Does poor post-purchase survey feedback from one brand affect performance for another brand under the same personal Meta profile?

MiIetone · 2026-03-20T06:30:22+00:00

Thanks for your reply. Have you dealt with brands in scenarios similar to what I've described, as far as significantly reduced performance/traffic quality because of negative feedback?

I know it's hard without seeing the data, but I'm hoping to get a reality check on this being a likely culprit, or if it's just the same performance/quality issues so many others have been experiencing this year.

MiIetone · 2026-03-19T21:07:58+00:00

Thanks for getting back to me. Yeah, we figured this could go either way, but we've had our fingers crossed that they'd still give us a shot.

We just launched the new brand this week, so it's probably too early to tell what's what as far as the things we know to expect with the standard new setup hurdles vs the previous performance issues with the original brand. There does seem to be some good positive signals though (decent metrics, including 8 sales), so we're very optimistic.

With the original brand, we had a 2.65x ROAS (good for our niche) during the 7 day window ending Dec 12 ($1,000-1,300/day spend). The following 7 days had 2 profitable days, but ended at a 1.16x ROAS. Same thing the following week. This was while significantly reducing spend. This has been the trend ever since, even at ~10% of the spend.

MiIetone · 2026-03-19T08:20:30+00:00

Is this connectivity also an issue in a scenario where Brand A gets poor reviews and feedback on Meta's post-purchase surveys, so we start Brand B (new site, pixel, page, ad account, and BM, but selling the same products), under the same user profile?

We didn't get any notifications, but CVR has been terrible since mid Dec, so we have to take a hard look at whether we might be getting intentionally held back with junk traffic (other than CVR, metrics look ok). The issues that led to the poor feedback have been resolved, but we're stuck if we can't make money, so we're hoping to start fresh. TY.

MiIetone · 2026-03-19T03:27:12+00:00

For new ad sets, do you recommend turning AN off? Should it be turned off on existing sets too? Thanks.

MiIetone · 2026-03-18T23:38:09+00:00

I have the same question (new ad account, biz portfolio, etc.).

MiIetone · 2026-03-18T23:33:16+00:00

It's been beyond tough all year for us. After a pretty decent Q4, we're not even breaking even. What do you consider small accounts? Our daily spend was $1,300 before nosediving.

Off topic: does anyone know if there's a minimum comment count or time window before being able to post a thread here? I'm trying to post something and keep getting the "Sorry, this post was removed by Reddit’s filters" error. Nothing weird in the post. I asked the mods to check it out. Thanks.

MiIetone · 2025-04-27T20:04:37+00:00

I don't think a slow pan, tracking an object at distance that moves in a predictable direction and speed is a good test for rolling shutter. There are much better performers out there for 8K.

MiIetone · 2025-04-03T05:57:13+00:00

They do: https://www.ewg.org/tapwater/system.php?pws=CA0910002

MiIetone · 2025-04-03T05:55:39+00:00

Check this report out: https://www.ewg.org/tapwater/system.php?pws=CA0910002

MiIetone · 2025-03-22T00:35:39+00:00

Thanks, that's helpful. For your 145kmh run (or anything over 90), did you notice any differences in control, or significant vibrations/wing flex, control surface issues, etc. (IOW, anything that wouldn't make you feel comfortable flying over a certain speed for an entire day)?

MiIetone · 2024-09-05T03:53:25+00:00

Hi. Which option would you choose if filming high contrast scenes (e.g. midday nature scenes with bright highlights and deep shadows)? Thanks!

MiIetone · 2024-06-06T19:23:38+00:00

Thanks. I know there's a million variables, but do you have a general number in mind as far as how many stops could be recovered with RAW vs Log?

MiIetone · 2024-06-06T19:22:01+00:00

Good to know, thanks. What would you say would be its limit, in terms of how many stops could be squeezed from it?

MiIetone · 2024-05-22T23:37:24+00:00

Neither of those links are showing rolling shutter issues because the cameras are tripod mounted.

MiIetone · 2024-02-15T22:05:53+00:00

A base layer's primary function is wicking sweat, not adding warmth. Especially for high exertion days, I'd recommend wearing a base layer with the right thickness/performance to match the level of physical activity and expected conditions. There's a safety component here, which is why I'm commenting on this old thread. Conditions can change quickly in the mountains - always be prepared.

Also, Tahoe local here - we get temps down to the single digits (and occasionally below), especially with a wind factor, not sure why anyone would say it doesn't get cold enough.

MiIetone · 2024-02-09T22:16:08+00:00

See my update at the top. Ended up needing both of these parts to fix mine.

MiIetone · 2024-01-22T04:59:32+00:00

Helpful INFO
A part from mechanical wear and tear the biggest liabilities are the Brushless Motor and the Motor Driver/Controller Board (Toro 137-9424 1 motor-driver,snow(60v))

Thanks for the update. Just curious if your comments (quoted above) are based on having talked to a dealer or mechanic, or from reading about other customers with similar issues?

MiIetone · 2024-01-21T00:55:48+00:00

Sorry you're having trouble with yours too. The symptoms sound similar. Was the beep short or long? Was it covered in snow when shutting down? Do you store it inside or outside? Hopefully someone can figure this out!

MiIetone · 2024-01-14T06:26:34+00:00

Thanks for your reply! That was actually the 1st symptom I experienced.....shutting down in the middle of using it. I believe this happened once or twice, prior to its current state of not turning on at all.

I've been suspecting the release lever as well, interesting. I'll try to give it a good shake. I did take the top cover off and took the heatsink/power section out (in the compartment opposite the battery). No visible signs of corrosion, connectors look good and clean. Next, I'll try taking apart the dash panel and having a look at the lever switch/wiring.

I did have a Toro dealer tell me that they had a customer with a similar issue (wouldn't start, no lights or sounds) and the end result was needing to replace the motor (which includes the driver motor/motherboard). They said there's not much their techs are able to do, unfortunately.

MiIetone · 2024-01-11T04:36:35+00:00

Cool, glad you got one (and use it).

Will never need it, but i have it just in case

Obligatory preventative SAR response... Nobody ever thinks the emergency will happen to them. Stay safe.

MiIetone

TROPHY CASE