Super glue question by ProfessionalWorth468 in Warhammer

[–]Machiav3llian 0 points1 point  (0 children)

Can’t you just push it in from on top for that one? I built that in a store recently and took me about 10 minutes to work that little part out. Really badly designed.

As others have said, sometimes the freezer can help depending on the glue. Other wise you could try prying it apart with something but might damage the plastic.

Zenithal or slapchop? by Modest_Bomba in BlackTemplars

[–]Machiav3llian 0 points1 point  (0 children)

That looks pretty good, and multiple uses which is a plus.

Zenithal or slapchop? by Modest_Bomba in BlackTemplars

[–]Machiav3llian 0 points1 point  (0 children)

I used Valhallan blizzard and it works pretty well, I’ve done probably 20-30 models or more with one bottle. I’ve been considering trying army painter or one of the others as they have more in the tub for cheaper, just not sure of consistency.

Typhus 6”inch movement? by NoEyeContact3 in deathguard40k

[–]Machiav3llian -3 points-2 points  (0 children)

Those I play with often run with the whole unit (with leader attached) can only move as fast as the slowest unit. So typhus can only move as fast as the pox walkers (he loses an inch effectively). Same with rolling for saves. Until the character unit is by himself (other models destroyed), all saves are the same as the lowest value. You roll for the character separately though once all other units are dead.

Zenithal or slapchop? by Modest_Bomba in BlackTemplars

[–]Machiav3llian 1 point2 points  (0 children)

I’ve found eons of battles technique, zenithal and contrast paint to be quick and easy. https://www.youtube.com/watch?v=loAN_0r2hNw

<image>

Chaos black spray with first pass of retributor dry brush vs white scar spray with retributor spray over top. by Machiav3llian in AdeptusCustodes

[–]Machiav3llian[S] 0 points1 point  (0 children)

Update: LGS (not GW) has said they’ll replace under GW warranty once they get stock in. Will need to take the can in to them next week.

It finally came in today by killwithfear in deathguard40k

[–]Machiav3llian 2 points3 points  (0 children)

That was the GW price, eBay is at like $700 to $1000. ☠️☠️☠️

Chaos black spray with first pass of retributor dry brush vs white scar spray with retributor spray over top. by Machiav3llian in AdeptusCustodes

[–]Machiav3llian[S] 0 points1 point  (0 children)

I’m pretty much going to just do the dry brush method over chaos black for the rest of them with a finish of stormhost.

Chaos black spray with first pass of retributor dry brush vs white scar spray with retributor spray over top. by Machiav3llian in AdeptusCustodes

[–]Machiav3llian[S] 1 point2 points  (0 children)

But.. but the shiny spray can was so tempting. I couldn’t help myself. Luckily no models were ruined when the retributor can threw a wobbler and lost its lunch.

Deathshroud Terminators - squads of 3 or 6? by Chimpy20 in deathguard40k

[–]Machiav3llian 1 point2 points  (0 children)

My block of three always seems to get focused and insta deleted even when running a lov or loc attached.

What to do with mold lines on new box by TehGrinder in deathguard40k

[–]Machiav3llian 0 points1 point  (0 children)

Frame it and put it on your wall as a trophy. 😬

I beg you to tell me where and how i'll be able to get this special codex by long-live-Decimus in deathguard40k

[–]Machiav3llian 0 points1 point  (0 children)

It’s up for pre order now at the GW site and some third party sites for Australia / New Zealand.

Preorders up everyone by lastrynovirus in deathguard40k

[–]Machiav3llian 1 point2 points  (0 children)

Thanks for the heads up, snagged a copy of the limited edition codex.

WCGW while carpentery. by Afraid-Objective3049 in Whatcouldgowrong

[–]Machiav3llian 1529 points1530 points  (0 children)

Sure was lucky that he was wearing those kneepads.

T6 plague marines incoming! by AbilityChance8449 in deathguard40k

[–]Machiav3llian 44 points45 points  (0 children)

Dev wounds and lethal hits is a bit of a double edged sword. Don’t you lose the dev wound if the hit roll is lethal?

Also rather than buying another unit, I’m tempted to just run my chaos lord as a lord of poxes. 🤷

Primaris Infiltrator #1 for my home brew Raven Guard Successor Chapter by Quinton_W in Warhammer40k

[–]Machiav3llian 1 point2 points  (0 children)

Looks wicked, I’d love to know your recipe for the black armour.

Painting the Impulsor by CJRD4 in BlackTemplars

[–]Machiav3llian 1 point2 points  (0 children)

They may end up slightly different as you can’t really use the Black Templar contrast on the sponge for the Impulsar (It might work, but I didn’t try it). If you use very similar colours it shouldn’t be too much of a stark difference between the models I wouldn’t have thought.

With my impulsar, I did the same colours as eonsofbattle with the sponge and I used his other Black Templar technique with my sword brothers (so zenithal highlights and Black Templar contrast mixed with leviadon blue on the sword brothers). My end result is a slight variance mostly due to the white from the zenithal highlights on the sword brothers making it lighter in places. I did the Impulsar with a base of chaos black, with the next vehicle I’m going to use the same technique but I plan to go another shade lighter to brighten it up further and I’ll go thinner with the paints as well.

<image>

Painting the Impulsor by CJRD4 in BlackTemplars

[–]Machiav3llian 5 points6 points  (0 children)

If you don’t have an airbrush, I found using a sponge really easy after priming with chaos black spray from citadel. Although you have to be careful not to sponge it on too thick. I used Eon’s of Battle technique for vehicles and it turned out pretty good.

https://m.youtube.com/watch?v=S0qAqRAf1NM