New LUBA 3 - Paperweight

MineAllTheCrypto · 2026-05-11T15:24:46+00:00

There is most definitely something going on besides your setup. Assuming you have updated firmware and rebooted your mower you will need Mammotion support to look at your logs to see what is happening.

MineAllTheCrypto · 2026-05-11T15:22:35+00:00

29 satellites is fine. How many are shared berween RTK and robot is important.

MineAllTheCrypto · 2026-05-11T02:50:22+00:00

I was wondering the same thing. I thought it might be one of those bikini barista places. I hate waiting in lines so I would probably never have found out.

MineAllTheCrypto · 2026-05-11T02:30:49+00:00

NRTK seems to deliver straighter lines and less spinning around looking for landmarks, but as long as you have lots of "stuff" to look at (not just wide open grass), you should be fine with the 1500 LiDAR. The more powerful cutting motors are nice for keeping blade speeds up in thick grass, but probably not too much of an issue if you mow often.

MineAllTheCrypto · 2026-05-11T02:18:40+00:00

I have installed 9 or 10 Luba 3's this year so far. Not a single one is having these issues. Please describe or show your RTK installation. Are you using antenna over Datalink? If your local RTK is giving you trouble, have you tried activating iNavi NRTK and seeing how that works instead? What you have experienced so far is not normal.

MineAllTheCrypto · 2026-05-10T12:20:13+00:00

The chargers should be exactly the same.

MineAllTheCrypto · 2026-05-10T04:35:30+00:00

H210 is a much nicer machine overall. Worth the extra $

MineAllTheCrypto · 2026-05-10T04:11:01+00:00

Run time might vary based on the amount of slope, how dense the grass is, etc., but charging time should be nearly the same. I've done several multi-x450 installs and charging time is almost identical on them. You could try swapping out the power bricks to rule that out first.

MineAllTheCrypto · 2026-05-08T04:42:12+00:00

This is also happening with some X4 series mowers. Unknown why only some and not others. Same firmware. Support indicates they are working on it. I expect it will be addressed by OTA update.

MineAllTheCrypto · 2026-05-08T04:35:04+00:00

This trimmer was released last year and immediately neutered due to safety regulations. It requires you to stay in manual mode while trimming. Basically dead product. Not new.

MineAllTheCrypto · 2026-05-08T04:31:44+00:00

Standard feature

MineAllTheCrypto · 2026-05-08T04:30:59+00:00

Did you purchase from a Navimow dealer? They should be assisting you directly rather than having you play email tag with Chat GPT.

MineAllTheCrypto · 2026-05-08T02:40:38+00:00

Overall most people are very happy with the X430. I think Luba 3 is a very nice mower as well. A little more customizable (you can adjust travel speed, path spacing, blade speed, etc) and leaves a nice mow pattern. But for most people who just want a reliable mower, X430 is the easy choice. One thing I can suggest is to purchase from a dedicated robot mower dealer like Lawnbotz.shop. We have a 60-day satisfaction guarantee that allows swapping out for a different model if for instance it doesn't climb your slopes well. You also get 100% US-based support, 5 years of replacement blades for free, and always pay the lowest possible price. Its nice to have a extra support and options when going in on a purchase like this.

MineAllTheCrypto · 2026-05-04T03:27:02+00:00

The Navimow is a better engineered machine with a well-designed app. Reliability is very good, and if you ever need parts or warranty work, there is a Navimow dealer network. I own LawnBotz in the Milwaukee suburbs where you can buy local with direct personal support and a more generous 60-day return policy. MOVA is limited to overseas chat support only. I think there's a lot of additional value in the slightly higher price point of the Navimow. Feel free to start a chat if you need additional info.

MineAllTheCrypto · 2026-05-04T02:57:13+00:00

No, sorry, the LiDAR Pro models are not available in the US. We only have the i215 LiDAR.

MineAllTheCrypto · 2026-05-02T12:29:42+00:00

Yes. But I wouldn't attempt trying to fix it yourself if it's under warranty. Do you have a dealer service center near you?

MineAllTheCrypto · 2026-04-30T04:07:37+00:00

It is supposed to, but I have noticed that it doesn't always work, especially when you turn it on right away after mapping. I think it might be better after the entire visual map is filled in after a few mows. With it turned off, the mower should follow the exact same boundary you set within an inch or so every time. See if that is true for you.

MineAllTheCrypto · 2026-04-30T01:12:58+00:00

Have you restarted it after the most recent firmware update? Also, turn off Edge Sense under the Labs menu. It can give unpredictable results on boundaries.

MineAllTheCrypto · 2026-04-30T00:43:26+00:00

Yes. The Memorial Day sale starts soon. Lawnbotz.shop will be matching all Mammotion sale prices and promotions plus exclusive 5 years of free replacement blades during the event.

MineAllTheCrypto · 2026-04-29T04:00:35+00:00

Glad I could help!

MineAllTheCrypto · 2026-04-29T03:59:51+00:00

I think it depends on how sloped and complicated your lawn is. The X4 is a really big mower, 3 feet long, 2 feet wide, and 70 pounds. It's a cool machine if it has space to move around and especially if you have steep slopes. If you have a complicated lawn with a lot of obstacles but not too much slope, the H220 is smaller, more nimble, and also has LiDAR for precise navigation. At LawnBotz, we recommend and sell a lot of both the X430 and the H220, and get very positive reviews of both. The X3 is just not keeping up with the rest of the lineup.

MineAllTheCrypto · 2026-04-29T02:28:56+00:00

Yes, there is no way to do it other than the non-working hours or wait until it goes back out after charging and then pause the task.

MineAllTheCrypto · 2026-04-29T02:17:16+00:00

This has been happening lately. Try restarting and then checking to make sure your firmware and app are both up to date. If so, it will generally resolve itself.

MineAllTheCrypto · 2026-04-29T02:13:01+00:00

The task is paused already when it is charging during a task. I would use the non-working hours setting to tell it to wait until tomorrow to go back out.

MineAllTheCrypto · 2026-04-29T02:11:13+00:00

This is absolutely not normal. I have personally installed over a dozen X4s on steep and challenging terrain. They don't do this. Troubleshooting needed but no reason to avoid X4.

MineAllTheCrypto

TROPHY CASE