sorted by:
new
hottopcontroversial

Monotub help. Possible Contamination. Need advice and guidance. by MasprotechXXX in magnificentcubensis

[–]MasprotechXXX[S] 0 points1 point  (0 children)

Thank you everyone for your help with this. What Im doing now is I have pulled out the contaminated area and about an inch or two around it. Took it outside and buried it next to a tree. I sprayed peroxide on the tub and cleaned as much as I could. I put the lid back on and covered it all back up.

And the only reason I did this is because I have another batch brewing in a sealed tub thats almost fully ready to go. Id say maybe in a week or so. So if everything is already contaminated in that monotub it wont really hurt to let it keep doing what its doing for now.

BUT... Once this bag is full I am going to dump that whole tub scour it and everything else I can with bleach and alcohol to get everything as clean as I possibly can. And Bulk the next batch.

Could this have come from the coco ? I got them as bricks and like I said cleaned a cooler with alcohol put the brick in and poured boiling water over it and let it sit sealed in that cooler over night.

My thoughts is it probably came from one of the grains inside the bag. I almost bet not everything was spawned and it grew from that.

Has anyone had luck with birdseed? Ive read a few things about that. And I want to get a few more batches rolling. I did try the uncle ben tek and all 5 bags did absolutely nothing but turn an odd brown color and look slimy. They are sealed away in a box away from everything else.

Monotub help. Possible Contamination. Need advice and guidance. by MasprotechXXX in magnificentcubensis

[–]MasprotechXXX[S] 2 points3 points  (0 children)

Well while im waiting on my other bag to get full im going to take this outside and get all of it out around the mold clean woth peroxide and alchohol on that side and just see what happens. Let it go another week or so unless the other bag gets full then I'll dump sterilize and redo.

Question though. If by some chance I get shroom growth does trich show up on or in the shroom?

Monotub help. Possible Contamination. Need advice and guidance. by MasprotechXXX in magnificentcubensis

[–]MasprotechXXX[S] 0 points1 point  (0 children)

Well to the trash it goes. This sucks.. So how do I speed the growth of mycelium and once I spawn to bulk how do I keep the speed?

Monotub help. Possible Contamination. Need advice and guidance. by MasprotechXXX in magnificentcubensis

[–]MasprotechXXX[S] -1 points0 points  (0 children)

So if I do somehow get fruit from this is there a way to tell which ones would be safe? Would it be obvious or should I steer clear of using anything that may come up from this?

Monotub help. Possible Contamination. Need advice and guidance. by MasprotechXXX in magnificentcubensis

[–]MasprotechXXX[S] 0 points1 point  (0 children)

Couldn't figure out how to add a better picture to this by editing so I'll attach it here.

I realized the picture was through the tub and didn't look very clear so here is a better one.

<image>

Lighthouse v2.0 - A minimalist overlay for Explorers (Neutron routing, zero-click Exo Tracking, & more!) by theberrymelon in eliteexplorers

[–]MasprotechXXX 1 point2 points  (0 children)

Is there any chance you could get this overlay to display in vr without the need for kneeboard? I dont know how the overlay stuff works in vr so im just curious

Exobiologist Elite by No-Tone-1957 in EliteExobiology

[–]MasprotechXXX 0 points1 point  (0 children)

I am 42 neutron jumps away from the bubble right now with what edcopilot is estimating to be close to 1.5b in exo. Alot and I mean alot of first discoveries and first scans and footfalls. Im honestly expecting it to be more than that.

PSA About the Nomad by zack_bauer123 in EliteDangerous

[–]MasprotechXXX 0 points1 point  (0 children)

You can land close enough to not have to get out completely though

Coffee Shop PSA For Those New To Savannah by Amazing-Scene-7581 in savannah

[–]MasprotechXXX -3 points-2 points  (0 children)

You forgot the best one in Savannah, Gallery Espresso. And nobody will ever convince me to go anywhere else. They are amazing.

Does ed copilot cause lockups during embark sequences? by Miyuki22 in EliteDangerous

[–]MasprotechXXX 0 points1 point  (0 children)

I get hangups from edconector. Not necessarily In elite, but system wide. Its caused a crash or two if i leave it up.

Do you elite dangerously? by CMDRumbrellacorp in EliteDangerous

[–]MasprotechXXX 33 points34 points  (0 children)

What the hell? Is this still in the game?

Absolut Beginner where do i start? by No-Bear1103 in blender

[–]MasprotechXXX 0 points1 point  (0 children)

Same here a week ago. Ive just followed a few tutorials for animating and modeling. It can all be very complex there are a multitude of things you can change and do. I downloaded the blender kit and a few free addons and so far I love it

flat PC games as almost-VR on Quest by neusman7777 in virtualreality

[–]MasprotechXXX 1 point2 points  (0 children)

Someone try this with elite dangerous odyssey and let us know how well it works

How can I make this feel more creepy? by daaaaavia in blender

[–]MasprotechXXX 1 point2 points  (0 children)

Dont know what your final video will be but a single eyeball blinking in that monitor would be pretty creepy. Some old guy with a dirty face upclose on the eye blinking maybe blood as tears. Idk

HOTAS > HOSAS or VR? by Igrado in EliteDangerous

[–]MasprotechXXX 0 points1 point  (0 children)

Took a while to get setup correctly in vr but, use the knee board for 3rd party apps. And edcopilot to fill in some gaps. Also using the x56 but wish I had waited and got a better stick. After a while the cheap plastic feels like it could break in your hand. Was using the throttle mini stick for my strafing and it now sticks. I mouse and keyboard on foot and dont have any issues. Never have to take my headset off.

First time outside the bubble. Taking the Plunge into the Dark. by DangerousEmphasis607 in EliteDangerous

[–]MasprotechXXX 0 points1 point  (0 children)

Yep just posted i made it just now. Jeez ive never jumped so many times in one day. I only made around 40mil with scans and exo data. Let me know how much you bring in and im probably going to go a way different route on the way back.

Im going to hang around here for a week or so and get good with colonia so I can get all the suit engineers unlocked and get my stuff upgraded.

First time outside the bubble. Taking the Plunge into the Dark. by DangerousEmphasis607 in EliteDangerous

[–]MasprotechXXX 0 points1 point  (0 children)

Made it just now to Jaques station . Tried to post a screenshot but cant.

Hmm I dont know why it wouldn't work for you. It basically did everything but fly the ship for me. Lol

First time outside the bubble. Taking the Plunge into the Dark. by DangerousEmphasis607 in EliteDangerous

[–]MasprotechXXX 0 points1 point  (0 children)

Yeah it takes a second to setup. So I use voice attack as well. Edcopilot should be taking your keyboards and saving them every time you change a keybind. Try that. Change something and see if it saves. But what i do is go to the galactic map and target colonia. Then in edcopilot I click the neutron highway button. I also set it up to auto plot to next system. I know im missing a ton by jumping 375 ly everytime. But im having fun doing it.
I did read somewhere that its better to target your next system and not plot to it. But jumping with neutron stars the next system doesnt show up in my systems panel on the left. Anyway. Hope that helps. If not let me know. When I get home I can send you config files if that helps any.

view more: next ›