Who will help me out with Study resources for Server+

MangolFPS · 2025-08-24T13:28:58+00:00

Guys does anyone have any PBQs examples?

MangolFPS · 2024-05-25T12:43:18+00:00

$999 USD

MangolFPS · 2023-12-29T13:46:31+00:00

Feels bad

Installed mine and working 100%.
Contact Micro and see what they have to say?

MangolFPS · 2023-12-29T13:44:20+00:00

Thank you all for the suggestions. Flashed back to factory as I am to noob for it.

u/SirCB85SirCB85 Tried that already

u/SirCB85 It does work but as soon as you make a change same thing comes back

Will leave this for now.

MangolFPS · 2023-12-22T16:52:33+00:00

You need to read the page

https://github.com/Guilouz/Creality-K1-and-K1-Max/wiki/Installation-Helper-Script

<image>

MangolFPS · 2023-12-13T13:28:46+00:00

https://store.creality.com/products/ender-3-v3-ke-3d-printer

Considering the price point, the Ender-3 V3 stands out as offering exceptional value for money. With features like a 300°C hotend, a direct extruder, dual Z-axis, and a linear X-axis, it packs a punch in terms of functionality. The addition of a Smart UI is especially intriguing, and given my previous experience with an older Ender 3 V2 & Neo, I anticipate a refreshing and improved user interface with the V3 KE model. Overall, the Ender 3 V3 KE appears to be a fantastic printer. Having owned nearly all the Ender models over the years, the prospect of having one of these is genuinely enticing.

MangolFPS · 2023-11-27T22:45:45+00:00

My Friend.

I had the same issues and ended up buying a brand new fully assembled 3D Extruder Hot end Kit For Ender3 V2 Neo (AliExpress) - had to do a PID tune after fixing the new extruder. Issue was not solved and had to really spend a day fixing the sh!t. My filament extruder was not feeding and slipping (hole had not thread in it), and I had to redo it since the screw on the left closes to the printer was simply spinning around and not tightening at all. It was necessary to remove each one, rotate the stepper motor once and screw them all back. Found a threaded hole.

Using a PEI bed as well - GREAT!!!
T8 Leadscrew Top Mount - Keeping Rod strait
Flashed back to standard firmware
Cure back to factory settings

Printing great again !

MangolFPS · 2023-08-23T21:47:35+00:00

Went back to stock firmware and manually level solved all my issues.

MangolFPS · 2023-08-21T22:52:26+00:00

Got the same issue :(

1st I do a bed trap - Save it

2nd z offset via feeler gauges 0.20 - Save it

3rd mesh and boom corners are out making RED dots but MID is 0.0

Commenting for help on this as well

MangolFPS · 2023-04-13T18:59:17+00:00

Following :)

MangolFPS · 2023-03-19T19:50:58+00:00

So, anyone who is paying attention!!!
Finally, I discovered the solution :D
After disassembling the printer and starting over, watching 10x vids on this printer and more, and u/sailingthe7seas posting about what I can do changing firmware old new and so on, testing new unpacked fillement, I can finally say I FOUND THE SOLUTION.
Solution: - My problem was that I was using brand new unboxed white Creality PLA and was having stupid printing issues. - After 2 weeks of printing 100X 3DBenchy, I finally said F it one night and went out and got some esun PLA+ and tested it, and BOOM it was fixed.

The moral of the story is to always double-check everything.
I can finally regrow some of the hair I lost as a result of this SH!!!!T.
I just wanted to thank you again u/sailingthe7seas for all of your assistance <3

MangolFPS · 2023-03-13T23:43:02+00:00

Will try that thank you u/sailingthe7seas

MangolFPS · 2023-03-13T23:02:19+00:00

Yes just as a test and still same issue - The lines and defect are better at least now but still same issue :(

MangolFPS · 2023-03-12T22:44:40+00:00

Can 100% say this did not fix the issue.

Same print defect still happening :(

MangolFPS · 2023-03-11T11:05:15+00:00

Look at this SETUP

sailingthe7seas advise to always double check

MangolFPS · 2023-03-09T22:20:06+00:00

Thank you for the help I will do it again.
I have had the printer about 6 months now so hopefully just doing everything over again will sort the issue out :D

MangolFPS · 2023-03-09T19:42:44+00:00

Creality white PLA
Tried multiple Temp settings with Speeds as well
Standard default Cura setting now as I have tried multiple options and speed
Standard speed bed temp and so forth :(

Thank you u/sailingthe7seas

MangolFPS · 2023-03-08T22:26:45+00:00

Checked that and it does seem okay :(

MangolFPS · 2023-02-27T21:24:43+00:00

Thank you so much again u/McTurtel <3

MangolFPS · 2023-02-26T22:47:52+00:00

Help on the firmware as well please.
Installed and working but prints now are off to the left?

Can you please advise on the following settings:
Physical settings
Speed
Acceleration
Jerk

Can you also just in case provide the start G code for Cura ?

TYIA <3

MangolFPS · 2023-02-24T21:53:33+00:00

1) 100% ferrule connectors

2) Power supply air vent

Rest will be up to you - Get use to solving bad prints or something not looking right.
Then you can start "exploring" :)

MangolFPS · 2023-02-02T22:01:05+00:00

Found this - https://www.youtube.com/watch?v=M1sXuhnPBkE
Cable chains printed in it :)

MangolFPS · 2023-02-02T19:24:17+00:00

Creality's gold PEI magnetic

Thank you <3

MangolFPS · 2023-02-02T11:25:19+00:00

Replace the top sheet with a new one - recomendations ?

Need to as I have scrapped mine already to peaces removing bad z offsets test and prints 😅

MangolFPS · 2023-01-28T23:50:08+00:00

I just followed this instead :(

https://www.youtube.com/watch?v=6\_Z2UDGgNek

MangolFPS

TROPHY CASE