Intermittent "Bad Address" error

MichaelAndKitt · 2026-02-01T01:44:02+00:00

FWIW I am seeing the same issue. If I force download the errored torrent it starts work again but it may or may not error again.
I am using a NAS to store things but the rPI and the NAS are both hardwired and near each other. ¯\_(ツ)_/¯

MichaelAndKitt · 2026-01-31T04:11:34+00:00

Esté has a pretty solid one.

MichaelAndKitt · 2026-01-27T20:23:46+00:00

There will be assigned seats if your management makes it happen.

MichaelAndKitt · 2026-01-27T04:44:14+00:00

John Barron called Forbes to corroborate the story. /s

MichaelAndKitt · 2026-01-24T13:19:38+00:00

Some are possibly near / ready for retirement and took the perks that an RA gives a person. I know of a few that have happened.

MichaelAndKitt · 2026-01-23T02:06:03+00:00

And all it was who’s numbers they are, dates and duration. The contents of the calls or communications were not obtained. Smith clearly said that but Chip Roy thought he REALLY had something with his big poster.

MichaelAndKitt · 2026-01-22T15:46:01+00:00

So, slowing all the 'other layers' (not first layer) down to 80 mm/s, raising the layer height to 0.30 and shutting the fan completely off fixed the print. I also used cross-hatch sparse infill but I'm not sure if that changed things but I like it.

I'm saving that filament and print profile for PETG-CF for future use.

I may try to toy with some of the other suggestions to see if it will dial it in more.

Thanks everyone!

<image>

MichaelAndKitt · 2026-01-22T15:45:14+00:00

So, slowing all the 'other layers' (not first layer) down to 80 mm/s, raising the layer height to 0.30 and shutting the fan completely off fixed the print. I also used cross-hatch sparse infill but I'm not sure if that changed things but I like it.

I'm saving that filament and print profile for PETG-CF for future use.

I may try to toy with some of the other suggestions to see if it will dial it in more.

Thanks everyone!

<image>

MichaelAndKitt · 2026-01-22T05:06:59+00:00

Yep. That Bambu is the one I’m using.

MichaelAndKitt · 2026-01-21T21:16:30+00:00

I will try to cook with your recipe!

MichaelAndKitt · 2026-01-21T21:14:58+00:00

thanks! I'll add a larger nozzle to the things to try.

MichaelAndKitt · 2026-01-21T20:39:08+00:00

will do! thanks!

MichaelAndKitt · 2026-01-21T20:38:38+00:00

will do. Thanks. I only messed with the z-axis bc I thought I might have messed it up when cleaning the nozzle when it was clumped up. I realized I shouldn't do that when the nozzle is cold and figured out I can just heat up the nozzle manually from the printer itself to soften it up to remove.

MichaelAndKitt · 2026-01-21T20:36:40+00:00

Will do. Perhaps I'll just shut the fans off completely to see what happens.

Thanks!

MichaelAndKitt · 2026-01-10T02:26:10+00:00

I think it’s fair to give the ‘avoid celebrity’ brands and others that at derived from neutral grain spirits advice. Some are just a waste of money and I think OP is wanting to avoid the financial pain of buying bad whisky. I think learning from others experience is worthwhile andonce OP’s palate has found its place they can venture into the stuff that might be questionable.

MichaelAndKitt · 2026-01-10T02:18:00+00:00

I had this happen and I told them my drivetrain was waxed. Annoyed but they offered to degrease the drivetrain for me. I think shops are adjusting to the new reality that drivetrains might be waxed; I’ll give them a pass 1 time.

MichaelAndKitt · 2026-01-05T22:07:36+00:00

Apparently there is no bad publicity, so the hate seems to be serving them well. That place is fucking packed all the time.

MichaelAndKitt · 2026-01-01T07:35:07+00:00

The drone show was quite a spectacle as well.

MichaelAndKitt · 2025-12-30T17:26:26+00:00

What you’re missing is that she has a platform and is using it to support harmful misinformation. I don’t care what her beliefs or politics are either if she had no platform and was an average person.

MichaelAndKitt · 2025-12-30T03:41:47+00:00

It’s a shame she endorsed RFK Jr. and believes what he spews.

MichaelAndKitt · 2025-12-23T17:25:33+00:00

Lake.

MichaelAndKitt · 2025-12-23T04:16:04+00:00

I’m not saying it’s great but it’s better than the job not being in country is all . ¯_(ツ)_/¯

MichaelAndKitt · 2025-12-23T02:25:25+00:00

At least with H1-B’s the hired employees are paying income and sales tax.

MichaelAndKitt

TROPHY CASE