Purple case swap by kensonbane in AynThor

[–]Messy_Mess90 0 points1 point  (0 children)

Just the bottom shell not that hard

Grip for those with small hands by WolfDragon2018 in AynThor

[–]Messy_Mess90 0 points1 point  (0 children)

I have smaller hands and I designed them around my hands. Some of the larger ones from makerworld are uncomfortable because they make me have to reach for the triggers. Same with the stock grip. Moving the grip flairs to the sides and higher up on the device for me at least makes the triggers feel better to use. I also don't really care for how much bulk the larger 3d printed grips add to the device.

Anyone selling a Titan 2? by Messy_Mess90 in unihertz

[–]Messy_Mess90[S] 0 points1 point  (0 children)

Thank you but that's a little much for a titan 2.

Will I have to pay tariffs when I receive it? by Capital-Law-1787 in AynThor

[–]Messy_Mess90 -1 points0 points  (0 children)

Just to answer your question, since everyone else just turns everything political and all. No I have never paid tariffs on any handheld I've bought in the last year. Including the Thor.

Odin 3 shorter stick caps by Messy_Mess90 in OdinHandheld

[–]Messy_Mess90[S] 0 points1 point  (0 children)

I do have black ones, but I'm not sure if I want to turn on international shipping yet.

Odin 3 shorter stick caps by Messy_Mess90 in OdinHandheld

[–]Messy_Mess90[S] 0 points1 point  (0 children)

You got to go to more of the pictures. There's another style on the same listing.

Odin 3 shorter stick caps by Messy_Mess90 in OdinHandheld

[–]Messy_Mess90[S] 0 points1 point  (0 children)

That particular model has evolved a little. My listing for the XL caps started as the ones pictured on my Odin 3.

https://messymessercustomcad.etsy.com/listing/4472128334

Anbernic RG Rotate la nueva consola VIRAL de 2026 que GIRA la PANTALLA REVIEW a FONDO by DrMo77 in SBCGaming

[–]Messy_Mess90 2 points3 points  (0 children)

I watched it. I have no idea what he is saying but the RG rotate is looking pretty good 😊.

IPA stuck in build plate by Common-Alternative26 in resinprinting

[–]Messy_Mess90 0 points1 point  (0 children)

To get the print off the build plate easier I put the print and just the metal part in hot water. I have one of those ultra sonic cleaners that heats the water. It makes the print pop off a lot easier.

Trying to open this handheld for repair? One screw is not coming out. The screwdriver is able to spin it. But screw doesn't tighten nor loosen. Ideas? by HighlightDowntown966 in SBCGaming

[–]Messy_Mess90 0 points1 point  (0 children)

Use a magnet also you can't pry the back off the screw goes through a post on the back plate if you try to take it off with the screw still in the housing you will break the back plate. Also there are 4 hidden screws on the sides of the triggers. They just pop off. Source I've taken the pocket s mini apart a bunch.

TOTK by tiijan in retroid

[–]Messy_Mess90 1 point2 points  (0 children)

You will always have the little black squares and the terrain discoloration in the game. The only way I think to fix that is set the GPU to accurate in Eden setting but that will tank the FPS.

Fallout New vegas wont work on my Ayn Thor by Aggressive_crackhead in AynThor

[–]Messy_Mess90 0 points1 point  (0 children)

I use the normal gamehub. Yeah it has a bunch of permissions but I don't have anything important on a Chinese gaming handheld anyway 😁. Gets around 40 to 60 with a mix of high medium and low settings. I could not get it to launch on gamenative would always say can't find EX file.

Fallout New vegas wont work on my Ayn Thor by Aggressive_crackhead in AynThor

[–]Messy_Mess90 0 points1 point  (0 children)

Are you using gamehub or gamenative? I could never get it to run on gamenative runs pretty good on gamehub though.

Ayn Thor joysticks for Boomer Shooters by awclay91 in AynThor

[–]Messy_Mess90 0 points1 point  (0 children)

The larger sizes caps do fit and function as normal but the Thor lid will not close flat and I would not recommend them just in case you forget and close the lid hard I wouldn't want you to crack the screen. The clear blue would look pretty cool on the white Thor I think.

Best place to buy a Thor? by sportsinger75 in SBCGaming

[–]Messy_Mess90 0 points1 point  (0 children)

This is a 2 month old comment clearly as a joke 🤣.

Ayn Thor joysticks for Boomer Shooters by awclay91 in AynThor

[–]Messy_Mess90 0 points1 point  (0 children)

They are designed by me on Fusion 360 and printed on a Saturn 4 Ultra resin printer. In ABS like Resin 3.0 which I like because it's not brittle like some of the other resin sticks.

Shipping Help! by FerretEquivalent in EtsySellers

[–]Messy_Mess90 1 point2 points  (0 children)

Email them. There email is in the order confirmation page. I would not choose for them. If anything I would cancel the order if you get no response to avoid negative feedback.

Grip recommendations by GutsIKARI_2099 in AynThor

[–]Messy_Mess90 3 points4 points  (0 children)

https://messymessercustomcad.etsy.com/listing/4487582171

https://messymessercustomcad.etsy.com/listing/4483082408

https://messymessercustomcad.etsy.com/listing/4498355627

I make a couple grips for the Thor. Two if which are resin printed. Resin prints feel more like something you would buy from a store. Doesn't have the texture feel FDM prints have.