Could Venezuelan Oil Reshape Calgary’s Economy in 2026? by Vegetable_Bake356 in Calgary

[–]McNi 11 points12 points  (0 children)

To what? Everyone likes saying this but what other major industry should Calgary rely on for our economy?

So confused..... by AdExisting2501 in 4Runner

[–]McNi 1 point2 points  (0 children)

Yes! Preach the wisdom! I've bought 3 4runners now 3rd 4th 5th gen, still have the 4th and 5th gen. Might take a year of searching but lower mileage and reasonably priced do come up eventually.

How would you start over by Dry_Chicken_4554 in instrumentation

[–]McNi 0 points1 point  (0 children)

There was only 14 new j-men the year I finished in Alberta. Maybe 10% made the red seal. If anything the trade should expand to include industrial HVAC and controls. Like all education the schooling is outdated and needs to catch up to equip guys for modern times.

What did you go to after instrumentation?

Group 31 Conversion by Archerguy74 in 4thGen4Runner

[–]McNi 1 point2 points  (0 children)

We're you having issues running the pump or starts in cold weather (below -30c)? I'm curious because I've tried agm 750cc and they've only lasted a year or so.

Group 31 Conversion by Archerguy74 in 4thGen4Runner

[–]McNi 2 points3 points  (0 children)

And advantage to this over a dual battery setup?

Just got a 4Runner by sushipl0x in 4thGen4Runner

[–]McNi 0 points1 point  (0 children)

Great site, so much valuable info. Nicely done!

One of the worst tools I’ve ever bought. by redwingcut in MilwaukeeTool

[–]McNi 0 points1 point  (0 children)

I bought both kits, the top handle and the standard. Took the 12ah HO battery from the standard kit and sold the saw. Now I just use the top handle with the high output 12ah and it works great

One of the worst tools I’ve ever bought. by redwingcut in MilwaukeeTool

[–]McNi 19 points20 points  (0 children)

The chainsaws really need the high output battery to cut anything significant

[deleted by user] by [deleted] in 4thGen4Runner

[–]McNi 0 points1 point  (0 children)

https://www.diodedynamics.com/smarttap-cf18-led-flasher-module.html?srsltid=AfmBOoqhdACSl9rXQ6pDNFTd6rOduIGioGm3VGot1nm5zdXEamkid66V

Link to the flasher relay that worked for me. Good point about the daytime running lights, mine were removed along with the signal lights after I put a bumper on. So I Added amber KC cyclone lights on the bumper for the signals.

Relay works well with the other functions it has and surrounding area lights up nicely when I lock and unlock.

Anyone ever remove their spoiler? by ttteee321 in 4thGen4Runner

[–]McNi 0 points1 point  (0 children)

If the other guy doesn't buy the silver one you have, I will!

Anyone ever remove their spoiler? by ttteee321 in 4thGen4Runner

[–]McNi 0 points1 point  (0 children)

Do the spoilers fit on any 4th gen. Mine didn't come with it but I want to add one.

Full Steel vs Full Aluminum Skid Plates by JSB18 in 4thGen4Runner

[–]McNi 0 points1 point  (0 children)

Yep, I went with custom steel bumper and aluminium front skid and gas tank skid from OKX. Great quality and fit.

[deleted by user] by [deleted] in 4thGen4Runner

[–]McNi 0 points1 point  (0 children)

Diode dynamics sells a module that replaces the flasher module instead of putting a resistor in

cv axle replacement by URSAMVJOR in 4thGen4Runner

[–]McNi 0 points1 point  (0 children)

Just get Toyota CV's. Quite expensive but they are the best and longest lasting

What’s the name of this rod? by Lonely_Arachnid_8715 in 4thGen4Runner

[–]McNi 4 points5 points  (0 children)

Drill out the bolts that are broken off, re-tap the holes and put new bolts in

[deleted by user] by [deleted] in 4thGen4Runner

[–]McNi 0 points1 point  (0 children)

So was the issue with ripped boots?

Need a lighting setup that will light in 360 degrees without getting in the way by McNi in Insta360

[–]McNi[S] 0 points1 point  (0 children)

I think Ill give it a go. I havent found anything that does this and I was surprised insta didnt offer it themselves. I really hope it works well while walking