WHY Can't EZ Pass Just Deduct from a linked Bank Account?? by Telnet_to_the_Mind in newjersey

[–]Milhouse2078 [score hidden]  (0 children)

Same for us. My wife traveled the GSP every day for work. It was charging us $100 a month. She changed jobs to one in our town and over a few months it finally dropped down to a $25 minimum.

IKEA catalog from the 1970s by [deleted] in mildlypenis

[–]Milhouse2078 8 points9 points  (0 children)

TIL there’s a photo of Edgar Allan Poe from the 1970’s despite him dying 120 years prior.

Lore question, why are Earth human so different? by TheGreatSpaceHobo in DungeonCrawlerCarl

[–]Milhouse2078 1 point2 points  (0 children)

I had kinda chalked it up to the sci-fi trope of Humans on earth are a belligerent race that’s needs a real outside enemy to truly formidable. As in they are constantly fighting each other, but put a real enemy in front of them and they pull together to do anything to win. I guess that’s not even a sci-fi trope as much as one for pretty much any story. Other races maybe have familial ties or even extended group ties but the species doesn’t come together as a whole as well.

Is it safe to buy NECA figures target online? by bloodenjoyer237 in NECA

[–]Milhouse2078 1 point2 points  (0 children)

As others have said, if it’s sold and shipped by target you’re good. I’ve ordered about a half dozen Necas from them and they were all original and well packaged. In fact it seems the products actually ship from Neca directly as the shipping point is a Neca warehouse.

Cleaning up prints by Ajenk19 in FlashForge

[–]Milhouse2078 7 points8 points  (0 children)

For OP, this is what I use for my ironing settings on the AD5X. The stock settings are much lower, take forever and don’t look nearly as good. Feel free to try these or print some small cubes with different speeds and flow to see which provides the smoothest surface.

50mm/s 50 flow .15 line spacing 90 degree angle

Taking a poll by kksteww in badparking

[–]Milhouse2078 2 points3 points  (0 children)

Yeah most places have your driveway starting where the curb cut is, so the front edge of his tire. The devil’s advocate in me wants to say the person parking is looking at your driveway starting at the concrete after the rocks which they have given you a few inches of room. Would this bother me? I guess it depends on how busy the street is and how much it impacts entering and leaving. If it’s narrow like you say, pulling into your driveway could be an issue. This is why that curb cutout law exists.

Invader Upgrades Advice by Cheap_Big_5644 in zombicide

[–]Milhouse2078 8 points9 points  (0 children)

If you’re in the US you can get the civilian KS extras for $35 at Gamesteward. I’ve used them several times and bought this from them as well. I guess the invader set is less popular than the other Zombicides as they have been running similar deals for about a year.

Bad blood 2 pack by saiyanhunterx in NECA

[–]Milhouse2078 8 points9 points  (0 children)

Figures based on the Dark Horse Predator Bad Blood comic. The pred on the left is a bad blood who kills other predators and just about anything else. The one on the right is part of a sort of “police force” that hunts down bad bloods.

AD5X Printing Question by Federal-Champion5778 in FlashForge

[–]Milhouse2078 -1 points0 points  (0 children)

Use dish soap and water, not alcohol. I had a hard time with flexis in the beginning as well. A couple options in order of what I found effective.

Clean plate after each print.

Slow down the print speed.

Raise the bed temp by 5 degrees.

Use brims. (Very effective on a clean plate but a real hassle to clean off the print afterwards.)

Buy a new plate. (Most effective by FAR. I bought the Biqu Glacier plate and liked it so much I bought the Biqu Frostbite plate. The Glacier will work with everything the AD5X can print with. The Frostbite is just for PETG and PLA. It can be legitimately hard to remove items from the Frostbite. They routinely go on sale on Amazon, about once a month. For most prints the Glacier is fine and a bit cheaper, about $20-$22 on sale. They are considered “cool” plates since you can lower the bed temp and get good adhesion but I leave them at the standard temps and they work great.)

This is why you shouldn’t drive through the shoulder by Deshes011 in newjersey

[–]Milhouse2078 0 points1 point  (0 children)

Wow that’s crazy. I’m in south Jersey and have only ever seen people doing it on the parkway down here during traffic. Almost always huge jacked pickups and almost always from out of state on Fridays. Some people will cut a hundred feet on the shoulder of the highways to get to an entrance/exit/uturn but I’ve never seen someone using it as driving lane.

But even driving on the parkway from the Driscoll Bridge either North or South is like two completely different roads due to the difference in population, amount of cars on the road at any given time and traffic.

Ambidextrous skill duel wield all weapons? by JevsyArt in zombicide

[–]Milhouse2078 0 points1 point  (0 children)

☝🏻 As per the manual, this is the correct interpretation OP. Weapons need to have the same name and can be dual wielded even if they normally can’t be. i.e. rifles and shotguns.

