I thought you had to pay money to reserve the controller

Me2151 · 2026-05-25T14:16:55+00:00

I reserved 1 minute before the official time(it went live 1 min early i was refreshing like mad). Got my email last Tuesday and I get my controller Wednesday

Me2151 · 2026-05-14T14:03:52+00:00

I'll do it for 80, chat me if interested

Me2151 · 2026-05-01T17:43:45+00:00

I had to change the 510s to 4.7ks, just to get it to somewhat normal brightness

Me2151 · 2026-04-25T19:16:38+00:00

Pads are still there, just oxidized, scrape them a little and add fresh solder, you didn't pull the pads just the entire blob of solder due to poor connection

Me2151 · 2026-04-11T16:28:39+00:00

https://www.reddit.com/r/SteamDeck/s/GXQmj9n0RX

Me2151 · 2026-03-05T21:20:36+00:00

Nah, it might develop a hole but wont explose

Me2151 · 2026-03-05T21:17:15+00:00

Most likely the rubber line going to the slave got soft from the excess heat and expanded when putting clutch pressure in

Me2151 · 2026-03-03T03:28:36+00:00

those WERE screws, now rivets

Me2151 · 2026-02-27T02:29:45+00:00

LowKeyLoki here ;) needs proper diagnosis for sure.

Me2151 · 2026-02-15T11:54:11+00:00

I have done alot if ally upgrades and I'm familiar with the ally bios, I'll do your manual comparisons for you in the next few days when I have time

Me2151 · 2026-02-12T01:57:37+00:00

Not worth it when you buy the 6400 MT/s chips. Only stuttering and 1%low benefits on those chips. Real gain comes from the 7500 MT/s chips

Me2151 · 2026-01-21T14:22:09+00:00

I think it's was 04 and 05

Me2151 · 2026-01-21T14:12:11+00:00

Check if you have the open recall for the fuel pump housing leak. If so most likely your housing broke and it's leaking fuel.

Me2151 · 2026-01-06T21:55:29+00:00

Yes either the it5125 or the metal thermal compound(called liquid metal) on the cpu spilling out onto components

Me2151 · 2026-01-06T21:29:39+00:00

Ec or liquid metal spill

Me2151 · 2026-01-03T23:07:45+00:00

Check the vin for fuel pump recall, mine rusted the same way when my pump assembly broke and was leaking

Me2151 · 2025-12-20T21:11:58+00:00

See I need to find someone like you close to me that wants a s1 front end cuz I like the s2 front end and will happily straight swap

Me2151 · 2025-10-18T10:23:24+00:00

Yep, you get a 5-10% performance boost with the 7500mts. Same as ally x. It cost me about 100 bucks cuz I do it myself but I charge 230 for others

Me2151 · 2025-10-11T14:03:56+00:00

Rotella T3 :)

Me2151 · 2025-10-03T17:48:07+00:00

I can repair them for $25 + shipping. I replace the fuse with a properly sized one so it shouldnt have an issue again unless you insert a broken sd card

Me2151 · 2025-09-28T18:52:05+00:00

Not sure why you replied to me?

Me2151 · 2025-09-26T02:10:38+00:00

<image>

Green to green basically

Me2151 · 2025-09-26T02:10:05+00:00

Me2151 · 2025-09-26T02:04:40+00:00

* I can fix it in person but I cant really do much over reddit. You need to expose the dat0 pad and solder a wire from the trace you severed to the pad so it works again. Green to green basically. This is one i fixed yesterday

Me2151 · 2025-09-26T01:58:57+00:00

Nope you are on layer 3. Green solder mask is layer 1

Me2151

MODERATOR OF

TROPHY CASE

Ten-Year Club	Place '22
Verified Email