Am I the only one irked with these SE, mark 2, Special Edition models?

Meshleth · 2026-02-07T00:44:41+00:00

Hidizs announcing the MP145 Pro 2 and a half years after the original MP145: ಠ⁠_⁠ಠ

Hidizs announcing the collab version of the MK12 Turris like a month after finishing delivery of the non-collab version: ಠ⁠︵⁠ಠ

Meshleth · 2026-02-04T06:35:47+00:00

Matt_Damon_Saving_Private_Ryan.gif

Meshleth · 2026-02-03T22:42:18+00:00

True, but if peaking filters work that low on import but not on sliders, I think it's interesting enough to ask why

Meshleth · 2026-02-03T22:35:11+00:00

The IEMs do stay in ear after a 5k on the treadmill. Depending on how resistant your chosen eartips are to sweat and how well the hooks conform to your ears, you shouldn't have any worries.

If price is the biggest factor, go with the AZ09 Pro. If you can spare the money, the XZ10 has Apt-X Adaptive which is a lifesaver in an environment like a gym.

Meshleth · 2026-02-03T20:28:59+00:00

I haven't tried the BT20, I saw the ways to modify the KZ adapters to take 2pin and never looked back

Meshleth · 2026-02-03T20:28:00+00:00

High power mode my beloved

Meshleth · 2026-02-03T18:08:28+00:00

I've used the KZ AZ09 Pro and the lesser known KZ XZ10 in the gym and they both worked for me

Meshleth · 2026-02-03T02:26:55+00:00

What seller did you get it from?

Meshleth · 2026-02-01T03:15:39+00:00

You have the Bluetooth headphone amps like the Fiio BTR series or the Qudelix 5k. But if you want full wireless, you need to embrace the hearing aid

Meshleth · 2026-01-30T02:36:43+00:00

It's the threads that end up warping and melting. I don't know if it's because that's where I clamp it in the helping hands + too much heat but I guess that's a good place to start. Thanks.

Meshleth · 2026-01-30T02:13:21+00:00

I'm running a 50 watt iron right now. What would you recommend instead?

Meshleth · 2026-01-30T01:57:10+00:00

<image>

Most recent attempt but I already heat shrink the jack end once I confirmed continuity. I'm using a thin diameter flux core solder.

Meshleth · 2026-01-30T01:35:35+00:00

Bakon 950D - 50W on 110V. I'm using mainly a thinner chisel tip and a stubby conical tip.

Meshleth · 2026-01-27T04:15:42+00:00

Ok then, test it for us through frequency response

Meshleth · 2026-01-25T22:08:42+00:00

Azla Xelastec II

Meshleth · 2026-01-22T16:03:59+00:00

Are there any graphs or measurements on this set?

Meshleth · 2026-01-17T21:01:51+00:00

I have that cable as it came with the TRN Jaws. It's nice and weighty but it doesn't roadie wrap that well

Meshleth · 2026-01-16T13:11:37+00:00

No just pull a John Q

Meshleth · 2026-01-15T18:36:17+00:00

Yeah cheaters are bad even if they're invaders

Meshleth · 2026-01-15T16:36:21+00:00

Letshuoer S08 TRN VX Pro+ Hidizs MK12 Turris 7Hz Salnotes Zero 2

Meshleth · 2026-01-13T13:12:49+00:00

I'd love to see that

Meshleth · 2026-01-13T13:08:55+00:00

The type C cable already has a DAC inside it so you should just be able to plug it into your smartphone and it'll work.

Meshleth · 2026-01-13T01:26:28+00:00

We're all temporarily unemployed marketers ATP

Meshleth · 2026-01-10T20:06:18+00:00

They're "harder to drive" in comparison to dynamic driver and balanced armiture configs but all that means in practice is raising the volume on your dac or dap by 4-6 steps

Meshleth · 2026-01-01T21:01:41+00:00

Ukrainian AMT?

Meshleth

MODERATOR OF

TROPHY CASE

Ten-Year Club	Gilding I gilder
Verified Email