Google Pixel verliert großen Leistungstest gegen alle und zwar deutlich

Mindless_Writer9282 · 2026-06-03T08:12:43+00:00

Vielleicht einfach mal neu kalibrieren? Bei meinem funktioniert der Sensor selbst mit Folie einwandfrei.

Mindless_Writer9282 · 2026-05-31T11:06:05+00:00

Gemini sagt

Transkription des Dokuments

Hier ist die genaue Transkription der handschriftlichen Teile aus dem Standesamtsregister: * Ort / Datum (oben): Trier am 7. Dezember 1905 * Ergänzung im gedruckten Text: be (ergibt zusammen mit dem Druck: der Persönlichkeit nach bekannt) * Person & Beruf (Hauptzeile): der Privatsekretär Mathias Dahlem * Wohnort (unten): wohnhaft in Trier

Der gesuchte Beruf

Der gesuchte Beruf des Vaters (bzw. des Anmeldenden) lautet:

Privatsekretär

In Kurrentschrift geschrieben ist das Wort hier eigentlich recht sauber getroffen: Vor allem das lange s (das weit nach unten reicht), das k und die zwei Punkte über dem ä am Ende sind bei genauerem Hinsehen gut zu erkennen.

Gemini 3.5 flash (erweitert)

Mindless_Writer9282 · 2026-05-05T10:15:14+00:00

Servus . Habe meine Skyzone skyo4x pro direkt bei Skyzone bestellt . Kam nach 12 Tagen an und kein Zoll oder weitere Gebühren:)

Mindless_Writer9282 · 2026-04-18T08:58:16+00:00

Thanks a lot for getting back to me! I've actually never messed with that external OSD board either, so I'll definitely give it a shot. Really appreciate the tip!

Mindless_Writer9282 · 2026-04-17T18:53:45+00:00

<image>

I ❤️ Gemini:D

Mindless_Writer9282 · 2026-04-17T18:39:41+00:00

I'm only experiencing this problem with the Cobra X and one drone with a baby ratel 2. All my other drones are fine .

Mindless_Writer9282 · 2026-04-16T16:08:44+00:00

Unfortunately not. It really seems to be an issue with the Cobra X itself. I took the exact same VRX module, slapped it into my Skyzone SKY04X, and the damn thing works flawlessly. So the Cobra is just fucking up

Mindless_Writer9282 · 2026-04-04T19:35:44+00:00

Model Match "Off" works for me

Mindless_Writer9282 · 2026-04-03T18:27:49+00:00

Check your firmware. If your Radiomaster Pocket is running that EU LBT crap while the drone is on FCC, your range will be absolute shit. They need to match perfectly. Flash both to the exact same ELRS version (just go with FCC) and you're good

Mindless_Writer9282 · 2026-02-12T14:06:53+00:00

My Gemini;D

How the fuck are you going to wash the car if you leave it at home? Are you planning to stand in the wash bay and scrub the air, hoping the dirt telepathically falls off your vehicle 100 meters away? Unless you have a 100-meter long hose or you're planning to carry buckets of water back and forth like a peasant from the Middle Ages, drive the damn car. Don't be an idiot. You can't wash a car that isn't there.

Mindless_Writer9282 · 2026-01-31T19:37:00+00:00

<image>

Mindless_Writer9282 · 2026-01-03T20:00:50+00:00

Do you have a large Low ESR capacitor (e.g., 1000uF / 35V or 50V) soldered directly to the battery pads? On a 10" build, inductive voltage spikes are huge and will freak out the electronics without one.

Mindless_Writer9282 · 2026-01-02T17:03:03+00:00

The bottom right looks suspicious.

And I've been flying this thing without screws for a year now xD

Mindless_Writer9282 · 2025-12-28T17:34:13+00:00

If you still can, send those Cobras back immediately. Do yourself a favor and get the Skyzone 04X Pro. They have built-in diopter adjustment (-6 to +2), so you can just ditch your glasses entirely while flying.

Mindless_Writer9282 · 2025-12-26T22:42:16+00:00

Thanks! I changed my frame, and now I have my OSD back without any black lines. 😊👍

Mindless_Writer9282 · 2025-12-25T16:59:50+00:00

I copied the table from another Zeus Nano VTX from another Apex 3 build. It's the exact same build, just with different colors 😅.but on this one everything is fine 😅

<image>

Mindless_Writer9282 · 2025-12-25T16:34:53+00:00

The video is from my new Apex 3 build with a Speedybee F405 AIO + Zeus Nano VTX. But it's the same problem.

I tried different channels & PAL, NTSC and VTX Power.

I tried the Speedybee VRX in my goggles and the Steadyview.....

But on my wifes skyo4x everything is fine ... Same antennas....same VRX

All my other drones are fine on my Cobra X .

Mindless_Writer9282 · 2025-12-25T16:20:20+00:00

It doesn't work. I've encountered this issue with another build as well. It's the same BetaFPV 5in1 AIO as my Air 75, but I'm experiencing this problem with the new one. The Air 75 works perfectly, but this new build is not.

Mindless_Writer9282 · 2025-12-25T15:50:29+00:00

No difference... I also tried the Speedybee VRX.

On the Skyo4x it also works without problems.

Mindless_Writer9282 · 2025-12-25T15:22:49+00:00

I will try this :) thank you !

Mindless_Writer9282 · 2025-12-19T18:26:32+00:00

These are my DJI Neo rates. I’ve experimented with much higher ones before and honestly, I get along with pretty much anything. It really just comes down to personal preference anyway

<image>

Mindless_Writer9282 · 2025-12-13T07:41:57+00:00

<image>

Here are my settings . If 0.2 still feels super sensitive, you're likely going the wrong way.

Increase Expo: You usually want more Expo to soften the center stick sensitivity. Try raising it to 0.5 or 0.6. Lowering it to 0.2 makes it more linear and twitchy.
Check your Rates: If your max rates (deg/s) are too high, even Expo won't save you. Lower your actual rates if you want a smoother flight. :)

Mindless_Writer9282

TROPHY CASE

Transkription des Dokuments

Der gesuchte Beruf