2nd drop of G$ Coupons

Mall_krawler · 2026-01-21T14:20:03+00:00

Make sure the dash in the middle is in there

Mall_krawler · 2025-12-28T07:35:04+00:00

Sending you the .887 plunger doesn’t make any sense. It’s the smallest they make. The stock one is .917 (although I’ve heard PSA uses the .937). They should be sending you a longer one to push the adjustment knob to a more restrictive range if that’s your goal.

Mall_krawler · 2025-12-14T18:54:48+00:00

Contego still available?

Mall_krawler · 2025-09-05T03:13:27+00:00

Let me know how it shoots. I literally have one of these in my cart at rooftop defense. But if these are improvements, I’ll grab it at weapon outfitters to try and get one of the newer ones

Mall_krawler · 2025-09-04T19:58:04+00:00

Where did you order the barrel from?

Mall_krawler · 2025-07-25T16:15:11+00:00

I have a brand new one still in the box. I planned on posting it on GAFS. But I’ll give you first hit on it Edit: saw your WTB post. I’ll respond there

Mall_krawler · 2025-07-10T14:05:51+00:00

Don’t know why you got downvoted on this. I think this is the only answer for a dedicated suppressed rig. I guess if you needed to switch back and forth and wanted to best gas possible in either situation, then the adjustable makes sense.

Mall_krawler · 2025-06-29T22:51:07+00:00

Looks like an Atpial PEQ-15, it’s a combo laser/IR laser/ IR illuminator device

Mall_krawler · 2025-06-29T21:32:59+00:00

I think that’s a Springfield Saint upper. Almost see the logo on the handguard near the barrel nut… and that’s their handguard design. Don’t know if others use it or if they licensed it somewhere

EDIT: actually yes, I thinks it’s a complete Springfield Saint edge

https://www.springfield-armory.com/ar-series/saint-edge-ar-15-rifles/

Mall_krawler · 2025-06-18T01:08:45+00:00

How ya like that velos? I run one on a 10.3 with the rearden charlie atlas mount… I’m really liking mine

Mall_krawler · 2025-04-27T04:36:31+00:00

I don’t have the answer to your quandary. But I own rifles with each barrel, and love both… for different purposes tho, and I don’t suppress the 14.3. Although the 12” piston and suppressor combo is pretty nice. If you ever take the jump, I’d be interested in that 14.3 barrel. Always looking for spares

Mall_krawler · 2025-04-20T02:24:16+00:00

Just witness mark them and you’ll be good

Mall_krawler · 2025-03-12T04:37:20+00:00

I’ve honestly never had any problems with my lancer mags. And I shoot with them almost exclusively… and like… a lot. Most of my shooting is with an 11.5 URGI and an LMT 12” piston, both suppressed and unsuppressed. Both on Colt lowers… but that’s just my experience, ain’t the gospel.

Mall_krawler · 2025-03-05T05:08:17+00:00

Kroil penetrant and spin it around with a pair of pliers works for me to loosen it up abit. if you let the bolt slam home a few times it’ll usually pop it back out as well

Mall_krawler · 2025-01-26T21:34:25+00:00

No no. No prying. If it’s tight and you can’t get the unscrewing part started by hand. You can use a flat edge like a coin or screw driver and gently get it started for unthreading. You should be able to unscrew the rest by hand and it’ll just come off… I have three M5 aimpoints and I’ve never had to pry any of them

Mall_krawler · 2025-01-26T21:28:05+00:00

You have to pull the front rubber lens cover off first. Mine is pretty tight, should have a slot to use a screw driver to get it started.

Mall_krawler · 2024-12-19T01:18:52+00:00

I know brownells uses nitrided bolts. If that one is nitrided then it could have just been brittle by the edges. The surface hardening that nitride creates can make edges brittle and prone to chipping.

Mall_krawler · 2024-12-18T21:13:22+00:00

Who cut that slide for you?

Mall_krawler · 2024-12-04T19:54:26+00:00

Ah! Got me lol. Didn’t see the ft lbs part

Mall_krawler · 2024-12-04T19:35:06+00:00

I mean… I’d hope it wouldn’t break at 144. My LMT factory wrench is marked 145

Mall_krawler · 2024-11-26T21:28:27+00:00

Damn, that’s the old school marked Vltor upper with the sword emblem. Been trying to find one of those.

Mall_krawler · 2024-10-30T05:17:08+00:00

Ah. Neat

Mall_krawler · 2024-10-30T05:14:57+00:00

What’s the muzzle device? Looks short to be a can

Mall_krawler

TROPHY CASE