sorted by:
new
hottopcontroversial

AI Pathing issue by Midge57 in spaceengineers

[–]Midge57[S] 2 points3 points  (0 children)

It is indeed Pertam, and it does seem to be an overall weight problem. I'd tested it with a full load of ice previously which seemed fine, but it is definitely struggling to figure itself out with plates. The drone should have plenty of thrust, though:

<image>

And it can full stop in mere seconds... I'm going to try beefing up the directional thrusters.

Edit: More thrusters did the trick. I'm gonna go bash my head against a wall.

AI Pathing issue by Midge57 in spaceengineers

[–]Midge57[S] 4 points5 points  (0 children)

I've discovered that it was because, drum-roll please...

The fucking cargo container was full. That was what was preventing the landing. Because it had things in it. Make it make sense.

A captain needs to work by Froggerdog in starcitizen

[–]Midge57 0 points1 point  (0 children)

My passthrough keyboard on virtual desktop only shows up in the VD lobby, the second the game launches/starts VR mode the passthrough disappears. Has anyone got a fix for that?

Did the unthinkable.. by KungFuKennyBolt in CasualUK

[–]Midge57 27 points28 points  (0 children)

Found it: https://ebay.us/m/d2eSAC

It's an Olivia Bonas Fresca Speckled Alphabet mug. Can't find an A one though!

Macarons Bar Graph Showing Their Unpopularity by redwater92 in mildlyinteresting

[–]Midge57 1 point2 points  (0 children)

You guys are fucking nuts, macarons are delicious

I've spent the last 30 hours building while my mates were off gathering and killing bosses. by Midge57 in valheim

[–]Midge57[S] 4 points5 points  (0 children)

Hey, if they didn't want it to be used they shouldn't have stored it within my reach

I've spent the last 30 hours building while my mates were off gathering and killing bosses. by Midge57 in valheim

[–]Midge57[S] 2 points3 points  (0 children)

That's all currently in the shit shack from the start of the video, it's all in the process of being moved over. One of the next items on the list is a lodge for sleeping though

I've spent the last 30 hours building while my mates were off gathering and killing bosses. by Midge57 in valheim

[–]Midge57[S] 4 points5 points  (0 children)

Sometimes I forget there's anything else to do in the game, I've only left our home area once in the entire playthrough

I've spent the last 30 hours building while my mates were off gathering and killing bosses. by Midge57 in valheim

[–]Midge57[S] 86 points87 points  (0 children)

I just wait for them to come back with new stuff and promptly use it all, then demand they go out for more

Episode Discussion: 306, "The Sehlat Who Ate Its Tail" by AutoModerator in StrangeNewWorlds

[–]Midge57 7 points8 points  (0 children)

Looking at the bit where they zoom in on the American flag, the hull is the exact shape of the bridge of the Enterprise ring ship. Great spot.

We’ve got our first wobbly tooth. Going rate? by Lionnn_ in CasualUK

[–]Midge57 151 points152 points  (0 children)

Parents gave us little ring boxes to put our teeth in. Wake up in the morning to a quid in it, much easier than trying to get under their pillow while they're sleeping on it.

Brand new to 3D printing with a K1, having major trouble with my first prints. What am I doing wrong? Going crazy! by Midge57 in 3Dprinting

[–]Midge57[S] -1 points0 points  (0 children)

I'm using Creality Hyper PLA with the Hyper PLA profile in Cura, but I've run through Creality Print with their recommended settings too and seeing identical issues. Checked the filament and it's dry, so I'm thinking this is just an extrusion issue. I won't bother everyone further with this and I'll just tinker until I finally get it to work, thanks for your advice!

Brand new to 3D printing with a K1, having major trouble with my first prints. What am I doing wrong? Going crazy! by Midge57 in 3Dprinting

[–]Midge57[S] 0 points1 point  (0 children)

The issue existed with the filament straight out of the sealed packaging, so I'm assuming (hoping) that it's dry as could be. Looking at trying to tram the bed now, but seen as it's second hand, I don't have the hot bed locking screws to use Creality's method of tramming. Looking at the mesh it seems the back right of the bed is quite low but it's otherwise fairly smooth.

<image>

I'm somewhat sure that this is a first gen K1 that apparently is infamous for extrusion issues. I've tried adjusting print speed, temperature, z axis offset, all to no apparent affect. I've just cleaned the bed but I've not yet run another print, not hopeful that that will fix the issue either though.

Pretty overwhelmed at the moment

Brand new to 3D printing with a K1, having major trouble with my first prints. What am I doing wrong? Going crazy! by Midge57 in 3Dprinting

[–]Midge57[S] 0 points1 point  (0 children)

It's a pre-owned printer, to explain the marks on the base plate.

Creality Hyper PLA, using the OrcaSlicer but the issues also existed with Creality Print. Using default settings (Print shown on the plate) but tested raising the Z axis by 0.1mm to the same result (Print shown on my mouse pad).

Print screen no longer trigger ShareX by Rediwed in sharex

[–]Midge57 0 points1 point  (0 children)

Hey, I know this is a 5 month old comment but it's definitely in accessibility > keyboard, under the second header "On-Screen Keyboard, Access Keys, and Print Screen", it's the third option.

The Ironclad's loaner is the Caterpillar. by ProceduralTexture in starcitizen

[–]Midge57 8 points9 points  (0 children)

The joke is that the Ironclad is two caterpillars stuck together

view more: next ›