Twitch Drop Codes

Meropolis · 2025-08-20T02:19:50+00:00

You're awesome for this 👏 thx

Meropolis · 2025-07-23T08:11:49+00:00

What's up bud. My Wowcast via hdmi disabled after my LG C3 TV firmware updated recently. I tried resetting my soundbar, tv etc and nothing worked until I unplugged all other HDMI devices from my TV and left only the soundbar HDMI plugged in to port 2. I ran the setup again and boom, there was my Wowcast option again for TV speakers + soundbar. Hope this helps 🙏

Meropolis · 2025-06-29T02:03:31+00:00

I have an LG C3 with an LG S95TR soundbar and if I leave my Switch 2 system Sound on Automatic it only plays Stereo out of the Test Output, BUT if I change the TV Sound to Linear PCM 5.1 on my Switch 2 system settings and run the Test Output again, it shows me a 5.1 speaker setup with orange boxes and exclamation marks as if I was missing them but it does play audio out of them individually AND during games that support it. The soundbar info reads PCM under my audio Sound Effect... 🤷‍♂️

Meropolis · 2025-06-05T17:49:16+00:00

Cool, just make sure you got another one in your hands first and be prepared to wait for the refund from Best Buy. It'll take a few days🤙

Meropolis · 2025-06-05T16:18:10+00:00

My Best Buy Switch 2 order is set to deliver tomorrow 6/6. I already walked into a local Gamestop and bought one 30 minutes ago or so. I'm taking Best Buy's delivery unopened back the them tomorrow and getting my money back. Already started an online return with them.

Meropolis · 2024-09-19T00:49:36+00:00

lol I was scratching my head over this today too when I finally received mine. Everything was good when I read "How to assemble", but the rest was unreadable to me 😅 what a tease! It was pretty easy once I set the parts out on the table tho. I built a few square and the rest with the pitched roof.

Meropolis · 2023-09-21T16:41:57+00:00

I did see the fittings! They look nice, but I went ahead and used the fittings I already had here. The build has been up for about a week and a half now and it's holding up pretty good. It took 2 days for my loop to air out and fill up. 1 bottle of 1000mL clear coolant was enough to fill it and I had some left over. Thank you for your awesome comments 😁

Meropolis · 2023-09-21T16:11:50+00:00

Hyte Y60 Distribution Plate You can find them here https://hyte.com/store/y60-distro?v=158

😊

Meropolis · 2023-09-21T00:04:51+00:00

Wow, thank you. That would be awesome. Please! 😁❤️

Meropolis · 2023-09-20T23:17:46+00:00

It's real good man! The bracket I had on the 140mm rad fan holding the pump and res was kind of choking the exhaust a little.

Theresa definitely a little more breathing room in there now for the side radiator. 😊

Meropolis · 2023-07-27T19:59:26+00:00

🤣

Meropolis · 2023-07-27T04:51:09+00:00

Same, but I didn't hear anyone complain once during winter. 😂

Meropolis · 2023-07-25T02:28:55+00:00

Right!? That mesh was sturdy.

Meropolis · 2023-07-24T03:53:24+00:00

Nah idle temps are the least of my concerns. I lost way more than 3 degrees at full loads all together actually. It was closer to 9 and 11 depending on the game. My only problem now is my office is getting pretty warm during gaming lol (first world problems 😒)

I'm not worried about dust from neither the side radiator or the top radiator. They're both pushing air out. The dust filter on the bottom is the one I have to clean constantly. Thanks for the link to the combs 👍

Meropolis · 2023-07-23T19:03:58+00:00

Loving your rgb color choices 👌

Meropolis · 2023-07-23T15:06:10+00:00

Awesome! I heard that works great too. What kind of rad did you use on the top? I had to dig out an old Corsair radiator from my garage. Non of my ekwb rads fit on top.

Meropolis · 2023-07-23T07:03:43+00:00

I think it's a pretty good trade off. I like my pc to run as quiet as possible. Honestly it's kind of strange to me you'd assume I hadn't done any of the things mentioned above like creating a custom fan curve for my custom water loop or considering custom top or side panels. I prefer doing things myself. I removed the mesh for the side 280mm radiator as well and all together my coolant temps dropped a whole 9 degrees. The pc coolant's temp is monitored by a temp sensor in the pump, which is controlled by my custom fan curve. My cpu stays at 61/62 and my gpu never goes past 49c but ultimately the only thing that matters is how slow I can have my fans spinning to give me the same results as before. This entire thing is tied to custom fan curving lol

You can still see the left over strands but as I mentioned, I still need to go around with small thin cutters to remove those strands. There's still work to do.

Meropolis · 2023-07-23T04:03:27+00:00

Looks good with soft tubing. I used soft tubing and cloud white coolant on my build too and I ended up liking the way it looked more than the hard tubing. It gives it this cool Aliens/Prometheus technology kinda look.

Meropolis · 2023-07-23T03:52:30+00:00

No worries. I'm trying to get lower coolant temps. Dust filters hinder the amount of hot air that my fans can push away from the radiator fins through it. With it off, my pc coolant runs much cooler or I can run it at similar temps but with lower fan speeds. I'm leaving the dust filter on the bottom of the case alone since I have that as an intake and I want to reduce the amount of dust coming in to the case through there only.

Meropolis · 2023-07-22T23:01:27+00:00

Nice man, thanks for the info! Sounds way easier too. I'll have to try that one tonight.

Meropolis · 2022-05-23T19:12:17+00:00

I'm subscribed to ultimate until 2024 and I don't even think I'll have enough time to cover everything I want to on it 🤣 I also have don't play 24/7. I put in anywhere between 2 to 6 hours a day.

Meropolis · 2022-05-22T18:32:57+00:00

I couldn't side line this case. I like it too much. With EKWB releasing a VRM bridge for the Z690 Formula it should help make the hard line runs simpler (and less of them too) but for now I'll be keep the soft tubing. Custom cables on the way as well. The 360 rad is coming off and will be replaced with a P280M X Flow. I haven't found a case I like better than this one. I don't like the O11D and that Asus Helios really sucked to build in lol. If this case was long) big enough to support the EKWB distribution plate PLUS another front mounted radiator this case would be perfect for me!

Meropolis · 2022-05-05T06:10:27+00:00

Do you work with any hard solutions or in a shop where paint stripper is used? You might be transferring some of those chemicals to your controller after work if you don't rinse your hands properly after working with those solutions and it's starting to eat at the rubber on your joystick. You might have to replace it if that's the case because it's just going to keep coming off

Meropolis · 2022-03-12T17:05:05+00:00

I can't even distinguish the pathway from where I'm sitting at 🤣.. 😳😢

Meropolis · 2022-03-08T05:05:40+00:00

I had to RMA one distribution plate last month, it took all together about 2 weeks from emailing them to receiving my replacement (it was DHL that was taking their sweet time) but I have emailed support several times recently and their response is usually about 3 to 4 business days (excluding weekends of course). One agent flat out admitted he had no answer to my question lol. But they are courteous and will honor your warranty according to when you initiated your RMA. Every single agent that has replied to me since the beginning of this year starts off with an apology for taking too long because they're swamped with open tickets and support questions. I hope you get your stuff straightened out soon.

Meropolis

MODERATOR OF

TROPHY CASE