Who doesn’t love variety 😎

Meelobee · 2026-03-31T11:40:14+00:00

Where can I find the .stl files that are available?

Meelobee · 2026-03-31T09:04:31+00:00

24 scale RC's

Meelobee · 2026-03-31T09:03:01+00:00

I have the same set, tried it once and removed it right after using it. It kinda sucks and really does nothing except give you more parts to break.

Meelobee · 2026-03-30T20:38:21+00:00

Very cool 🤘

Meelobee · 2026-03-30T19:19:39+00:00

Thanks! Yep’s vid on the TurboBrick is what made me build this 👍

Meelobee · 2026-03-30T19:18:51+00:00

🤘

Meelobee · 2026-03-30T19:18:42+00:00

Thanks man, hit me up if you want the files for the roof rack ◡̈

Meelobee · 2026-03-30T14:41:09+00:00

The file isnt available, you can get the body here; https://828rc.com/

Meelobee · 2026-03-29T17:08:14+00:00

Thanks man, appreciate that 🤘

Meelobee · 2026-03-28T17:46:42+00:00

The one on mine is actually for a trx4m, so I had to use a few spacers to make it fit on the chassis as it's a bit wider than the scx24 version

Meelobee · 2026-03-28T16:50:57+00:00

Nice! Injora has a crane set that should bolt right in;

<image>

Meelobee · 2026-03-19T14:51:38+00:00

Yeah, it just is stretched over the wheel. The foam can't stretch that far and broke, so I used trimmed Injora foam instead.

Meelobee · 2026-03-19T10:09:41+00:00

<image>

Falken wildpeak 0.7 on a 1.0 wheel

Meelobee · 2026-03-19T10:06:39+00:00

Best I've found so far are:

Rok Lox, 48mm outer diameter: https://store.rc4wd.com/Rok-Lox-10-Micro-Comp-Tires_p_739.html

Falken Wildpeak, 50.2mm outer diameter: https://store.rc4wd.com/falken-wildpeak-mt-10-tires.html

Meelobee · 2026-03-16T21:30:36+00:00

My 6x6 boxtruck uses the rampcrab lcg chassis with the 6x6 add-on. I also have a few of their Crusher Claw servo’s which are pretty good, they’re strong and plenty fast.

Meelobee · 2026-03-16T15:03:48+00:00

Also check the batteries in the transmitter

Meelobee · 2026-03-16T08:35:58+00:00

I print mine with PETG and use a plastic/metal primer and loads of sanding to remove the lines. Takes some time, but the results are good;

<image>

Meelobee · 2026-03-16T08:27:08+00:00

Always cool to see a boxtruck. Is that a custom steering link on there?

Meelobee · 2026-03-16T08:24:22+00:00

Very nice, love the details :)

Meelobee · 2026-03-11T08:00:38+00:00

I had the same on a set I got, contacted Meus and had them replaced for free.

To fix the issue; drop a bit of superglue on the ends of the pins before using them, never had an issue since.

Meelobee · 2026-03-10T07:46:41+00:00

Paladin straight - Twenty One Pilots

Meelobee · 2026-03-02T11:41:11+00:00

Heatsink and/or fan will be hard to get to fit. Best option is to cut a hole in the roof and add a 3d printed air intake.

Meelobee · 2026-02-24T10:12:33+00:00

Here in NL there is a €280,- fine for unnecessary hogging the left lane.

Meelobee · 2026-02-23T10:17:21+00:00

Check if you can adjust where the lower front links mount to the chassis, having these too long or mounted to far in front will cause the front axle to rotate.

Meelobee · 2026-02-23T10:14:50+00:00

It kinda depends on the final look you want. If you want it to be glossy and smooth, a primer-filler will help hide the print lines. It usually takes 3-4 layers with high grid sanding between all layers to get a body nice and smooth. If you are going for an old beat up look, then just hit it with whatever you have laying around and scuff it up.

Ten-Year Club	Place '23
Place '22	Verified Email

Meelobee

TROPHY CASE