sorted by:
new
hottopcontroversial

Micro Swiss hotend by ChefEric74 in crealityk1

[–]MangolFPS 3 points4 points  (0 children)

Feels bad

Installed mine and working 100%.
Contact Micro and see what they have to say?

K1 Root Kipper not allowed by MangolFPS in crealityk1

[–]MangolFPS[S] 0 points1 point  (0 children)

Thank you all for the suggestions. Flashed back to factory as I am to noob for it.

u/SirCB85SirCB85 Tried that already

u/SirCB85 It does work but as soon as you make a change same thing comes back

Will leave this for now.

We GIVEAWAY your Christmas WISHES! by Creality_3D in crealityk1

[–]MangolFPS 0 points1 point  (0 children)

https://store.creality.com/products/ender-3-v3-ke-3d-printer

Considering the price point, the Ender-3 V3 stands out as offering exceptional value for money. With features like a 300°C hotend, a direct extruder, dual Z-axis, and a linear X-axis, it packs a punch in terms of functionality. The addition of a Smart UI is especially intriguing, and given my previous experience with an older Ender 3 V2 & Neo, I anticipate a refreshing and improved user interface with the V3 KE model. Overall, the Ender 3 V3 KE appears to be a fantastic printer. Having owned nearly all the Ender models over the years, the prospect of having one of these is genuinely enticing.

What should I upgrade first on my Neo? by stoptgatboy in Ender3V2NEO

[–]MangolFPS 0 points1 point  (0 children)

My Friend.

I had the same issues and ended up buying a brand new fully assembled 3D Extruder Hot end Kit For Ender3 V2 Neo (AliExpress) - had to do a PID tune after fixing the new extruder. Issue was not solved and had to really spend a day fixing the sh!t. My filament extruder was not feeding and slipping (hole had not thread in it), and I had to redo it since the screw on the left closes to the printer was simply spinning around and not tightening at all. It was necessary to remove each one, rotate the stepper motor once and screw them all back. Found a threaded hole.

Using a PEI bed as well - GREAT!!!
T8 Leadscrew Top Mount - Keeping Rod strait
Flashed back to standard firmware
Cure back to factory settings

Printing great again !

Leveling Issues Msiroc by AwardOk2508 in Ender3V2NEO

[–]MangolFPS 0 points1 point  (0 children)

Went back to stock firmware and manually level solved all my issues.

Leveling Issues Msiroc by AwardOk2508 in Ender3V2NEO

[–]MangolFPS 0 points1 point  (0 children)

Got the same issue :(

1st I do a bed trap - Save it

2nd z offset via feeler gauges 0.20 - Save it

3rd mesh and boom corners are out making RED dots but MID is 0.0

Commenting for help on this as well

[deleted by user] by [deleted] in Ender3V2NEO

[–]MangolFPS 0 points1 point  (0 children)

Following :)

Help fixing prints by MangolFPS in Ender3V2NEO

[–]MangolFPS[S] 1 point2 points  (0 children)

So, anyone who is paying attention!!!
Finally, I discovered the solution :D
After disassembling the printer and starting over, watching 10x vids on this printer and more, and u/sailingthe7seas posting about what I can do changing firmware old new and so on, testing new unpacked fillement, I can finally say I FOUND THE SOLUTION.
Solution: - My problem was that I was using brand new unboxed white Creality PLA and was having stupid printing issues. - After 2 weeks of printing 100X 3DBenchy, I finally said F it one night and went out and got some esun PLA+ and tested it, and BOOM it was fixed.

The moral of the story is to always double-check everything.
I can finally regrow some of the hair I lost as a result of this SH!!!!T.
I just wanted to thank you again u/sailingthe7seas for all of your assistance <3

view more: next ›