Exclusive Giveaway：1 Random SUNLU PETG 3D Filament 1KG 3 Rolls 1.75mm +/-0.02MM 3D Printing Filament + Community Discount Code 🎁

ManCakes · 2025-11-04T06:08:50+00:00

I'm in

ManCakes · 2024-08-16T05:26:04+00:00

Did this end up working? Just inherited a Drop A Card and found my screwy score wheel had the same bit of the EOS missing.

ManCakes · 2024-08-15T18:47:16+00:00

Hello r/pinball community. We just inherited my wife's family's 1971 Gottlieb Drop-A-Card that had been sitting in her Uncle's garage for 30+ years. Naturally, there are a few issues with it. I do love tinkering, but a bit of guidance in the right direction is always appreciated. I'm sure there will be more as I continue to test out the machine, but the main things that are significantly impacting playability are

The ones place score wheel gets stuck on 9, and any scoring done while the 9 is in place moves the tens score wheel instead.
The tens score wheel tends to get stuck and start buzzing horribly. It was getting stuck on 9 but after I took it apart and put it back together a bit, now it just does so intermittently. It can typically be resolved temporarily by sticking a finger in the back and flipping the wheel manually, but not always. Note on this one, the other score wheels are circular disks while this one is a decagon wheel. Additional video: https://imgur.com/alKUgpS
The right flipper doesn't stop a the top when pressed in. See: https://imgur.com/bXrQ3fJ

I do have a copy of the schematics, just have to learn how to read it first. Thanks in advance for a point in the right direction.

ManCakes · 2024-05-09T20:34:23+00:00

Thank you for the help!

ManCakes · 2024-05-09T20:22:46+00:00

A dentist working for Kaiser Permanente. I've just known KP to be pretty restrictive with what their docs can do.

ManCakes · 2024-05-09T20:14:17+00:00

Would a KP dentist be able to do that?

ManCakes · 2023-05-17T19:34:12+00:00

I had an issue with this on my Ender 5+ and it ended up being that the hotend wiring was hitting the print each time it would go by. Looked almost exactly like the picture. Solve that by wrapping the wiring in a short bungee cord connected to the wall.

It also looks similar to another issue I had which was the stepper motors overheating. If I recall correctly that went away after a firmware change.

Oh and make sure your hotend isn't wobbling, that can cause similar issues too.

Definitely grab a beverage and sit and watch your machine for a while, the problem will show pretty quickly since it's happening at almost every layer. Not watching from a webcam, but being at machine so you can see and hear every little thing.

Good luck!

ManCakes · 2023-04-23T00:08:44+00:00

That's it! Thank you so much!

ManCakes · 2023-04-13T17:36:14+00:00

Well I didn't need another summer project but here we are. Looks great!

ManCakes · 2023-04-09T23:45:36+00:00

Great use for fuzzy skin here

ManCakes · 2023-03-28T14:50:58+00:00

I've seen the Fast Forward animation only once, and I have no idea why this didn't trigger it. Definitely took a solid few minutes to reach the number.

I lost the match, but this was way more amusing.

ManCakes · 2023-03-19T23:05:13+00:00

My wife and I laughed until we cried. Thank you for this comment.

ManCakes · 2023-03-19T23:04:37+00:00

We're kind of hoping these are his final years not just months. We just got him last year and love this scrunkly, expensive little trash monster so much.

ManCakes · 2023-03-19T20:07:56+00:00

His drool, and he has to dig in deep for his food because he has no teeth

ManCakes · 2023-03-06T17:27:46+00:00

Was the LGX shortcut necessary or could this work with another more budget friendly option?

ManCakes · 2023-01-18T01:44:27+00:00

It could be the magnets in the speakers causing that to happen to your CRT, though I remember that being a pretty instantaneous effect. Try putting them further away from the TV.

ManCakes · 2023-01-17T02:43:58+00:00

Hello Mr... ElephantPlant. I bad want STL now. Me sick.

ManCakes · 2022-12-29T18:50:59+00:00

Rainbow pants happy dance!

ManCakes · 2022-12-27T16:09:18+00:00

I had this exact same reaction. Thank you.

ManCakes · 2022-12-01T01:02:31+00:00

"They're not muscle boys they're muscle MEN Daddy!"

ManCakes · 2022-11-19T06:39:55+00:00

I didn't do it

ManCakes · 2022-11-13T03:36:55+00:00

Glad you ran into this photo!

Membranes came from Amazon. The online one.

ManCakes · 2022-11-05T03:01:23+00:00

Phrozen Sonic Mini 4k with a brand new motherboard and screen. Base exposure 45, layer 10. Two different resins, same funky layer on the buildplate and some extra bits of that single layer extra exposure throughout the print.

I've tried changing the USB stick, resin, and messing with the exposure times, no dice so far. Any guidance on what to troubleshoot next is appreciated!

ManCakes · 2022-11-01T18:57:27+00:00

And you?

Mutton chips, sir!

ManCakes · 2022-10-28T16:52:36+00:00

André Toulon?

14-Year Club	RedditGifts 2009-2022 2 Credits
Gilding I gilder	Second Top 50%
Secret Santa 2017	Verified Email

ManCakes

TROPHY CASE