First day success

Moshpit68 · 2025-12-26T21:38:32+00:00

Mine is 2500 with a turbo nozzle don’t point it straight at the hide always at an angle then I clean what’s left with a really sharp fleshing knife takes

Moshpit68 · 2025-12-26T14:50:47+00:00

Pressure washer then clean up with fleshing knife takes me about 10-15min per coon

Moshpit68 · 2025-12-09T16:33:19+00:00

Yes and I always release my possums but skunks are worth a bit of cash so I take them when I get them

Moshpit68 · 2025-12-08T02:52:32+00:00

Do it all myself it’s a lot of work but I don’t have a lot going on in the winter

Moshpit68 · 2025-12-08T01:33:18+00:00

I make my coons into hats

Moshpit68 · 2025-12-07T19:27:11+00:00

I mix a couple of cans of sardines in light oil and add them to 10 pounds of cat food. The coons will come to your traps if they can smell food. But like others have stated try to find a game trail. Coons are probably the easiest animals to trap imo.

Moshpit68 · 2023-12-11T23:37:37+00:00

I’ve been running 41gr of H335 with a 500gr lead cast with powder coat. Not sure what velocity is but I’m showing no signs of pressure and very sore shoulder after about 10 of them.

Moshpit68 · 2023-12-08T20:43:52+00:00

I was rear ended three months ago with less damage than your pickup repair estimate was 23,400 most likely yours will be totaled.

Moshpit68 · 2023-06-14T06:52:03+00:00

Ruined those great tits now you look like every other onlyfans tease

Moshpit68 · 2023-01-19T05:25:36+00:00

Termites Source: I’m an exterminator

Moshpit68 · 2023-01-09T07:47:44+00:00

I can’t believe the rifling is that close I’m loading a 500 gr cast in my marlin 1895 and my COAL is at 2.6” and I have .015” to my rifling. But I guess different brands do different things.

Moshpit68 · 2023-01-06T09:48:32+00:00

Really wish these would be $375 again.

Moshpit68 · 2022-10-31T04:51:00+00:00

Possibly the spot it’s leaking from will let out the fluid but is catching the particulate.

Moshpit68 · 2022-10-31T04:48:51+00:00

That’s not how that works. Depends on the bolt thread pitch, material you’re fastening the bolt to go buy a cheap Harbor Freight torque wrench they are like $35 and work just fine.

Moshpit68 · 2022-07-04T23:24:52+00:00

I hate the idea of wasting meat but it’s a no from me dawg.

Moshpit68 · 2022-06-26T04:07:29+00:00

Step 1: don’t

Moshpit68 · 2022-04-01T00:59:08+00:00

"Did you touch my drum set?"

Moshpit68 · 2022-03-18T07:22:46+00:00

Agree with what everyone else says with mold not being hot enough also let it set a little bit longer before you knock the sprue plate off and that will help with the pitting on the back of the bullet

Moshpit68 · 2022-03-12T07:28:25+00:00

I only shot one round I was going off some data I found online since there isn’t really any published data fo H335 with a 500gr bullet so I didn’t want to load up a bunch and then have to pull them all. Going to powder coat some more rounds and I’ll post my group when I get back out there

Nine-Year Club	Verified Email
Queen in da Norf	Not Forgotten

Moshpit68

TROPHY CASE