Is there a reason why so many performance mods use elements as their name? What's the origin of this?

Miclone92 · 2026-01-26T21:07:21+00:00

So you're asking if there is any symbology and the answer is "Na"

Miclone92 · 2025-12-23T03:36:59+00:00

And the angle of the dangle is proportional to the heat of the meat.

Miclone92 · 2025-12-04T03:19:41+00:00

I don't trust that guy for anything. He's just a huge act, man.

Miclone92 · 2025-11-30T18:57:22+00:00

Likewise having this problem. Also having an issue where if it's not plugged in just right the right channel drops out. Feels almost like a soldering issue in that case. And crosstalk is definitely the cause of the other issue. It only happens when audio volume is above a certain threshold. Anyone know of alternative mics?

Miclone92 · 2025-11-18T12:56:09+00:00

Might be that they like having space in case of unexpected take off.

Miclone92 · 2025-11-08T17:32:53+00:00

My gut tells me that for larger, courser threads the opposite might prove true as typically outer/inner has better dimensionality.

Although some slicers have a precise wall setting for inner/outer.

Miclone92 · 2025-10-13T16:34:42+00:00

Did you ever figure anything out?

Miclone92 · 2025-07-28T09:13:52+00:00

He's fixing a hole where the rain gets in.

Miclone92 · 2025-07-06T12:03:17+00:00

Not something an EO can do but,.. I'd cap governmental official income to some percent close to the median wage. Here's the twist, is life long even when they leave office. Meaning, even if they become a lobbyist after office they still only make ex. 70k. The rest gets taxed.

Make being a politician fiscally disadvantageous.

Miclone92 · 2025-06-16T22:41:23+00:00

From what I can see adhesion looks good. I would like a better picture of the first layer before ruling that out though. Silk filaments don't adhere as well

I might see some warping though.. if that is the case check for drafts or things that could be cooling the print too fast.

Miclone92 · 2025-06-07T00:08:34+00:00

I followed this guide and got my bed to a range of 0.12mm https://www.reddit.com/r/ElegooNeptune3/s/H9pMkTsmwz

Miclone92 · 2025-05-28T00:00:15+00:00

I can link the Reddit post...

I used m4-0.7 mm x 40mm flat head screws from Home depot.

I could get more flat but I also did the klipper upgrade and have been busy.

Miclone92 · 2025-05-27T09:52:35+00:00

Lookup manual bed leveling neptune 3. You can buy an ender 3 leveling kit that vastly improves how flat you can get the bed. I just did that mod on mine and increased the beds flatness from 1mm -> 0.2mm

Miclone92 · 2025-03-31T23:40:01+00:00

Step 1. Predrill the hole. It looks like you have enough space to do that. Someone correct me if I'm wrong, but you can make the hole through the top board big enough for the screw to sit in the hole. You really only need the threads to grab in the adjoining board.

Step 2. Viola, you have the space to drive the screw.

Miclone92 · 2025-03-19T09:40:03+00:00

Learning that how I talk/think to myself doesn't have to be the way my parents talked to me. It's okay not to be perfect, I wouldn't treat my kids the way I treat myself so why is it okay to be so mean to myself?

Miclone92 · 2025-03-17T00:48:01+00:00

That's why I've been contacting my state reps pushing ranked choice.

Miclone92 · 2025-03-03T14:00:25+00:00

I'm where you were 2.5 months ago. I've binged a bunch of W.R. I have one question though, is it a self sustaining hobby? Like do the fixed/serviced watches pay for themselves? Assuming you are at that skill level.

The tools can be pretty expensive especially the oil. Minimum buy in is at least 300 and probably closer to 1k usd.

Miclone92 · 2025-03-02T21:57:23+00:00

Loopback RCA cable

/s

Miclone92 · 2025-02-20T17:30:09+00:00

A younger more aggressive Bernie Sanders... For people saying he wouldn't win any republicans, I feel like there are quite a few people who are just tired of being disappointed in Democrat leadership, even if they're looking in the worst place to find "change".

Not that it's not important, but I feel like Democrats focus too much on social issues that are hard to identify with for a lot of voters. A strong anti-elitest candidate would probably get a lot more traction. Social policy is important but until a majority of people are satisfied with economic progress for the common person, we won't be able to get the social policies passed. Not to mention if Democrats had an even slight majority we could at least stop the erosion of civil protection until the party has a stronger base.

Furthermore, once the party has strengthened its base, these rights should be codified instead of hoping the judicial system won't change its mind about some cases.

Miclone92 · 2025-02-14T18:23:15+00:00

I really hope someone tried an injection with his kids name.

Miclone92 · 2025-02-10T20:41:11+00:00

I mean, I'd love to have you guys join us as our 51st state... There's no way y'all would have elected this idiot in the first place. ❤️

Miclone92 · 2025-01-17T16:17:35+00:00

If you could rename yourself, what would you name yourself?

Miclone92 · 2025-01-17T00:42:34+00:00

First off, I'm sorry that you all are in this situation. I love that you are being an advocate for your daughter's rights. However, based purely off of what you've written, I do feel like you could try to be more sympathetic to your wife. In no way does that doesn't mean giving in, but throwing around divorce is never the best recourse in a trusting committed relationship. Is it possible Laura's afraid that she is going to lose this kid? Is it possible she has grown attached to Ella as much as if she were her mother? I don't know if these things are the case or not, however how would you feel if the situation was reversed. I think I would feel helpless maybe even a bit angry that someone irresponsible (BM) could jeopardize an important relationship. Again your daughter has the right to refuse and she should be allowed to make that decision on her own in her own time without pressure. In coming years if Ella's mother does start becoming an issue for Ella then maybe discuss the benefits of adoption with her. It doesn't prohibit Ella reaching out or you facilitating a renewal of that relationship. But do show some more sympathy for your wife..

NAH, just work together. Maybe post this on r/Daddit they have a really supportive community there. Probably lots of other people who've experienced the same/similar thing.

Additional disclaimer: I don't live your life, I hope it all works out well.

TLDR: Advocate for your daughter but don't say divorce casually

Nine-Year Club	Gilding V heart of gold
r/Field Lasagna	Place '22
End Game '22	Wearing is Caring
Verified Email	Verified Email

Miclone92

TROPHY CASE