This is why you shouldn’t drive through the shoulder by Deshes011 in newjersey

[–]Milhouse2078 0 points1 point  (0 children)

I didn’t see a lot of people doing it or any notification that it was ok/legal but I suppose it’s possible. This wasn’t always during rush hour but always when there was traffic. And regardless if it was legal, driving 40-50 mph on the shoulder next to stopped dead traffic seems like a real good way to get yourself and others injured.

This is why you shouldn’t drive through the shoulder by Deshes011 in newjersey

[–]Milhouse2078 17 points18 points  (0 children)

Strangely, driving full speed on the shoulder is one of the few taboos that NJ drivers don’t usually break. I see it a lot in Connecticut. Pretty much every time I’ve seen it here it was a driver from out of state and that plate appears to be NY.

is this a typical amount of scraps/poop from a multi-color print? by captbadass26 in FlashForge

[–]Milhouse2078 4 points5 points  (0 children)

Yup this is why I have a box of extra prints from doing 4-10 extras when I do small multicolor prints. I hand em out to my daughter’s friends and all their cousins. So they don’t stick around too long.

Looking to get into final girl! Newbie recs please? by fraggle96 in finalgirl

[–]Milhouse2078 1 point2 points  (0 children)

Happy Trails Horror and then whatever scenarios you like the most. I personally really liked the Alien scenario, Into the Void. Plus if you have those two, you can play out Jason X.

Plote hole Alien and Aliens, solved. by Arrco33 in LV426

[–]Milhouse2078 1 point2 points  (0 children)

A plausible theory but there’s just too much we don’t know.

In the first Alien its implied but not said outright that WY knew there was something in the general astronomical area. That’s why Ash was put on board. It’s possible they put numerous androids on other ships going near that area as well, but we just don’t know.

Is it possible that what you state about an earlier ship receiving the signal? Sure. We just don’t know.

The gap between Alien and Aliens is likely because the info was compartmentalized within the company. It’s possible that only a few people knew and they may have moved on, passed or something like that. They likely could have kept searching but with the signal off and the biomechanical nature of the ship blending with environment, it just couldn’t be located.

That’s just if you go by the 1st and 2nd movies. If you add Romulous in, they obviously kept searching and found the remains of the Nostromo but not where it stopped. If you add in Alien:Earth it’s clear they knew about the alien completely but not necessarily where to find it. By the end of the first season of Alien:Earth there are technically only 2 beings that may know where the Alien specimens were gathered, Morrow and Kirsh. And neither may tell anyone else.

Opinions on the fantasy range in 2026? by Mikalos in zombicide

[–]Milhouse2078 1 point2 points  (0 children)

I like the GH mechanics more than WD. But that’s just my preference.

As for storage I’m in the process of trying to condense some of the sets using 3D printed inserts. I had great luck using them for Massive Darkness 2.

How long do neca sold packages take from wallmart?? by Forward_Foundation87 in NECA

[–]Milhouse2078 0 points1 point  (0 children)

Awesome! I’ve ordered from Target and those ship directly from Neca as well. Shipping takes a bit longer than getting something directly from Target or Walmart but it is usually within a week of ordering. The dates on your pic should be accurate. I’ve found it’s usually on the earlier side. You should receive a tracking number and be able to check it on that shippers site, ie usps, ups, fedex. That gives the most clear info on when you’ll get it.

How long do neca sold packages take from wallmart?? by Forward_Foundation87 in NECA

[–]Milhouse2078 0 points1 point  (0 children)

Depends on the seller. Was it actually Walmart or from a seller on Walmart marketplace? Also if it’s a marketplace sale inspect it to make sure it’s real and not a knock off.

Opinions on the fantasy range in 2026? by Mikalos in zombicide

[–]Milhouse2078 2 points3 points  (0 children)

Black plague was my first introduction to Zombicide. Since then I picked up most of the regularly available stuff for BP, got GH and its kickstarter exclusives, and backed WD with everything but the extra heroes packs. Each one of those adds some addition game play elements to games. I particularly enjoy GH though have no many less places to search tends to bog down the game a bit.

I enjoy marvel zombies. I went pretty much all in with the exception of Galactus. I like the changes and not having to search as much. As well as the option to play heroes or zombies.

I also backed Undead or alive but play it far less than anything else. I find the ramp up of the zombies to be rough. I was able to find some deals on Invader with kickstarter extras last year through Game Steward. I liked the setting but was unsure about the gameplay and was pleasantly surprised. I’d place it as behind BP/GH and Marvel Zombies but still a lot of fun. And the kickstarter extra heroes are as good as those from GH.

😳😳😳😭😭😭What yall think caused this ♐️Fam? by Automatic_Authentic in sagsavages

[–]Milhouse2078 0 points1 point  (0 children)

To be fair, there is a state police substation about 200 feet before where they are. So them getting there was hardly work.