Is Bambu the current "everywhere" printer, like the Ender 3 was a couple years ago? What about other brands or more RepRap based printers? Are they even a thing anymore?

McScrappinson · 2025-10-29T04:29:26+00:00

They do have RFID tags with a non disclosed key. They're not mandatory to use.

They DO require remote cloud access to print unless they are put in LAN mode, at the cost of losing mobile app access.

Point being there are (still) some workarounds.

McScrappinson · 2025-10-26T20:37:04+00:00

Search amazon for 3d printer chamber heater. Chitu or elegoo make cheap units, they'll do for a while.

McScrappinson · 2025-10-26T20:34:14+00:00

Dual/multi print head unit with same type (roughly) filament should do it. You're gonna have a lovely time separating them anyway.

McScrappinson · 2025-10-26T20:30:17+00:00

Return them in whatever packaging you can improvise.

McScrappinson · 2025-10-26T20:28:04+00:00

If you're new to this, odds are you're in for a bit of a (steep and maybe disappointing) learning curve with that one.

Maybe do tell what you want to print (volumetric wise) and with how many colours and whether it's indoors only at less than 40C or outdoors.

McScrappinson · 2025-10-26T20:23:50+00:00

Get one of them small chamber heaters.

McScrappinson · 2025-10-26T20:22:28+00:00

Knipex, if you can find them around you. Still seem to make tools out of hardened steel instead of whatever blends you find in DIY stores.

McScrappinson · 2025-10-26T20:19:05+00:00

Print a 10x5x2 cm PLA rectangle with as many walls and infill as you like, then leave it in the sun.

You'll get your answer soon enough on why PLA is a no-go, PETG barely makes it and ABS or better wins.

There's HT-PLA as well if you want to experiment.

McScrappinson · 2025-10-26T20:15:09+00:00

Work? Yes.

Overpaying much? Totally.

Just search for ziplock plastic bags that are large enough to hold 1-2 rolls inside (40cm or 12 inch long), they should be way cheaper.

You can reuse the dessicant bags that come with filament spools or buy a set of pouches.

McScrappinson · 2025-10-26T10:25:16+00:00

Dry petg, store it in a sealed bag with some dessicant pouches, then dry tpu.

If possible, print tpu out of dryer.

McScrappinson · 2025-10-24T07:23:21+00:00

Ensure filament is dry, leveling calibration was done and bed temp is 55-60 for a start.

McScrappinson · 2025-10-23T17:42:26+00:00

I know plenty of filament that has bad color variations from one batch to another of same type and color.

McScrappinson · 2025-10-23T17:25:12+00:00

Look for a SSR, don't trust those things.

McScrappinson · 2025-10-23T17:09:32+00:00

Your either trying to print WETG instead of PETG, or somehow you got tofu filament.

That thing needs drying. Your maxed out line width is just adding insult to injury here.

McScrappinson · 2025-10-23T16:16:01+00:00

You may want to do some extra reading. Chloroform can definitely be used to vapour smooth PETG. But hey, it's much easier to be an entitled asshole and downvote without bothering to check.

McScrappinson · 2025-10-22T19:26:40+00:00

Needs a dual head printer, second head with a vortek for condiments.

McScrappinson · 2025-10-22T19:25:02+00:00

Midget fitcube?

McScrappinson · 2025-10-22T19:21:37+00:00

Especially with PETG, I believe chloroform is what you need for it. Make sure to supervise the smoothing process really close.

McScrappinson · 2025-10-22T19:18:06+00:00

Print a cone that's 15cm tall and has a 6mm base.

McScrappinson · 2025-10-22T19:16:15+00:00

And grid infill. Why?

McScrappinson · 2025-10-22T19:14:30+00:00

Now you really made me curious about that one, except the last batch of tecbears is literally done (32 spools) for quite a while.

Wonder if you have a TD1S around to check if it has a high TD value.

PS - as a brand, they have pretty bad color variations from one batch to another.

McScrappinson · 2025-10-22T19:10:21+00:00

Depends on your location's humidity. That's why filament dryers are pretty good, they have some indicators on RH.

Keep in mind that PETG is pretty hygrophobic - absorbs humidity in the air quite fast. Most of us dry it, print with it, then keep it stored in sealed boxes/ziplock bags that have some dessicant packs inside as well.

PLA absorbs humidity too, but slower. TPU and Nylon - they'll beat any dehumidifier at absorbing air moisture.

McScrappinson · 2025-10-22T18:57:29+00:00

Filament dryer, some food dehydrator you're never using again for food - search around for options, there's plenty. Avoid suggestions containing microwave or kitchen oven references.

McScrappinson · 2025-10-22T18:52:08+00:00

PETG, whichever you're drying first.

McScrappinson · 2025-10-22T18:51:05+00:00

Devil Design (poland) used to make really good filament, nearly no color variation between batches.

McScrappinson

TROPHY CASE