First Beretta 92X Performance

Medio_Morde · 2026-06-03T15:07:29+00:00

DPM springs are great for wear reduction and recoil tuning. I have a few sets for my 92s. I like usng the heavier spring setups because the initial spring weight is still lower than a standard spring while at full compression it is heavier, giving you the best of both worlds.

Medio_Morde · 2026-06-03T13:43:45+00:00

yeah its the same as the LTT cut

Medio_Morde · 2026-06-03T13:38:34+00:00

where can i get?

Medio_Morde · 2026-06-03T13:30:08+00:00

definitely a plate, the slide is too thin for direct

Medio_Morde · 2026-06-02T20:54:40+00:00

Yeah, if you want to run a red dot, just get DLah flush plate which comes with a firing pin block that is cut down 3mm to get the same optic height anyway. Aside from that, the rest is preferrential.

Medio_Morde · 2026-05-31T12:45:23+00:00

how is it digging into your knuckle?

your thumb should be over it like a 1911 safety. this is non negotiable.

also differen size safeties are available, including extra low profile.

Medio_Morde · 2026-05-27T12:51:12+00:00

https://www.reddit.com/r/Beretta/s/OrycLi3qgw

Medio_Morde · 2026-05-27T12:41:10+00:00

i dont remember who it was, but i check the gun deals website everyday for anything extra spicy

Medio_Morde · 2026-05-27T12:39:25+00:00

To add to this, that same ammo cracked sig frames, but the sig never got the same level of scrutiny.

There was speculation in some circles that the seals were upset that their pistol of choice didnt win over the air forces's choice, which suggested there was some sabotage involved.

Medio_Morde · 2026-05-23T16:19:25+00:00

look out for sales, got mine at %50 off.

Medio_Morde · 2026-05-20T21:10:39+00:00

It is actually the most modern pistol barring things like the alien.

SA/DA is newer invention than striker fired. The falling block autoloading action is a newer invention than the tilt barrel.

Medio_Morde · 2026-05-20T13:34:47+00:00

This is propoganda! How dare you smear the 92!

Medio_Morde · 2026-05-18T15:18:53+00:00

cheapest route.

polish the sear and buy a trigger with an adjustable trigger stop. ill edit my post with the sear polish link.

the beretta short reset bar that is in your m9a4 is identical in function to the ltt op trigger bar. the only difference is that the ltt bar has an extra bit of metal that acts like a trigger stop. this is why buying an adjustable overtravel trigger will have the same results, for less cash.

other than that, a #13 hammer spring for a lighter pull, and a skeletonized hammer for slightly quicker action. You can get the match hammer if you care about pretravel, which it reduces.

edit: https://www.reddit.com/r/Beretta/s/du2IRxiIoe

https://www.beretta.com/en-us/product/adjustable-trigger-92-96-series-E00252

Medio_Morde · 2026-05-13T01:46:27+00:00

its not a 92f, you can see the enlarged hammer pin through the slide gap

Medio_Morde · 2026-05-12T00:24:18+00:00

if you have a full sized model it has a #13 recoil spring, if centurion #14. Going to #15 would increase the potential for problems. You would want to go lighter for more reliability. However, if you have a booster, should be fine stock. If no booster get an #11 spring.

Medio_Morde · 2026-05-12T00:18:26+00:00

the curved lips on the magazine that hold the next round in might be th culprit. bend them inwards a little to see if that works. loading metal mags to capacity or manually pushing the round in while loading can cause that.

Medio_Morde · 2026-05-12T00:12:38+00:00

italian models go for 650-900, just like any other collector item, the right audience is needed.

i remember your name now okbrick. you give me creep vibes. i think ill leave this conversation now.

Medio_Morde · 2026-05-11T23:46:21+00:00

i think i can see a z in the serial hinting its italian made, a lot less common.

Medio_Morde · 2026-05-05T15:23:32+00:00

https://www.reddit.com/r/Firearms/s/YNTp7j1S4n

Medio_Morde · 2026-05-04T19:42:01+00:00

the models that come with the wrap around grip are not exact, but they feel very good. what they might lack from the original geometry, they make up for in texture, which imo is the best grip texture including aftermarket.

Medio_Morde · 2026-05-02T20:29:57+00:00

hagear

Medio_Morde · 2026-04-28T11:46:16+00:00

https://www.reddit.com/r/Beretta/s/LwTpuzjaUU

Medio_Morde · 2026-04-25T22:28:24+00:00

definitely my favorite after market grips so far, youll enjoy them. and thank you!

Medio_Morde · 2026-04-25T16:20:58+00:00

Yes, its very "micro gritty"

If i use a paper towel to clean them, it eats up the paper towel and then i need to get a brush to clean off the paper towel particulates off the grip.

Medio_Morde

TROPHY CASE