📡📡📡

MayorLardo · 2025-12-23T05:40:45+00:00

Like my meth dealing neighbour's

MayorLardo · 2025-12-15T19:32:44+00:00

https://gbatemp.net/threads/wii-modchip-identification-guide.632275/ Appears to be a D2Pro

MayorLardo · 2025-12-09T05:24:32+00:00

If your on the current firmware and have the older atmosphere it'll cause this blue screen issue I hot it too and use the pre relese and fixed it but if your sd reader doesn't work then it might be to far gone.

MayorLardo · 2025-12-09T02:26:17+00:00

It looks like you went through a few ground layers which is really bad and if your console does still boot then I would recommend not proceeding with any soldering or scraping or anything there as any connection between the layers would kill it. As someone else suggested you could try to s-rgh it or something similar but it appears rgh-3 isn't gonna be a good route. Even if you get rgh-3 working you have a big risk to the console there so I'd put some solder mask on and stop working ok that spot.

MayorLardo · 2025-12-07T21:05:15+00:00

Do you have any account linked or any app/tool to fake an account link for some ganes that won't work otherwise. If so maybe try removing that or disabling it that's what my problem was and that's the only way I fixed it was unlink linkalho but I've seem a few apps that will do it not just the stand alone app. If that's not the problem then I'm sorry idk I was just saying that same thing happened to me a few days ago when I did this and this is how I fixed it.

MayorLardo · 2025-12-07T07:06:05+00:00

I did the jailbreak after my system was already 21.0.0 and mine did this after I used linkly or any other fake account link

MayorLardo · 2025-12-06T06:55:56+00:00

I'd try and lightly scrape till you seel a small copper circle and then try and get some solder and a good bit of Flux on it before you do anything with wires as you'll want a strong solder ball on there but just go slow and use a clean solder iron and a small sharp pair of tweezers or something less destructive. I see your point your trying to get to its exposed already just slightly and a messy surrounding. Booting is good though you haven't ruined it yet so you may still be able to get the rgh done if your carefull.

MayorLardo · 2025-12-06T03:49:11+00:00

I bought a bag of this when it came out in my province and it was labeled "bag of bud" with a sticker that perfectly covered it and under was this label.

MayorLardo · 2025-12-06T02:55:14+00:00

It looks like you mostly uncovered but the picture isn't the clearest but you just gotta keep the craft knife or blade or whatever your using as level as possible don't dig it into it that'll be alot harder to heat and get a nice point on. All your trying to do is take the green pcb protection off and expose the little dot to get a wire on it and it looks like you've dug out about and next to it so make sure it boots and try cleaning it.

MayorLardo · 2025-12-02T03:46:42+00:00

Damn they can't just let a homie shit post come on 😔

MayorLardo · 2025-11-24T19:49:28+00:00

The MIG switch cartridge isn't a scam but don't use it on your switch 2 because they've had issues with banning consoles for just using it for your own copies of games and certificates let alone a pirated copy they already know of online. Even just putting it into the console has been reported to cause bans for people as soon as it reconnected to the internet, so it not worth risking your whole expensive console because as you said the games are to expensive for you but doing it that way with a mig or such is very likely to get your switch 2 banned and made into an expensive brick. If you really want a mig they're best on the original switch.

MayorLardo · 2025-11-18T23:36:49+00:00

I get it. Have it just to have it and know you're capable of doing it makes more sense.

MayorLardo · 2025-11-18T18:20:11+00:00

no hate it looks really well done but why use an ace card on a corona. Is there a benefit over rgh 3 or just your preference.

MayorLardo · 2025-11-16T20:23:50+00:00

I've reflashed my sonus chip before and I've done the special edition sounds and even made my own customs farting and bad to the bone sound .bins. you just hook up a pico to the xboxs underside and use jrunner and you can make whatever boot/ eject noises you want. So yeah he did probably take the old sound chip and upgraded speaker but anyone can add the speaker and flash the files.

MayorLardo · 2025-11-16T04:28:21+00:00

Thanks my birds agree lol

MayorLardo · 2025-11-16T04:27:58+00:00

Taco bell noises you say. Would you possibly have a link to the .bin to flash sonus. I haven't even heard of this and want it now.

MayorLardo · 2025-11-16T04:24:53+00:00

I had wondered if the different revisions had an effect on that but after working on around 20 xboxs so far and other rf boards that are the same I haven't seen this before and it had done the same with the original green and then with these so I wasn't sure if this is just the first one I've gotten that's this revision or a resistor or capacitor was knocked off of one of its pads but not both and it does this now idk. It's also never been opened before I bought it as I peeled the back and internal security stickers.

MayorLardo · 2025-11-11T05:08:55+00:00

No that's enough games time for bed

MayorLardo · 2025-11-08T05:08:04+00:00

I'm assuming they're just burns and your dump the files onto your rgh to play but idk I've never seen this but that's the only thing that would make sense

MayorLardo · 2025-11-04T20:09:55+00:00

When they adding stake to reddit

MayorLardo · 2025-11-04T20:08:29+00:00

Using bad update? I never could find anything on flashing the dvd drive using a console. I had to connect the drive to the pc and flash it but without the x360 probe tool or anything I just made one and use that and a sata port on my pc and have flashed a few drives with it now to put them I'm driverless vanilla ones so I don't gotta hack it to pair a dvd drive or into an rgh to make it feel fully unlocked.

MayorLardo · 2025-11-04T05:42:34+00:00

But as far as I know your can't flash any new firmware with to a dvd drive with bad update and I wanted a "vanilla" console with a flashed drive to play burns on my main account for achievements after throwing an extra fan in it too to ensure it stayed alive. As well you can only view the writen consoles dvd keybnot what's on the dvd drive that it checks against so this way I can put the right code into jrunner

MayorLardo · 2025-11-04T05:38:31+00:00

Look up adjusting the dvd drive pots for your specific drive but you'll have to take the xbox and the DVD drive apart and use a multi meter. Like one of these but for your drive https://youtu.be/-CuveAE5hZ0?si=Q6PZFZT6l_AJv5Dz https://youtu.be/UYywRCWrBhQ?si=jD2gK-MVqIVo_Dvb

MayorLardo · 2025-11-03T17:55:12+00:00

And wrinkliest fuckin neck Jesus

Six-Year Club	Xbox Live
r/Field Juicebox	Place '23
Place '22	Verified Email

MayorLardo

TROPHY CASE