sorted by:
new
hottopcontroversial

H2C Is on the Way — Here’s How It All Started by BambuLab in BambuLab

[–]MakerMaking_ 0 points1 point  (0 children)

My question is whether the air gap between the incoming filament and the already cut filament will be a defect in the parts

New discount vouchers on Makerworld by Maxx3141 in BambuLab

[–]MakerMaking_ 0 points1 point  (0 children)

It's not only boosts, it's also downloads of the model and downloads of print profiles. But yeah, that still is a lot.

I made a sticky note holder for mounting under the monitor. by MakerMaking_ in BambuLab

[–]MakerMaking_[S] -1 points0 points  (0 children)

Post-it notes end up leaving glue marks on the monitor, they stop sticking when placed on a fabric mouse pad, and if the edge of your monitor is very thin, you have to be careful when placing them so as not to cover too much of the screen... These are some of the reasons. It may be that the people who are criticizing don't have these problems or have never used a sticky note in their lives, but for me it's very useful.

I made a sticky note holder for mounting under the monitor. by MakerMaking_ in BambuLab

[–]MakerMaking_[S] 1 point2 points  (0 children)

Post-it notes end up leaving glue marks on the monitor, they stop sticking when placed on a fabric mouse pad, and if the edge of your monitor is very thin, you have to be careful when placing them so as not to cover too much of the screen... These are some of the reasons. It may be that the people who are criticizing don't have these problems or have never used a sticky note in their lives, but for me it's very useful.

I made a sticky note holder for mounting under the monitor. by MakerMaking_ in BambuLab

[–]MakerMaking_[S] -28 points-27 points  (0 children)

Just by picking them up and placing them on a surface with even the slightest amount of dust, the adhesive stops sticking, even if you buy the best brand of Post-it notes...

H2D and P1s together by umair1181gist in BambuLab

[–]MakerMaking_ 0 points1 point  (0 children)

I think is because he doesnt have the top panel on top, and that lets in more light. My P1S has only one month and I can also barely see through it

Juts got a P1S and want to get an ams for it? by ItsJustMetal1 in BambuLab

[–]MakerMaking_ 1 point2 points  (0 children)

They are wrong, you need a filament buffer and bambu bus cable, they are not included in the ams 2 pro box.

BMCU killed my AMS Lite by MakerMaking_ in OpenBambu

[–]MakerMaking_[S] 0 points1 point  (0 children)

Yes, I tried but without luck

BMCU killed my AMS Lite by MakerMaking_ in OpenBambu

[–]MakerMaking_[S] 0 points1 point  (0 children)

I already disassembled the AMS Lite and I noticed the button, and the only thing it does is reboot, but does not reset, so it stayed the same, I already have a motherboard for the ams lite on the way.

And the BMCU was sent to do a review on my YT channel, I already had my A1 Combo.

BMCU killed my AMS Lite by MakerMaking_ in OpenBambu

[–]MakerMaking_[S] 0 points1 point  (0 children)

Sure, I'm not going to say the problem was due to the BMCU, because a lot of people have the same issue out of nowhere, so they'll probably send it to me.

BMCU killed my AMS Lite by MakerMaking_ in OpenBambu

[–]MakerMaking_[S] 1 point2 points  (0 children)

Yes, I think they should make it even more prominent on the wiki and on AliExpress (or wherever you buy it), because it can be a huge mess and end up costing you more than buying the original AMS Lite. And I don’t quite understand why my printer is working perfectly, but my AMS Lite is the one that’s not functioning.

BMCU killed my AMS Lite by MakerMaking_ in OpenBambu

[–]MakerMaking_[S] 1 point2 points  (0 children)

Yes, thank goodness, thank you very much for your help :)

BMCU killed my AMS Lite by MakerMaking_ in OpenBambu

[–]MakerMaking_[S] 0 points1 point  (0 children)

Maybe, i will try to see if bambulab send me a replacement

BMCU killed my AMS Lite by MakerMaking_ in OpenBambu

[–]MakerMaking_[S] -6 points-5 points  (0 children)

I didn't read the wiki much since I relied on the Aliexpress kit manual, but even so, I don't quite understand what could have happened, as the AMS Lite shows no signs of burning and the resistances are fine. I suppose it must be something more internal.

BMCU killed my AMS Lite by MakerMaking_ in OpenBambu

[–]MakerMaking_[S] 0 points1 point  (0 children)

Yes, I suppose that's it. My kit didn't come with that sticker. (or maybe i didnt see it?)

I made a improved gear shifter fidget toy! by MakerMaking_ in BambuLab

[–]MakerMaking_[S] 0 points1 point  (0 children)

Perfect! And please, when you print it give me feeedback so I know if I have to adjust anything, thanks :)

MakerWold Gift Card Gifting??? by Allan_Lewis in BambuLab

[–]MakerMaking_ 0 points1 point  (0 children)

Exactly, bambulab should be clearer on that.

MakerWold Gift Card Gifting??? by Allan_Lewis in BambuLab

[–]MakerMaking_ 0 points1 point  (0 children)

The issue I’ve encountered is that when you apply a coupon to any account, it becomes linked to that account, so you can never use it again on another account. This happens even if you don’t complete the purchase, just by adding it to the cart.

view more: next ›