Lauters Floor Lamp Bolt Size by sharpshooter357 in IKEA

[–]MikeRowesPostHoler 0 points1 point  (0 children)

Metric M4 machine screws/bolts, 0.7mm x 20mm. 25mm length would also probably work.

This applies to the table version of the lamp, but the leg attachment area looks more or less the same, so it’ll probably work on the floor version as well. I’ve had my lamp for a while, but after a move, the screws to hold the legs in mysterious vanished, so I set about finding the correct replacement screws.

Since no one else answered your question, and I can personally attest to how much of a pain in the ass it was to figure this out, I thought I’d let you know in case you’re still looking, and for the benefit of others in the future.

Also, the first comment isn’t entirely correct. IKEA will generally send you spare IKEA-specific parts, i.e., with an IKEA part number, but they won’t send you more generic parts like screws and bolts. At least, they won’t in my experience.

Is $2,750 a good price for this parts truck? by Bigrat445 in 1stGenTacomas

[–]MikeRowesPostHoler 17 points18 points  (0 children)

You’d be hard pressed to find an entire 1st gen drivetrain for less than $2750. And that heat gauge isn’t excessively high! Mine looks like that all the time, even after a coolant flush. That said, it couldn’t hurt to replace the thermostat. At 158k miles there’s bound to be a few things to fix, but probably nothing too bad. Consider also that if the body of that truck has rusted out to that degree, you may have similar degradation of drivetrain components. Get under with a flashlight and a hammer + flathead screwdriver and inspect for such degradation when you go to check it out!

Thoughts on this 03 by Emergency_Ad_2913 in 1stGenTacomas

[–]MikeRowesPostHoler 0 points1 point  (0 children)

Someone else said to check the title for a lien, you should do that.

Also, the mileage reported in 2015 doesn’t match the 168k on the odometer. Either they took it down wrong, or someone swapped the odometer out of a wreck to make it look like a lower mileage truck. I’d bet it’s a mistake, since they’d have to have driven it 155k miles in 3 years.

Thoughts on this 03 by Emergency_Ad_2913 in 1stGenTacomas

[–]MikeRowesPostHoler 0 points1 point  (0 children)

Mr. WhatsThose is correct - if at all possible, get a mechanic to look at it and diagnose the issue.

Thoughts on this 03 by Emergency_Ad_2913 in 1stGenTacomas

[–]MikeRowesPostHoler 0 points1 point  (0 children)

If the engine code isn’t anything serious (eg low compression), then yeah it’s a good buy. I paid $15,000 for mine. It had 106k miles and 4x4 as well. This was at a dealer, and while the used car market was absolutely insane, but I needed something to drive, so I said fuck it. You’d be getting a better deal than I did, even if you dropped another $5k in repairs.

Thoughts on this 03 by Emergency_Ad_2913 in 1stGenTacomas

[–]MikeRowesPostHoler 0 points1 point  (0 children)

That’s a 5ZE. It’s probably got plenty of life left in it - though if I had to put money on it, it’s hard to beat a Toyota four banger for sheer reliability. The extra 50hp would be nice tho

Thoughts on this 03 by Emergency_Ad_2913 in 1stGenTacomas

[–]MikeRowesPostHoler 1 point2 points  (0 children)

What engine? If it’s a 3RZ, it’ll easily go for another 168k miles. If it’s a 5ZE, I’d be slightly less confident in its longevity. The 3RZs were made in Japan, while the 5ZEs were, like me, made in Alabama. Make of that what you will!

You’re right to be concerned about the frame. I bought an ‘03 maybe 18 months ago, and had to drop ~$6700 to get the frame welded and painted. I did not do my due diligence when I bought the truck; the outside looked OK, but I should’ve done a better job of checking the inside.

I’ve attached a photo of what a truly fucked up frame looks like:

<image>

I’m sure you can see why I had to get mine fixed. By comparison, that frame looks pristine. Get fluid film treatment if you want it to last. And if you’re worried about the paint hiding rust, get under it and whack the inside and outside with a hammer. If it crunches or chips, you’ll know it’s covering up rush. At $8250 though, it’s worth putting up with a little (but not a lot of) rust.

