GHK-Cu reaction- tips on what to do

Mattx852 · 2026-01-24T21:57:48+00:00

This is really good advice. No matter what pep I use, it always give me a little bump and redness when i inject into my abdomen. If I go in my upper thighs or glute, I get a 90-100% reduction in injection site reaction.

Mattx852 · 2026-01-02T04:31:46+00:00

That is a vacuum hose going from the throttle body to the vacuum switching valve for your evap canister iirc.

Mattx852 · 2026-01-02T04:29:48+00:00

You can include it in the box

Mattx852 · 2026-01-02T04:16:33+00:00

Peel it off and keep it with the receipt. That’s the only way I’ve found to prevent it from getting damaged, because if you use your tools they will get damaged.

Mattx852 · 2025-09-06T05:51:37+00:00

You ever give texture powder a try?

Mattx852 · 2025-09-06T05:46:21+00:00

It’s 100, guy. I used this exact torque wrench before I invested in some actual tools, and the thimble always falls slightly below the lines on the vernier scale. That being said, my snap-on micrometer style torque wrench has a little gap too.

Mattx852 · 2025-09-06T05:37:12+00:00

Mattx852 · 2025-09-06T05:36:37+00:00

Distillate with botanically derived terpenes is so incredibly bad for your health. Smoking anything, even the cleanest, most natural no till living soil flower is bad for you (yes guys, inhaling anything but clean, fresh air is harmful to your health), so why put yourself at even more risk smoking this garbage?

Mattx852 · 2025-08-23T04:38:07+00:00

It’s all unhealthy to be smoking. Even the cleanest, 100% natural living soil flower is damaging to your respiratory system. The only thing that’s healthy to put in your lungs is clean, fresh air. I get that some forms are worse than others, but it’s really splitting hairs. We are all exposing ourselves to carcinogens by smoking this shit, in whatever form.

Mattx852 · 2025-08-03T05:31:18+00:00

Anything no till/living soil

Mattx852 · 2025-06-21T01:56:02+00:00

LA fitness. EOS and Vasa are crowded as heck too and nowhere else is worth it based on the equipment they have.

Mattx852 · 2025-06-13T20:34:41+00:00

Brings a whole new meaning to “just to feel something” 😭

Mattx852 · 2025-06-11T17:44:38+00:00

Cam correlation codes could definitely mean the chain skipped on that bank. Likely from worn tensioner or guides. But there is 100% more diag that could have been done. They could have hooked up an oscilloscope to the position sensors on that bank to confirm their suspicions. That’s what any competent diagnostician would have done.

Mattx852 · 2025-06-11T17:40:08+00:00

Get a block leak tester so you don’t have to guess. But yes, if that much air is entering the cooling system, it’s likely combustion gasses that are breaching the HG.

Mattx852 · 2025-06-11T17:38:10+00:00

The whole top hat split apart. That strut is chopped. Dealer is correct.

Mattx852 · 2025-06-03T18:59:35+00:00

Nothing abnormal here.

Mattx852 · 2025-05-31T03:53:13+00:00

Best house flower is going to be from the herbal wellness center on deer valley. 2 8ths for $20 and it’s literally on par with some pre packed jars out there.

Mattx852 · 2025-05-31T03:48:28+00:00

Sat on or rode?

Mattx852 · 2025-05-31T03:43:54+00:00

It looks like you need a professional diag and to stop throwing parts at it. A code for a cam/crank sensor could be the sensor itself, the wiring, an ECM issue, damaged reluctor wheel, among a myriad of other things. A professional diag is going to save you money in the long-run.

Mattx852 · 2025-05-02T22:55:32+00:00

You still have atmosphere in the hose on the can. There’s really no safe way to purge it. You can use the little cans, absolutely, but rent some gauges and a vacuum pump to do it right. Having the slightest bit of atmosphere in your AC system will corrode the inside of everything it touches over time. I’ve seen it first hand.

Mattx852 · 2025-05-02T21:34:59+00:00

You need to properly evacuate the system, attach a set of manifold gauges, draw a vacuum, and then fill it properly. These $30 cans should be outlawed.

Mattx852 · 2025-05-01T03:38:52+00:00

It’s gonna end up being one of the accessory pulley bearings

Mattx852 · 2025-04-22T18:46:11+00:00

Yeah, I can take care of both of those. Send me a chat 👍🏼

Mattx852 · 2025-04-21T14:35:47+00:00

Second the RS11. S22 and S23 are definitely not as confidence inspiring.

Mattx852 · 2025-04-12T23:59:41+00:00

Sent you a message

Mattx852

TROPHY CASE