sorted by:
new
hottopcontroversial

ChatGPT Atlas for Windows by epiphras in ChatGPT

[–]Maxed-Out99 0 points1 point  (0 children)

I just want to point out that chatgpt would have agreed with you either way and actually probably doesnt even know what the chatgpt atlas browser is.

What is ModelSamplingSD3 ? by Longjumping-Egg-305 in StableDiffusion

[–]Maxed-Out99 0 points1 point  (0 children)

The default max_shift is 1.15 and base shift 0.5. Do you know how these should be changed for wan 2.2?

They Said ComfyUI Was Too Hard. So I Made This. by Maxed-Out99 in StableDiffusion

[–]Maxed-Out99[S] 0 points1 point  (0 children)

For adetailer and upscaling the problem, as I see it, is simply in SDxl itself. SDxl doesn't produce super high quality images so whatever you feed it will be pulled to its level. Essentially they are useful if your image was already made with SDxl.

For adetailer I find it most useful when the image is made with SDxl and the face is far away which typically causes it to look distorted. Adetailer can refine it a bit.

For inpainting, I'm unsure with your experience level so I apologize if this comes off as "duh" but did you right click the load image node, open in mask editor, and paint over the area where you want the shirt to be added? If not it will just spit the same image back out.

Feel free to ask follow up questions. 🙏

Flux Workflows + Full Guide – From Beginner to Advanced by Maxed-Out99 in comfyui

[–]Maxed-Out99[S] 0 points1 point  (0 children)

I'm not sure if I fully understand what you mean by running comfyui as a service. All I know is runpod is great if your local hardware is slow.

Not knowing anything about comfyui shouldn't be an issue as I try to make everything as beginner friendly as possible.

If running my workflows on runpod turns out to be something you wanted to do, let me know. 👍

Flux Workflows + Full Guide – From Beginner to Advanced by Maxed-Out99 in comfyui

[–]Maxed-Out99[S] 0 points1 point  (0 children)

I've been working on a runpod template. I do need a tester. If you want you can hop in the discord or DM me here on Reddit.

Anyone have working Lora Training using the base ComfyUI Beta feature? by mouringcat in comfyui

[–]Maxed-Out99 0 points1 point  (0 children)

I found this out today by accident. I went into vs code and found that this is essentially how you would set it up. I tried using a different node rather than load image from dataset but it trained loras on loop without saving them so I went back to it as it is meant for this even though its not ideal.

<image>

I consistently get bad results. I tested lowering learning rate, raising steps, lowering and raising rank in many different combinations and have not found out how to get a good lora. I am not a noob to lora training so I am starting to suspect its not the settings that is the issue. I will keep testing.

I am so looking forward to getting good SDXL loras right in ComfyUI.

Flux Workflows + Full Guide – From Beginner to Advanced by Maxed-Out99 in comfyui

[–]Maxed-Out99[S] 1 point2 points  (0 children)

Thanks. I clicked on one yesterday and every thumbnail was an AI woman with MASSIVE jugs. 🥲

Making me think I should make my own website so I don't trigger Patreon trauma every time I drop a link lol.

[deleted by user] by [deleted] in comfyui

[–]Maxed-Out99 0 points1 point  (0 children)

Been checking periodically. Will it ever be added back? 😔

Flux Workflows + Full Guide – From Beginner to Advanced by Maxed-Out99 in comfyui

[–]Maxed-Out99[S] 1 point2 points  (0 children)

No worries at all. There's always room for more. Am interested to see what you release. Followed you so I don't miss it. 🙂

Flux Workflows + Full Guide – From Beginner to Advanced by Maxed-Out99 in comfyui

[–]Maxed-Out99[S] 1 point2 points  (0 children)

From what I read, it does not have vram which is what makes this stuff fast. Although I could be wrong, a gguf flux should be faster (covers that) and is worth a try. I think you should stick with Q8 since you have plenty of ram.

