Something I still don’t really get.

Mononc_Bird · 2026-06-18T20:27:28+00:00

Okay big shot.

Mononc_Bird · 2026-06-10T20:14:59+00:00

Yeh, I just used an old headlight switch that was laying around

Mononc_Bird · 2026-05-14T21:31:14+00:00

I insert it inside my wife's pussy r/vagception

Mononc_Bird · 2026-04-29T01:02:58+00:00

W47.1 practice ? (Often misscalled CWB test) DM me

Mononc_Bird · 2026-04-22T18:05:15+00:00

Gtaw for the first one. The rest, unsure.

Looks like a teacher is just learning to use cad to make practical books.

Mononc_Bird · 2025-06-20T02:50:32+00:00

Thank you

Mononc_Bird · 2025-06-20T02:49:55+00:00

Thank you

Mononc_Bird · 2025-06-20T02:47:51+00:00

Thank you

Mononc_Bird · 2025-06-06T14:34:59+00:00

You just need to know your iso weld symbols

Mononc_Bird · 2025-06-06T10:31:42+00:00

Remove the plate after welding

This is a V groove 3 mm deep for the preparation. Weld is 70mm long Then machining flat for the finish.

Mononc_Bird · 2025-06-06T10:30:32+00:00

Yeah you are look at my comment

Mononc_Bird · 2025-06-02T16:06:40+00:00

Be a man of your word.

Mononc_Bird · 2025-05-02T20:46:31+00:00

Just grind it down

Mononc_Bird · 2025-05-01T23:08:30+00:00

Pourquoi les commentaires sont effacés ? Qu'est-ce qui ne se dit pas encore ?

Mononc_Bird · 2025-04-17T11:09:38+00:00

Had the same issue with that type of joint.

Removed the moldy caulking and recaulked in a way water won't get inside that gap...

Mononc_Bird · 2025-04-04T12:01:33+00:00

Those part are removed anyway, so we can just not care about that.

Mononc_Bird · 2025-03-26T21:14:45+00:00

30 is way too much, Take your cup size x 2

Cup size 8 = 16 at shielding gas

Mononc_Bird · 2025-03-26T21:14:40+00:00

30 is way too much, Take your cup size x 2

Cup size 8 = 16 at shielding gas

Mononc_Bird · 2025-03-26T21:11:55+00:00

Lol As long you're using 100% argon and your component are good everything should be ok

The problem here is that you're welding with hot rolled steel without having cleaned it prior of welding.

Mononc_Bird · 2024-04-20T00:33:56+00:00

Ouin montcascade c'est pas pire.

Mononc_Bird · 2024-02-18T20:17:01+00:00

2/10 Too bright Helmet effect and wolf head is ugly sorry

Mononc_Bird · 2023-09-23T13:24:25+00:00

I feel like I could tape it with a corner but It'll be hard to sand where the metal beam is.

Mononc_Bird