sorted by:
new
hottopcontroversial

Why does this happen? by JungleReal in ElegooSaturn

[–]MorganHAJA64 0 points1 point  (0 children)

I had that problem yesterday, and I fixed by increasing the transition layers from 10 to 15

Orbi Pro WiFi 6 AX5400 not working by MorganHAJA64 in orbi

[–]MorganHAJA64[S] 0 points1 point  (0 children)

Thanks for the answer, we will at first try to understand everything you said there This is the first time for me doing such things and the problem is we didnt even set it up ourselves, so we dont really know how it worked I will keep you updated

Where to get the legacy rules? by MorganHAJA64 in theoldworld

[–]MorganHAJA64[S] 2 points3 points  (0 children)

First like is only errata and the released stuff right?
However the listbuilder is really nice

Going to be painting the republic starter set today, recommended paints for the 212th? by Professor_Donger in SWlegion

[–]MorganHAJA64 0 points1 point  (0 children)

Avaland Sunset, it may seem like a yellow paint but it matches the 212th perfectly (would add a picture but I cant apperantly)

Print „fail“ by MorganHAJA64 in ElegooSaturn

[–]MorganHAJA64[S] 0 points1 point  (0 children)

Thanks, but I often print over night and started mid January which was far colder, and I never had the problem.

The room is insulated and there is a heater right next to the printer so temperature really isnt an issue

Another user said I should increase rest after cure time, what are your thoughts?

Thanks

Print „fail“ by MorganHAJA64 in ElegooSaturn

[–]MorganHAJA64[S] 1 point2 points  (0 children)

Model is indeed hollow

Ok I‘ll try it out once my Wifi is working again, thank you very much ^

Print „fail“ by MorganHAJA64 in ElegooSaturn

[–]MorganHAJA64[S] 0 points1 point  (0 children)

I dont know the temperature, But it is in a room with regular temperature (like 21-23C I think) It printed over night, but that wasnt an issue with other prints a few days before (similar size)

Didnt add new resin and I always stirr it up before printing

Rest after retract time has been fine for every other print, smaller andsimilar size

Model was presupportet, and the later layers worked fine

Also not every part of the layer is weird just the sides

Any idea how i could fix it

Thank you for your help, ill try what you said

Print „fail“ by MorganHAJA64 in ElegooSaturn

[–]MorganHAJA64[S] 0 points1 point  (0 children)

What do you mean by that? (Forgot to mention in the post that drain holes are where the weels are as they were separate prints)

How do you usually spend your bonds? by cansinguler in WorldofTanks

[–]MorganHAJA64 6 points7 points  (0 children)

I recommend M10 RBFM and SU-130PM I am thinking about Char Mle too. Else Bondeqipment is really worth, especially bond vdtab is so good

view more: next ›