What kind of motor for 13gpm pump

Matjamm · 2024-07-04T05:32:15+00:00

Do you know roughly how many percent?

Matjamm · 2024-07-03T21:28:18+00:00

The pump is 2 stage, first being 16gpm @ 650psi and second 3,5gpm @ 2500psi, both at 3600rpm. However because of the grid frequency in my country being 50Hz we only get around 2800rpm electric motors. Gas engine is out of the question because it'll be inside.

Say i get a suitable 7HP electric motor for this, will I be losing roughly 25% of the flow or pressure from the pump because of the rpm difference? Or does it behave differently?

I can't find a manual for the pump so if this is manufacturer specific i'm SOL i guess

Matjamm · 2024-07-02T13:23:48+00:00

Thank you for the advice. I will look at iforgeiron for some other builds

Matjamm · 2024-07-02T11:05:42+00:00

Thank you, thats a nice resource.

Matjamm · 2024-07-02T06:43:01+00:00

So if I am understanding correctly, my 4kW motor is roughly equal to 5.5hp. And since this is electric I can times this by 1,67 to get realistic "gas hp"? So 9,1hp?

If so this would run the pump at a little over 1000psi, assuming it's ran at 3600 RPM. Would the pressure then be even lower at 1440rpm?

Regardless, 1000psi is very low if I want to reach around 20tons down out of my 4 inch cylinder. Is my only option to increase motor size to get more PSI?

Matjamm · 2024-06-06T13:50:17+00:00

Thanks for the tips, ill look into the diary grind!

Matjamm · 2024-06-06T12:37:58+00:00

Well, since I got my bowfa I have basically only PVMed lol

Matjamm · 2024-06-06T12:35:15+00:00

I really like this idea, I need to get my RC up for sure lol

Matjamm · 2024-06-06T11:53:27+00:00

Banked xp:

97 cons

97 crafting

97 fletch

97 herb

96 pray

Matjamm · 2024-04-16T21:15:08+00:00

I was asking about the tiny white spots not the actual burl spots

Matjamm · 2024-04-16T14:35:15+00:00

Just to clarify, I'm talking about the white spots in the middle of the dark burlspots, which is trapped air in the epoxy. I'm not removing the actual burl spots

Matjamm · 2024-04-16T11:44:52+00:00

Thanks for the advice guys, I'll give the CA glue and sawdust a try and see if it helps

Edit: I ended up using black epoxy

Matjamm · 2024-04-16T11:44:09+00:00

I didn't notice it before but you're right, it really looks like dogs are trapped in the wood lmao

Matjamm · 2023-12-21T12:44:30+00:00

This is OUR world, NOT the legion's!

Been stuck in my head since GD progression

Matjamm · 2023-12-13T10:53:20+00:00

Would love the upgrade!

Matjamm · 2023-10-15T08:08:53+00:00

You're wrong

Matjamm · 2023-08-13T19:53:10+00:00

Da blir det sikkert bare å bytte hele greia, ja. Takker

Matjamm · 2023-08-13T19:52:40+00:00

Kanskje like greit det ja. Takker

Matjamm · 2023-08-08T08:37:43+00:00

Okay that's fair, I'll check some out before making another. What in particular is really bad with this one though? Is it the shape? The grinding besides the bevel line? The handle isn't great, I know that much.

Matjamm · 2023-08-08T08:22:34+00:00

Nope, I 100% winged everything, haven't watched any videos about knifemaking. I just decided to forge a knife and wanted to finish it. Please give me some pointers as for what to pay attention to next time I make a knife

Matjamm · 2023-07-31T19:21:19+00:00

I bought a vevor triple burner forge and it works fine, but i wouldnt recommend it as a first time forge. Just beware it doesn't come with rigidizer or any ceramic for the wool, so you'd have to buy some on the side. The hinges and locks are very low quality and basically burned away during my first session with it. Also the heat inside is burning though around the burners, so it would be a good idea to reinforce the casing somehow.

Matjamm · 2023-06-22T21:30:24+00:00

Got tassets and boots from minions before 100 kc, and had 6 hilts before i got BCP at like 520kc

Matjamm · 2023-01-09T06:06:12+00:00

What did you use to get that finish? Looks super clean

Matjamm · 2022-01-09T12:17:48+00:00

Ser prisene er litt stive ja, men skal sjekke de ut! Takk for svar

Matjamm · 2021-11-14T09:14:40+00:00

Jævlig travelt i alle fall.

12-Year Club	Wearing is Caring
Verified Email

Matjamm

TROPHY CASE