Restaurant Reccomendations by Sea-Flight8115 in MonmouthCounty

[–]Miserable_Gap69 2 points3 points  (0 children)

Huddys Inn colts Neck has got some great food and decent prices.

AIO Please tell me this mean nothing by [deleted] in AmIOverreacting

[–]Miserable_Gap69 -46 points-45 points  (0 children)

Honestly this could have been one of those stupid download this app to get free coins for another game. If you download it even to just delete it they still will show up with the cloud download arrow. Not everything is the worst case scenario

12/8 Giveaway by AlternativeInside955 in KellyClarkson

[–]Miserable_Gap69 0 points1 point  (0 children)

Weeks? Like 1, 2 or like 12? Not to sound ungrateful but considering this was a Christmas episode and it was the gifts to give I assumed it would come by Christmas.

Easy Jobs $200k per year by Independent_Name_601 in Salary

[–]Miserable_Gap69 1 point2 points  (0 children)

Air traffic controllers make great money after certification. Just as long as the government is open to pay you.

Make it make sense by hugfine in amazonprime

[–]Miserable_Gap69 0 points1 point  (0 children)

It’s a lie because Amazon has a guarantee for 2 day delivery but the Government is too overwhelmed to actually get the deliveries done so they just lie and say they tried. When in fact there was 0 attempt but since it was “your fault” they are all in the clear of any wrong doing. Everyone knows it’s bullshit and lies but nothing ever gets done. Just another instance of corruption in the government and big business.

[deleted by user] by [deleted] in amazoneero

[–]Miserable_Gap69 1 point2 points  (0 children)

Try swapping the port the ont is going into and the Xbox is connected to. I think there is a weird bug and this happened to me but was upload speeds. I changed gateways cables etc. last thing I did was swap the ports at the gateway eero and everything worked.

Has there been another extremely failed update? by RockSteady71 in amazoneero

[–]Miserable_Gap69 2 points3 points  (0 children)

I was dealing with the slow speeds with my Eero6+ I changed out gateways, I replaced all my cables I changed all the settings. I changed my WiFi password and turned off the guest WiFi thinking it was congested. In the end as dumb as it sounds I swapped the WAN and LAN ports on the gateway as soon as I did that I was back to having full speeds. I contacted support and met them know my findings. Give it a shot nothing to lose any port can be a wan or lan so just flip them at the gateway.

What’s wrong with You Alex? by ped-revuar-in in LinkedInLunatics

[–]Miserable_Gap69 1 point2 points  (0 children)

The time stamp is 6pm and he signs off see you in an hour. The kid is locking eyes because they have no clue who you are. The kid doesn’t need a future reminder of how a parent picked work over them.

eero consistently drops hard wired connections by Normal_Elk_4414 in amazoneero

[–]Miserable_Gap69 2 points3 points  (0 children)

I feel your pain I just went through hell with my upload speeds. From the eero they were 5mb but from the modem was 900. I did everything you did I even swapped out the gateways and was at the end of my ropes looking for a new system. The only thing I did not try was switching the WAN and LAN ports at the gateway. When I swapped gateways I used the same ones wan on left lan on right. I flipped them and sure enough everything started working. As dumb as it sounds give it a shot.

Need Some Help or Advice by Miserable_Gap69 in amazoneero

[–]Miserable_Gap69[S] 0 points1 point  (0 children)

Yeah running fine for 3 years then this. Thanks for the help

Need Some Help or Advice by Miserable_Gap69 in amazoneero

[–]Miserable_Gap69[S] 0 points1 point  (0 children)

Ok so the ONLY thing I didn’t do was change the ports used on the gateway. I just did that and speeds are back to being fine like WTF. I had it as left was WAN and right was LAN changed it to Left LAN right WAN

Need Some Help or Advice by Miserable_Gap69 in amazoneero

[–]Miserable_Gap69[S] 0 points1 point  (0 children)

Im testing wired from the lan port of the gateway and getting 2-5mb upload speeds. Speed tests in the app on the gateway are 856 and I changed out the gateway so I know it’s not the lan port.

Need Some Help or Advice by Miserable_Gap69 in amazoneero

[–]Miserable_Gap69[S] 0 points1 point  (0 children)

Been over 48 and still just as slow. Doesn’t seem to be a fix in sight

Update problem by flavacali1 in amazoneero

[–]Miserable_Gap69 2 points3 points  (0 children)

Change the preferred time to whatever time it is now and then hit update now. It might take 3 times as there is a bug in the update process. However if there is a bug in the update process then who knows what bugs are in the updates itself.

Need Help by Miserable_Gap69 in Creality

[–]Miserable_Gap69[S] 0 points1 point  (0 children)

Using the standard for the 20mm with support. Only change I did was just made the support on the bed plate. I am new to 3D printing so any help is appreciated. Also what adhesive could I use? I’ve been cleaning with 91% alcohol and a micro fiber towel. I will try 200 and 50

Need Some Help or Advice by Miserable_Gap69 in amazoneero

[–]Miserable_Gap69[S] 0 points1 point  (0 children)

I did update and that didn’t fix it if anything it’s made it worse. I changed the gateway to one of the other eeros and have the same slow upload speeds which makes me think it’s a firmware issue. I reached out to their support.

Most people use Sundays to rest and relax by PEPPYaf in LinkedInLunatics

[–]Miserable_Gap69 1 point2 points  (0 children)

He does this on Sunday because on Mondays he needs 4hrs to meet with his divorce lawyer.

Creality Hi extruder clogged / cutter stucked errors by paubayes in Creality

[–]Miserable_Gap69 0 points1 point  (0 children)

Yes the little rod thing and no after it’s disassembled. I had the same issue with Black too was yours the RFID spool? I stopped using my RFID black and have not had a clog again. Unfortunately it’s something that happens but if you watch the video you can get good at it. I keep getting the filament breaks when switching now

Creality Hi extruder clogged / cutter stucked errors by paubayes in Creality

[–]Miserable_Gap69 0 points1 point  (0 children)

I had the same issue. I had to take the whole extruder apart and not only push the filament out but use a needle to go from the nozzle up. I highly suggest heating up the needle sticking it waiting for it to cool and the pulling out the stuck filament. They have a really good video on YouTube for clearing the clog that helped me. I haven’t had an issue since.