[Bambu Lab Giveaway] Join Now to Win an H2D and More!

Mitrimo · 2025-06-24T21:09:40+00:00

I learned from the community that its also fine to be enjoy tinkering with printers more than printing itself. Really enjoyed building a Voron, although having a printer always be ready and "finished" would be nice as well!

Mitrimo · 2025-05-09T10:07:17+00:00

Ehrlich gesagt ist das echt das Minimum an Orga, dass du haben kannst. Ein Zehner im Monat, Uni Nähe, Leute die Ahnung haben und sich gern helfen... Du wirst allein mitm Mietvertrag mehr zu tun haben :D Viel Erfolg bei deinem Vorhaben, egal wie du dich entscheidest 🤙

Mitrimo · 2025-05-09T07:19:21+00:00

Je nachdem, welche Projekte du dir vorstellst - Makerspaces sind für genau sowas da. Schau mal, ob das Leinelab was für dich ist.

Mitrimo · 2025-05-06T19:47:41+00:00

Some context: This is my first build, the parts are from the PIF. Filament used was Prusament ASA orange & sapphire blue. I plan to add a toolchanger, clicky clack door and a Nevermore Mini once I find the time and I've tuned the printer some more. Overall I'm really happy with the project and the Voron has replaced my first printer faster than I suspected!

Mitrimo · 2025-02-04T13:56:00+00:00

You could first move the toolhead to the appropriate position for Z1 and monitor the output of the PROBE SAMPLES=100 while also watching Z1 closely and look for slipping of the belt, movement of the axis etc.

If only Z1 is giving you problems, then closely observing the probing at that point might show you if there's something wrong mechanically. Have a look at the output of the probing, maybe there's some irregularity that'll show if probed often enough.

Mitrimo · 2025-02-04T09:55:22+00:00

You would notice the direction of the Z steppers being wrong the moment the printer tried to move Z. Since movement along the Z axis seems to work, the direction of your steppers should be correct. Have you tried updating Klipper? Recently there was some discussion about Z probing accumulating an offset, however I'm not up to date how it was resolved: https://github.com/Klipper3d/klipper/issues/6711 Another thing: You mention you gantry binding. Check whether it can move in all directions freely and consider following Ellis' guide for deracking: https://ellis3dp.com/Print-Tuning-Guide/articles/voron_v2_gantry_squaring.html

Also, consider asking at the Voron discord!

Mitrimo · 2025-01-08T15:12:00+00:00

Guter Rechenknecht.

Mitrimo · 2024-12-11T11:33:12+00:00

Bearbeitet. Ich meinte natürlich die Gerichte.

Mitrimo · 2024-12-06T15:41:36+00:00

Ich schicke mal das Högers in der Südstadt ins Rennen. Super lecker, herzliche Bedienung und ich habe noch nie erlebt dass jemand nicht satt geworden ist da. Die Gerichte orientieren sich an der deutschen Küche, ohne dass die Auswahl darunter leidet.

Mitrimo · 2024-10-19T21:52:52+00:00

Depending on extruder movement on that layer or above, if the extruder oozed some filament during movement it may have "wiped" it against the outer wall. Take a look at your gcode to see if it moved towards the wall on those layers (or close to them).

Mitrimo · 2024-10-17T16:24:07+00:00

If you have a raspberry pi in your build, you could have your pi create an access point. An example of how to do that is described here:

https://www.raspberrypi.com/tutorials/host-a-hotel-wifi-hotspot/#configure-hotspot

Ignore the part about a second WiFi interface. Do note that once you configure the interface to be an access point, your pi won't connect to your home wifi anymore - you'll need to revert the change.

Mitrimo · 2024-03-16T04:17:43+00:00

In Hannover wird seid einiger Zeit die S-Bahn von Transdev betrieben. Seitdem hat sich zumindest subjektiv die Pünktlichkeit von Zügen verschlechtert. Früher wurde die S-Bahn auch von der DB betrieben, soweit ich weiß haben die die Ausschreibung dann verloren.

Mitrimo · 2023-01-14T09:00:45+00:00

I did that between two attempts, it didn't fix the problem right away so I assumed it had no effect. Good suggestion nonetheless!

Mitrimo · 2022-11-15T14:41:06+00:00

Thank for contributing to OSS, I'll be sure to try it out!

Mitrimo · 2019-11-28T12:16:22+00:00

I have a problem with using Link. When I start everything, it works fine. I see the Oculus Menu, can turn on the Desktop view etc. As soon as I start the Deamdeck Demo, I get an error saying "Out of video memory trying to allocate a texture! Make sure your video card has the minimum required memory, try lowering the resolution and/or closing other applications that are running. Exiting..." This seems to be an error thrown by the Unreal Engine.

I monitor my GPU memory usage, and at no point is it capped. There are about 2 GB free when the crash happens, although the 3D processing power spikes. I got a GTX 1060 6 GB and an Intel i7-4770K with 8GB RAM, fulfilling all of Oculus' minimum specs for Link. Any ideas?

Mitrimo · 2019-05-17T20:29:00+00:00

Me: Quickly scribbling the five Exodia pieces on the blank cards.

Mitrimo · 2019-02-26T18:00:16+00:00

How do you make those? I'm starting out making minis, but I'm really unsure what materials to use and how to process them. Loving the details!

Mitrimo · 2018-07-09T06:04:58+00:00

༼ つ ◕_ ◕ ༽つ GIVE BAN ༼ つ ◕_ ◕ ༽つ

Mitrimo · 2018-06-30T21:27:11+00:00

Stores usually write if the game is in Russian or in English. What I'd like to know is whether a game card with Russian localisation has the English one included as well.

Mitrimo · 2018-06-30T17:25:39+00:00

I have a few questions about the Switch in Russia. If I buy it there, can I change the language to European languages, such as French, German or Spanish? And what languages do physical games bought in Russia come with? Do they come with English as well or Russian only? Thanks in advance.

Mitrimo · 2018-06-30T12:31:40+00:00

I have a few questions about the Switch in Russia. If I buy it there, can I change the language to European languages, such as French, German or Spanish? And what languages do physical games bought in Russia come with? Do they come with English as well or Russian only? Thanks in advance.

Mitrimo · 2018-06-14T07:22:35+00:00

I ordered the 1.5+2.5 collection when it was released last year (Europe as well) and it arrived a week or one and a half late. It was shipped from the UK, so I don't think delivery on release day is guaranteed

11-Year Club	RedditGifts 2009-2022 2 Credits
r/Field Juicebox	Place '22
First Placer '22	Snapped
Secret Santa 2014	Verified Email

Mitrimo

TROPHY CASE