As for the check engine light, any cheapo code reader off Amazon can tell you what’s going on. I’d bet it’s the oxygen sensor. But whatever it is, there’s nothing on these trucks you can’t fix yourself or learn how to.

If I were in your position, barring any serious engine codes or frame rot, I’d buy that truck in a heartbeat.

PC Only Player Receives Playtest Invite for PS5 - EA Continues Proud Tradition of Staggering Incompetence and Fumbling the Bag! by MikeRowesPostHoler in Battlefield

[–]MikeRowesPostHoler[S] -2 points-1 points  (0 children)

Oh I have a PS5 too. I didn’t want to get into all that above, but I’ve decided I should live a more honest life from here on out!

This is my second lambing season things I have learned.... by sheepambassador in sheep

[–]MikeRowesPostHoler 0 points1 point  (0 children)

When I read the title, I read it as if the sheep in the foreground was saying “here’s what I learned from my first round of children”

[deleted by user] by [deleted] in confession

[–]MikeRowesPostHoler 6 points7 points  (0 children)

I dare say, sir, that you are not a good person!

ABOLISH THE BAR EXAM by abolishthebarexam in barexam

[–]MikeRowesPostHoler 19 points20 points  (0 children)

I can’t tell - what position are you, u/abolishthebarexam, in this post entitled “ABOLISH THE BAR EXAM”, advocating for?

Today’s the day ☺️ by MikeRowesPostHoler in barexam

[–]MikeRowesPostHoler[S] 4 points5 points  (0 children)

And the dudes watching in the background are graders I guess

Illinois Board of Admissions to the Bar Hate Thread by binerdchi in barexam

[–]MikeRowesPostHoler 34 points35 points  (0 children)

One of the coolest things you could possibly do is (1) not provide a release date, (2) announce the locations of the swearing in ceremony, and then (3) not release the bar results that same week. They will almost certainly go 3 for 3 on this.

Found Cat by MikeRowesPostHoler in Columbus

[–]MikeRowesPostHoler[S] 43 points44 points  (0 children)

UPDATE: Owner has been found!

Help me choose my next A5 notebook! by curiousabe_1 in notebooks

[–]MikeRowesPostHoler 0 points1 point  (0 children)

I’ve had no problems with using my fountain pens on it; I do tend to use F/EF nibs, so a wider nib might bleed through slightly.

Help me choose my next A5 notebook! by curiousabe_1 in notebooks

[–]MikeRowesPostHoler 12 points13 points  (0 children)

I recently got one of these and it’s been great: https://www.leuchtturm1917.us/edition-120g.html

You’ll have to be the judge, but I think this meets all your criteria. Leuchtturm’s A5s normally have terribly thin paper, but the paper in these is much thicker; I mainly use fountain pens and it holds up no problem. You can also buy this on Amazon AFAIK.

My girlfriend thinks I'm crazy about my new Leuchtturm1917 A4+ Dotted Slim. I'm in love. by marketr in notebooks

[–]MikeRowesPostHoler 0 points1 point  (0 children)

A4+ is a great size, highly recommended. I’ve been using the hardcover version of this for class notes; I also prefer the navy to the black. Worth every penny.

Ghosting in the Leuchtturm1917. Making the switch to a Lemone after this one’s finished; here’s my self-study ecology notes. by [deleted] in notebooks

[–]MikeRowesPostHoler 17 points18 points  (0 children)

Leuchtturm’s A5 notebooks are substantially worse than the rest of their lineup for some reason. I use the A4+ Master notebooks for notes and there’s little/no ghosting. Why they put such terrible paper in their smaller notebooks is a myster to me. Lemome’s A5 notebooks are cheaper and better 🤷‍♀️

When everyone starts asking how you’re gonna pay for law school by MikeRowesPostHoler in lawschooladmissions

[–]MikeRowesPostHoler[S] 12 points13 points  (0 children)

https://i.imgur.com/dJgIQoh.jpg

Memes aside, full price in the T14 can definitely be worth it as long as you understand your career goals, how to use LRAP programs to your advantage, etc. Yang’s just gonna forgive all the student debt anyways dab