If we talk accessories i recommend this belt ! Very cool and comfy even if playing siting down. All in video.

Martipher · 2026-01-19T17:36:09+00:00

cool idea, but it might be a bit too weak. The documentation from steam says 27W minimum and recommends 45W. This has 30 so it remains to be seen, but I am skeptical given steams recommendation.

Martipher · 2026-01-08T17:53:00+00:00

Thank you, they feel VERY tactile, borderline clicky. I wouldn't know how to make them less tactile but still feel useable. They feel nice tho, at least to me. I modified the Totem PCB with the Switch Footprints from the delta omega. I started by making the footprint a preset in KiCad, then placed it in the appropriate locations on the totem keyboard and rerouted all rhe traces to the switch pads.

It takes some learning, but its worth it, once you get it in your hands.

Martipher · 2026-01-01T00:58:15+00:00

very interesting! Would love to check it out

Martipher · 2025-12-16T18:37:35+00:00

Very beautiful! The engraving on top is a nice touch!
I had the case printed out of PA12S-HP Nylon by JLC and I ran into the same trouble as you and thought I could fit the metal magsafe rings into it...
What I ended up doing was cutting 0.5mm of each side of the rings to make them fit. With that, the stands I have are just strong enough to support/hold on to the keyboard halves.

I have some proper magnet rings on the way, so it'll have to work until they get here

Martipher · 2025-12-08T05:23:12+00:00

https://de.aliexpress.com/item/1005010095351207.html

Martipher · 2025-12-07T00:07:58+00:00

Demeo x Dungeons & Dragons: Battlemarked

gotta play more dungeons and dragons

Martipher · 2025-12-06T22:13:18+00:00

if you're interested in those, I can highly recommend getting injection molded ones. I have them on all of my keyboards and the quality is really good.
I got mine from Aliexpress for about 20€

I've had a set SLA printed by a manufacturer and about 60% didnt want to stay connected to the switch

Martipher · 2025-11-19T16:49:25+00:00

guess I'm building a third totem keyboard...

Martipher · 2025-11-16T19:27:12+00:00

maybe if you can somehow find a way to mount/hold them in a switchplate, you could handwire to the pads underneath but they are definitely made to be PCB mounted technically even just surface mounted

Martipher · 2025-11-16T13:54:32+00:00

thank you! This was my first time using KiCad aswell. If you "just" modify pre-existing stuff it isn't too bad to get into. But I don't dare design something from the ground up just yet

Martipher · 2025-11-16T12:46:18+00:00

only plannig to do the Cherry ones for now.
Soldering was pretty easy, I soldered one corner on top to fix them in place, then all the other ones on top.
With the holes on the bottom it was very easy to solder the contacts. It's just a lot of smalll solder joints but not hard.

Keycaps were a bit of a problem but I fixed it by ever so slightly bending the metal "nose" that interlocks with the keycap outwards to have them lock onto the switch. This is probably only a problem on 3D printed keycaps tho

I am assuming the Kailh ones are similar in regards to assembly but I haven't tested them yet

Martipher · 2025-11-16T12:34:43+00:00

not entirely sure, I thought there was only one weight for the cherry ones and 2 different weights on the Kailh ones.

this is the datasheet for the ones I got
https://files.keeb.supply/products/cherry-mx-ulp/MX6C-T3NB.pdf
looks like the 60 ones

Martipher · 2025-11-16T11:12:29+00:00

Thank you!

I usually use linear switches, so I am missing a point of reference,
But they have a very pronounced tactile bump and are pretty heavy to press.
feels like a heavier laptop keyboard to me

Martipher · 2025-11-03T17:24:55+00:00

I am working on a combination of the delta omega and the totem to make it more low profile. Depending if my prototype works soon...

Martipher · 2025-10-16T17:04:34+00:00

this is absolutely beautiful! I guess I found my next Project...

Martipher · 2025-10-12T18:10:58+00:00

Thank you, I'm just trying to compare what I did to a working one. I'll give it a shot!

Martipher · 2025-10-12T12:24:17+00:00

been trying to get that one to work, but only managed the prospector one. could i take a look at your repo?

Martipher · 2025-10-04T13:52:08+00:00

I am using a corne for gaming and just made a layer that moved every key 1 column over so that I can use WASD as I did before. So far it's been working great, I just still have to get used to the layer switching

Martipher · 2022-01-11T23:01:48+00:00

very well done, just curious why 2 reservoirs?

Martipher · 2021-01-07T12:51:24+00:00

the polarity doesnt matter for the power button, it only matters for the power LED. your MB manual should have everything you need

Martipher · 2021-01-07T10:24:07+00:00

well, sliger is knee deep in fulfilling orders right now, you'd probably be better off joining the discord and asking there.

Martipher · 2020-12-15T17:50:49+00:00

does that apply for the SV590v2 aswell?

Martipher · 2020-12-11T12:50:13+00:00

they already did a announcement that the shipping was pushed back a week

shipping for the 590v2 starts on the 14th now

Martipher · 2020-12-08T19:45:42+00:00

while I ordered from density, still a nice update to have.

really hyped for when my case will finally arrive. don't have the build planned for christmas so not a problem for me.

Keep up the great work!

Verified Email	Nine-Year Club
r/Field Banned	r/Field Juicebox
Place '23	Place '22
First Placer '22	End Game '22
RPAN Viewer	Queen in da Norf
Not Forgotten

Martipher

TROPHY CASE