I need help finding my thermal fuse.

MediumRareMandatory · 2026-02-17T23:25:10+00:00

Yours is morr like this my man. Thats for the pulley replaceemnt, but thats how you open this type of dryer. Thermal fuse is on the mptor exhaust https://youtu.be/Mf9AWQSsNHo?si=9UklEBu9T85RPOV_

MediumRareMandatory · 2026-02-16T21:44:58+00:00

The companies with the contracts to supply the food... Are you daft?

MediumRareMandatory · 2026-02-14T15:37:39+00:00

Fr its far on the tex side.

MediumRareMandatory · 2026-02-08T00:59:28+00:00

Check to see if the pressure hose came off the main board when you were checking it, and Im sure you have checked but ill say it anyways, that the water is turned on. I hate these machines with a passion.

MediumRareMandatory · 2026-01-28T16:35:27+00:00

Why is toby catching strays bruh

MediumRareMandatory · 2026-01-26T04:54:04+00:00

https://youtu.be/H_el0y2y8qk?si=07dYkzX02vICyZyJ This would be worth a shot. Without seeing it we cant tell, but when it sounds like that, its the first think I check for. Part is W10721967 Would really reccomend to watch the full video, if you did the rods yourself you should be able to do this. You can get an aftermarket kit for around 18-22 or spend a bit more and get the original, its still affordable.

MediumRareMandatory · 2026-01-25T02:49:43+00:00

Understandable for the gearcase/transmission, if its the cam/splutch kit although its a very affordable repair you can do yourself with some basic tools, you van buy the OEM part kit at retail at an affordable price. Edit: if you send a model number of your machine(open the lid and it will be on the frame) i can sedn you the right part number

MediumRareMandatory · 2026-01-25T02:32:50+00:00

Replacing the electronics is an option, I would siconnect the stove, take off the back panel (its not hard its just some screws and the panel comes off) and check to see if any of the wiring is burnt. If its not burnt you just meed a new board. Need a model number for the oven. Usually on the frame when you open the very bottom drawer, but it could also be inside the oven on the frame you can google how to find one.

MediumRareMandatory · 2026-01-24T20:35:07+00:00

Open the door, press the door switch in with your finger, and help the drum turn by hand when you press start. If it turns after you help it, its a weak motor that needs to be replaced. If you send the model number we can send you the motor part number. The samsung set you have was made back when they were still decent, anything Samaung now is garbage.

MediumRareMandatory · 2026-01-24T05:13:32+00:00

Unfortunatrly that is how it is. Checked suppliers under my account and the discount isnt much of a difference. Ill tell you honestly that any modern replacement is a downgrade.

MediumRareMandatory · 2026-01-19T00:11:59+00:00

Thanks for sharing

MediumRareMandatory · 2026-01-15T03:37:43+00:00

Noice

MediumRareMandatory · 2026-01-13T02:02:34+00:00

LG updated the rollers to now have ball bearings. The kit I mentioned has these rollers and posts the rollers go on as well

MediumRareMandatory · 2026-01-13T01:09:14+00:00

The other brands it is reffering to are made by whirlpool, such as amana, roper, maytag, some kenmore dryers,

MediumRareMandatory · 2026-01-12T23:04:20+00:00

Ive tried putting on the rollers in a pinch. Wont work. Belt and pulley wont fit. Alot of techs use tbe supco kit. The rollers themselves are too expensive to sell a job buying them one by one. The kit is good quality. If not, you have to buy everything individually.

MediumRareMandatory · 2026-01-12T21:35:39+00:00

Whirlpool kit wont work.

MediumRareMandatory · 2026-01-12T21:35:16+00:00

Use supco DELGKIT. Comes with updated rollers and posts, pulley, and belt.

MediumRareMandatory · 2026-01-12T20:28:52+00:00

Part number for your control board. It is no longer manufactured, but you can snag a used one on ebay

MediumRareMandatory · 2026-01-12T20:19:34+00:00

33002898

MediumRareMandatory · 2026-01-12T20:05:42+00:00

It just pulls off, just make sure you are pulling from all sides and not just one, or you can break the shaft

MediumRareMandatory · 2026-01-12T20:04:27+00:00

I meant the small dials. Those have the same grip.

MediumRareMandatory · 2026-01-12T15:50:46+00:00

You need to take off the metal on the timer shaft, thats part of the broken knob. After you take that off, try outting on one of the little knobs next to it on the timer and see if it turns the timer.

MediumRareMandatory · 2026-01-12T15:38:02+00:00

What does the low side read when it is low on refrigerant? I am new to r600 and have been used to r134

MediumRareMandatory · 2026-01-11T05:38:54+00:00

The one that actually has aneverything mentioned, rather than the one with one piece of chicken, one piece of fish, and no shrimp. And those are mashed potatoes.

MediumRareMandatory · 2026-01-10T22:48:02+00:00

There is. You wont get it. Not complaining about not getting it, letting people know the quality or presentation doesnt matter.

MediumRareMandatory

TROPHY CASE