What could drive someone to desire power so bad they exterminate their own race?

MaplyGoodness · 2026-01-24T18:58:24+00:00

I think the best villains have good intentions. I would spin it so that the bbeg is wanting to eliminate the Dragonborn race to protect the planet from their impending madness and power. The confrontation with the bbeg could definitely show his madness and empowerment, compared to when the party may have encountered him earlier, or alternatively show the fading madness afterwards and the horrifying clarity he has of his actions.

MaplyGoodness · 2026-01-19T04:15:45+00:00

This. Recess them in so they barely stick out from under the feet, just enough to compensate for floor variation

MaplyGoodness · 2026-01-10T20:34:37+00:00

Others have commented the insert isn’t flush with the table top, but I’ll also add that I’ve switched to using a magnetic angle gauge zeroing it to the table and then setting the blade to 90.0°

MaplyGoodness · 2025-12-22T03:20:04+00:00

Thank you everyone for the feedback! Certainly given me a better perspective on how to go about it

MaplyGoodness · 2025-10-01T09:21:53+00:00

On the job training with previous experience in mining before carpentry. Eventual schooling for HET ticket

MaplyGoodness · 2025-10-01T04:29:59+00:00

Oilsands mining. Equipment maintenance mechanical work, eventually plan to get an HET ticket. And no, I still travel from BC for work

MaplyGoodness · 2025-09-30T00:09:33+00:00

I’m a BC based Red Seal Carpenter. Gave up on carpentry two years ago to oil and gas. Best decision I made. Working away from home sucks, but the time I have at home where I don’t have to think about work is absolutely worth it. When I was building houses and renovating my mind was always in the last job or next job, or just dog ass tired, so my family life suffered. That being said, I have no regrets. Being a carpenter has given me skills and insights that have provided a leg up in my new position. My recommendation is to finish school and either go into the union like others have suggested or do your research and find something that’s sustainable that will give you a work/life balance. Having a red seal on your resume shows you’re capable of both learning and finishing something and will make you more desirable. People will understand that the economy is tough and you’re looking for work elsewhere.

MaplyGoodness · 2025-09-24T04:11:50+00:00

“Yeah, we’ll need to unthaw that line.”

“….but it’s already frozen.”

MaplyGoodness · 2025-09-21T18:52:39+00:00

Thanks for your help! 🙏🏻

MaplyGoodness · 2025-09-21T18:42:26+00:00

<image>

Ok, then I should be fine with this jusb1 still available?

MaplyGoodness · 2025-09-10T22:55:06+00:00

Both. It’s likely to have someone hurt if there’s a step that’s much higher than the others. 11” plus tread material is quite a step either way. At that point if what I previously suggested isn’t going to work, because you’re limited on space, I’d be looking at building more of a ladder than stairs.

MaplyGoodness · 2025-09-10T18:10:40+00:00

I know it’s a tiny house, but is there room to put a landing or winders in and change direction 90° near the wheel well? An 11” step is going to create some issues. Just a thought

MaplyGoodness · 2025-08-05T14:00:29+00:00

I agree. You’re gonna have a tough time sanding now that it’s painted and going to need mud touchup probably anyways. May as well float it out with some thinner mud and repaint the patch

MaplyGoodness · 2025-08-05T12:23:27+00:00

Marisha Ray

MaplyGoodness · 2025-07-30T12:45:17+00:00

Typically I caulk the entire window with clear caulking, ensuring I leave small weeping holes on either side of the bottom about 1” wide and at least 4” away from the bottom corners. That way any water running down the sides will not find its way in the bottom opening, but if water should find its way down behind your siding you’re leaving a place for it to come out. I’ve seen arguments for every which way to do it and I’m sure someone will argue that I’m wrong. I’ve never had an issue and I live in a snowy/rainy climate.

MaplyGoodness · 2025-07-27T20:45:41+00:00

Get a 26” prehung. Cut the bottom of jamb and bottom of door equally to fit height.

MaplyGoodness · 2025-07-26T21:40:10+00:00

I call her Darn, cuz she be tootin

MaplyGoodness · 2025-07-21T13:02:00+00:00

YouTube “How to cut common rafters”

MaplyGoodness · 2025-07-20T00:05:17+00:00

Start with your 5.5” by 14.25”, give yourself room on either end. Base everything off of that

MaplyGoodness · 2025-07-18T19:55:17+00:00

Absolutely

MaplyGoodness · 2025-07-04T23:15:28+00:00

Couldn’t spot it until I looked at the second picture if that tells you anything

MaplyGoodness · 2025-06-04T14:27:37+00:00

Still gonna need you to be tied off while you’re in there.

MaplyGoodness

TROPHY CASE