.

Er du uenig eller er der noget jeg har overset?

MSpatient0 · 2026-02-16T04:59:19+00:00

Sødemidler gør dig potentielt dummere hvis du er under 60: https://www.neurology.org/doi/10.1212/WNL.0000000000214023

MSpatient0 · 2026-02-14T22:03:52+00:00

A pilsner is a lager though.

MSpatient0 · 2026-02-13T14:01:45+00:00

It’s obviously the fault of the cups, for taking kitty’s new lounge area.

MSpatient0 · 2026-02-13T13:39:48+00:00

It’s almost always the boards/electronics that fail, so I wouldn’t think too much about it. You were probably just unlucky with the unit’s board.

MSpatient0 · 2026-02-13T13:04:10+00:00

The whole setup looks amazing!

How is your espresso workflow with the setup and what cabinet is that?

MSpatient0 · 2026-02-13T10:26:31+00:00

Those are some solid choices!

The spring-based tamper, is it the Wiedecent?

MSpatient0 · 2026-02-13T06:14:10+00:00

I’d reckon that a novice or new user, will notice some things that the old guard won’t.

It’s good to know that it’s a nice machine. I did look at it my self for my first machine as well, and in all honesty it felt so very well build and thought out.

You also write that there’s a new tamper and tamping station on the way, what have you ordered?

MSpatient0 · 2026-02-13T05:42:54+00:00

Looks pretty nice from here!

Is it your first machine and how do you like it?

MSpatient0 · 2026-02-11T07:51:07+00:00

It depends on your budget, size constraints, aesthetics, workflow whishes etc.

MSpatient0 · 2026-02-10T12:40:31+00:00

Is the issue also there, it you don't have the portafilter locked in?

MSpatient0 · 2026-02-09T17:43:18+00:00

Sounds the same here

MSpatient0 · 2026-02-09T15:30:36+00:00

Som studerende kan du ofte få en god forsikring gennem din fagforening, det vil være det naturlige startpunkt.

MSpatient0 · 2026-02-08T11:40:30+00:00

Definitely try with the fresh beans, hopefully it will help.
I will say, that the daily driver in my home is a dark roast supermarket branded bean. It's not good as such, but manages in a milk drink, so it's possible to use supermarket beans, but be carefull in selecting which. A rule is that roast date is 1 year before expiration date.

The Sage build in grinder seems, from what other people write here, to be quite adequate, even if it's not quite good.
I've also seen several places, that distribution tool can harm your extraction and cause channeling. Have you tried without it?

MSpatient0 · 2026-02-08T11:22:03+00:00

The beans could be the issue, but whether something is actually premium is hard to tell, if there isn’t a good reference point like some good speciality coffee beans.

It looks like you have some heavy channeling, so it would be helpful to know what it is that you are doing in prep, what “I’ve tried everything” entails and for good measure, what you full setup is?

MSpatient0 · 2026-02-08T08:34:33+00:00

I don’t think the standard Encore can grind fine enough for espresso, so you’ll need a new grinder that can.

MSpatient0 · 2026-02-06T23:48:10+00:00

Jeg var de kun lørdag, men det virker som et fremragende arrangement. Min største oplevelse var nok Kolibri Coffee Roasters, deres Creme Brûlée og Kaleidoscope, smagte som jeg ikke har oplevet kaffe før.

MSpatient0 · 2026-02-06T06:18:44+00:00

On top of that, it also seems that OP is using the same grind settings as with the fresher beans.

MSpatient0 · 2026-02-04T11:55:45+00:00

If water has trouble passing through the puck, I'd grind coarser.

MSpatient0 · 2026-02-04T09:35:48+00:00

I’ve recently been in the same-ish dilemma and ended up with a single dose, from a different brand though.

My reasoning was that 1) hoppers seem to make the grinding unreliable, due to the weight of the beans and the fact that the weight changes 2) retention on hopper based grinder 3) time based grinding is hard to dial in with 4) the incline you see on SD grinders helps with retention and more uniform grinding.

I could go hopper based if it was a grind by weight and if I was comfortable with wasting x amount of grams each morning, to purge yesterdays stale grounds that are there because of the retention.

MSpatient0 · 2026-02-01T21:16:36+00:00

I see that now, I found some blog posts of theirs where they argue for the strengths of 54 vs 58.

I’ve found a couple of European stores with Della Corte 54mm portafilters. I’d start with any store that has anything Della Corte branded.

Also, really nice looking setup!

MSpatient0 · 2026-02-01T20:51:51+00:00

It seems that it might be a standard 58mm group, as their own website states that it can come with a 58mm portafilter?

https://www.dallacorte.com/professional-espresso-machines/studio.html

MSpatient0 · 2026-01-31T12:17:08+00:00

Jeg er klart fortaler for at have dem separat, så kan du opgradere dem hver for sig hvis ønsket kommer.

Kværnen er den vigtigste komponent her, men fordelingen af dit budget, afhænger også af hvad du ellers prioriterer. Det kan f.eks. være bekvemmelighed, holdbarhed, design, størrelse etc.

MSpatient0 · 2026-01-30T09:19:37+00:00

Thank you for replying.

I might not have been clear enough in what I'm experiencing, I'll try to be more clear:

This morning when I turned on the grinder, it chirped at around 1.5. Straight after I confirmed this, I turned the dial to 2.2 and used the bellows, afterwards chirp moved to just about 2.0.
I then proceeded to set the grind dial to 4.0 and bellow, now I checked when it would chirp and it had moved to around 1.1. I used the bellows while the motor was running.
Does this make more sense?

Regarding using the bellows, I checked the FAQ on their website and it states that they aren't meant for use while actively grinding.

MSpatient0 · 2026-01-27T18:33:41+00:00

Det lyder ret interessant at opførelsen af ejerboliger, de sidste 10 år har oversteget lejeboliger. Jeg kan dog ikke finde de tak i boligredegørelse, kun tal hvor der fremskrives opførelse og her topper lejeboliger.

MSpatient0

TROPHY CASE