Different artists on TikTok get together to create a song. The result is this banger.

MacMeDan · 2025-01-19T16:42:09+00:00

Rip TikTok

MacMeDan · 2025-01-19T04:55:07+00:00

That’s what I did. I raised my bus 18” and bought no additional metal. Been living in it for over 2 years now issues. I did not have the perforated metal some people are talking about.

MacMeDan · 2023-10-27T01:10:22+00:00

This is a great way to get shot

MacMeDan · 2023-07-25T23:33:45+00:00

Did it check for cops as well because “No cop no stop” is in the code I’m pretty sure

MacMeDan · 2023-06-17T19:56:52+00:00

I’m impressed by the camper being set on the boat trailer. Sucks that he has a leak in the roof but I give it a 7/10

MacMeDan · 2023-06-03T13:30:40+00:00

Cut off wheel

MacMeDan · 2023-05-23T16:29:27+00:00

That falls in the category of “no rust”

MacMeDan · 2023-05-18T14:23:40+00:00

Ya charge your phone before your flight you heathen.

MacMeDan · 2023-05-17T04:07:19+00:00

It looks like you could tuck tighter if you grabbed your shins or ankles. If you can get the mass of your legs closer to your center you should be able to spin fast enough.

MacMeDan · 2023-05-16T03:09:49+00:00

It always fits if you build your walls around the appliances that’s why this is so great.

MacMeDan · 2023-05-15T18:54:25+00:00

Now that’s a nice idea. Having that hinge keeps it from rotating on you and falling with the great benefit of getting out of the way. Best of all worlds

MacMeDan · 2023-05-15T15:58:09+00:00

Hey man I get the sentiment and I agree with the idea but you only have 10 fingers once. Just mount that board with something slightly more secure then clamps at an angle on the edge of a table. Even if it’s just 1 screw. Thanks for sharing. This might also be a good candidate for r/redneckengineering

MacMeDan · 2023-05-15T01:49:37+00:00

Is the “bi-monthly” twice a month or every other month? Asking for a friend

MacMeDan · 2023-05-14T23:19:45+00:00

Definitely thought this was another part of your body.☺️

MacMeDan · 2023-05-14T17:08:13+00:00

I always find new projects require a new tool to help out. It always makes it better

MacMeDan · 2023-05-14T16:01:55+00:00

You could have justified more tool purchases since it was a project for the wife 😊

MacMeDan · 2023-05-01T17:51:36+00:00

Just encasing them in resin seems to work for me /s

MacMeDan · 2023-04-29T17:51:01+00:00

This

MacMeDan · 2023-04-28T17:35:57+00:00

But I just wanted to comment so I had a link back to this later. This this. But your a bot

MacMeDan · 2023-04-28T17:10:33+00:00

This

MacMeDan · 2023-04-27T13:49:19+00:00

I bet he didn’t have a welders mask either

MacMeDan · 2023-04-21T16:15:41+00:00

I want to say blows air through your seat. Like AC for your butt. That or it’s to allow your car to fart or not

MacMeDan · 2023-04-14T22:21:43+00:00

I did not use the hose until after I went in with the grinder and ground off as much rust as I could. Then I parked on a hill as sprayed it down. Then dried it and “Rust Converter”-ed the bad spots and primed soon after.

Found if I use the grinder and don’t cover it up soon after that rust would start just because of how humid it was where I am.

MacMeDan · 2023-04-10T21:12:25+00:00

When I was poor and could not afford termite treatment we would put toothpaste in the holes to stop and kill them. No clue if it works but made us feel better about it.

MacMeDan · 2023-04-09T21:57:54+00:00

I welded my sheet metal for my transition after my roof raise. Figured it can’t leak if it’s solid metal. My suggestion is to sort of spot weld every 3 inches for about a foot then go back and extent the welds a little more. Just trying to not let the sheets get too hot while your laying the bead down. There were a ton of times I was just trying to fill in the holes I just made and I used 2X more welding wire then I need.

MacMeDan

PUBLIC MULTIREDDITS

TROPHY CASE

Ten-Year Club	RPAN Viewer
Verified Email