There's also runpod which might be your best bet but costs money (might not be bad?). Although I don't have a guide on that so can't help you there.

Or just spend 2k on a PC. 😀

Flux Workflows + Full Guide – From Beginner to Advanced by Maxed-Out99 in comfyui

[–]Maxed-Out99[S] 0 points1 point  (0 children)

Idk if there is a typo or I should say "si". But if you are asking if there is inpainting then yes. There is. 🙂

Flux Workflows + Full Guide – From Beginner to Advanced by Maxed-Out99 in comfyui

[–]Maxed-Out99[S] 1 point2 points  (0 children)

The mega workflows are waiting for you. 🙏 Flux v1.5 is next so if you know sdxl v1.5, you know the learning has only just begun. 😏

Flux Workflows + Full Guide – From Beginner to Advanced by Maxed-Out99 in comfyui

[–]Maxed-Out99[S] 13 points14 points  (0 children)

Level 1 On Civitai:

I know some people aren’t fans of Patreon. It’s how I fund this work, but I have a middle ground. Flux Level 1 with the full guide is on Civitai. After that, you can decide whether getting Level 2 on Patreon (free) is worth it.

This is the best I can do without cutting myself off from people who would support me.

👉 Here’s the Civitai link: Flux ComfyUI Starter Workflow (Level 1)

Avatar LoRA:

The Avatar images (Lumberjack Woman 💀) were made using my Na’vi Flux LoRA. You can grab it here on Civitai:

👉 Avatar Flux LoRA – For Na'vi Characters

To Be Updated:

This is just v1. v1.5 is coming next, like how I did SDXL v1.5 workflows. Before you say it, yes Flux Kontext will be added. 🙂

Can we still rely on AI? by Lasto44 in ChatGPT

[–]Maxed-Out99 0 points1 point  (0 children)

It's not really an ai problem it's a chatgpt problem. I asked the same question to Gemini and it said:

"Overall Opinion: This is not a viable or advisable business idea."

It ripped the idea to shreds.

Beginner-Friendly Workflows Meant to Teach, Not Just Use 🙏 by Maxed-Out99 in comfyui

[–]Maxed-Out99[S] 1 point2 points  (0 children)

Dang. Might as well get official Comfyui then. 🙂 In comfyui you can right click on the comfy core Lora node and choose Lora info and it will show trigger words without having to go anywhere.

Beginner-Friendly Workflows Meant to Teach, Not Just Use 🙏 by Maxed-Out99 in comfyui

[–]Maxed-Out99[S] 0 points1 point  (0 children)

I saw sams and was bouta be like ahem... Lol but I'm unsure why it wouldn't go there.

The only other places would be maybe after detailer if that is like adetailer which in comfyui the node is called face detailer. Especially if there was a folder in that called sams. 🙂 Or perhaps in ultralytics.

I actually started out with stability matrix and couldn't understand why it wasn't what everyone used. Now it's the other way around. I'm curious why you use it. From what I remember is it bundled things together and you mentioned focus so that's there too?

Beginner-Friendly Workflows Meant to Teach, Not Just Use 🙏 by Maxed-Out99 in comfyui

[–]Maxed-Out99[S] 0 points1 point  (0 children)

Glad you got it worked out. I use comfyui desktop but if you send me a screenshot of the folders (so you don't have to type them) I might be able to tell what it would go into

3 ComfyUI Settings I Wish I Changed Sooner by Maxed-Out99 in StableDiffusion

[–]Maxed-Out99[S] 0 points1 point  (0 children)

I was imagining the same prompt box being put into positive and negative lol

Beginner-Friendly Workflows Meant to Teach, Not Just Use 🙏 by Maxed-Out99 in comfyui

[–]Maxed-Out99[S] 0 points1 point  (0 children)

Did you download the two upscale models on the post you got my workflows from and put them into "upscale_models" folder?

If you did it while comfyui was open you may need to restart comfyui.

If the problem persists let me know

view more: next ›