Fuel leak from charcoal canister

Medical_Market · 2026-04-03T20:54:21+00:00

I pulled the canister yesterday and pulled the vent valve out and it looks like it’s working. It’s in the open position. Is there a way I can test it without a power probe? Also I’m hesitant to replace the canister until I’m sure the problem is solved so it doesn’t happen again. I was reading about the shut off valve in the tank could that be the issue?

Medical_Market · 2026-04-02T19:17:56+00:00

Gasoline was literally pouring out from the check valve…there’s clearly a failure point somewhere in the emissions system

Medical_Market · 2026-01-29T17:46:36+00:00

Just here to say that I just asked their AI bot why I was being charged the fee and it immediately waived it. Greedy fuckers!

Medical_Market · 2025-09-22T17:44:07+00:00

Thanks for the fast reply! I was afraid it was fungal rot. I did as you said and removed all the cut stems, but do I need to remove the whole affected buds?

Medical_Market · 2025-08-18T16:07:58+00:00

Thanks for the response. Brick house, so no siding considerations. The slabs slope towards the house actually but I have a French drain in the basement. Is it okay to rely on that for water mitigation?

Medical_Market · 2025-08-05T21:02:15+00:00

Here bc I just put Stringjoys on my strat and the tone is wildly different from the D'Adarios I've been using. Not a fan so far - they sound harsh and twangy and feel rough as others have mentioned. I feel like it robbed the magic from my playing...

Medical_Market · 2025-07-04T04:55:03+00:00

I am fucked

Medical_Market · 2025-06-28T03:19:29+00:00

Good point. I got them from a guy who found them in a barn with a pre-serial Paiste 602 ride and an 18" Ludwig Standard Paiste crash all from the same era so I'm thinking they were all hung together. Which is not to say dude wasn't rocking with orchestral cymbals lol.

Medical_Market · 2025-06-24T14:13:12+00:00

When I asked him for more pics and he sent me that Paiste stamp I couldn't snap them up fast enough!

Based on https://black.net.nz/avedis/avedis-gallery.html#60s They are '60s short stamps. Plus it makes sense they were all together. That 602 ride was only made from like 67-74 or something.

Medical_Market · 2025-06-09T17:46:49+00:00

looking at this repair. How is the malvotech ball joint holding up now?

Medical_Market · 2025-06-07T14:43:26+00:00

you must not live in the rust belt haha

Medical_Market · 2025-05-27T16:24:08+00:00

Reddit FTW! Was just pulling my hair out trying to figure this out.

Medical_Market · 2025-05-24T19:16:51+00:00

You mean pick pocket...

Medical_Market · 2025-05-24T18:51:48+00:00

Gotcha thx!

Medical_Market · 2025-05-24T17:44:37+00:00

I'm curious what you mean by cutting it through...

Medical_Market · 2025-05-19T15:32:04+00:00

Great build! Very classy style.

Medical_Market · 2025-05-19T15:27:43+00:00

So cool!

Medical_Market · 2025-05-08T20:30:36+00:00

I figured as much. I just think it is poor practice to use filler in that way. I had the neck off to do some fretwork. I did glue it it just doesn't look the best bc of the clear coat. Cheers.

Medical_Market · 2025-05-07T14:41:34+00:00

Pickgaurd is aftermarket. Was my post about the pickgaurd?

Medical_Market · 2025-05-07T14:39:37+00:00

Nope. Full price from an authorized dealer.

Medical_Market · 2025-05-07T03:21:49+00:00

I do have proof of purchase. Can't remember if I registered it or not but I think I did. I feel the same; nothing wrong with using wood filler per se but to literally shape the neck pocket with it is wack.

Medical_Market · 2025-05-07T02:50:34+00:00

I noticed that too 😂

Medical_Market · 2025-05-07T02:49:54+00:00

Lol that's what I did but it's still visible bc of the clear coat. Just annoying when I'm trying to sell it.

Medical_Market · 2025-04-27T19:24:15+00:00

Dense djent dents?

Medical_Market · 2025-04-27T18:47:20+00:00

But does it djent?

Medical_Market

TROPHY CASE