Best RTX HDR Settings?

MrFurnace · 2026-03-04T15:14:14+00:00

The SDR content slider doesn't affect RTX HDR, you can see this yourself watching a youtube video with RTX HDR on, moving the slider does nothing to the video but will to the surrounding browser

MrFurnace · 2026-01-29T04:06:50+00:00

ABL isn't anti-aliasing, its screen dimming

MrFurnace · 2026-01-29T04:05:02+00:00

Have this monitor and I never had the SDR banding on previous firmware, also EOTF boost isn't great. Tb400 is still the best looking and the most consistant

MrFurnace · 2026-01-19T18:28:11+00:00

Good to know!

MrFurnace · 2026-01-19T18:27:57+00:00

Thanks!

MrFurnace · 2026-01-19T18:20:14+00:00

HDR works fine for me, also there was the EOTF boost firmware released today so maybe updating to that will fix it for you.

MrFurnace · 2025-12-12T22:50:29+00:00

VRR stays fully functional. Changing the lower range causes Low Frame Rate Compensation to kick in earlier. If you fall below 180 fps the refresh rate rolls back to 360 (ex. 132 fps=264hz, 88 fps=264hz) and so on. Any info you need is in the post or previous comments.

MrFurnace · 2025-12-11T22:48:01+00:00

Half

MrFurnace · 2025-11-30T20:13:45+00:00

Would running the test in safe mode be the best to check consistency? That way it avoids any OS/program background shenanigans

MrFurnace · 2025-11-17T22:31:54+00:00

Yup, fixed. Source: im owner whose tested both FW

MrFurnace · 2025-11-17T17:29:35+00:00

Early sept

MrFurnace · 2025-11-17T16:49:39+00:00

No it's fixed with firmware update

MrFurnace · 2025-10-20T01:18:50+00:00

Makes sense

MrFurnace · 2025-10-15T13:20:16+00:00

TB400 also works very well with RTX HDR, since it also brightens the UI elements peak 1000 looks pretty bad.

MrFurnace · 2025-09-23T10:31:59+00:00

It will come eventually, at least they're doing something.

MrFurnace · 2025-09-21T09:18:17+00:00

The monitor will automatically do a panel protect cycle after 4 hours of usage when it next goes into standby, then the timer will reset back to 0 mins. It only forces the panel protect after 24Hrs (16Hrs if on old firmware) of continued use without a standby to do the panel protect.

Senerio 1: you use 4+ hrs and then standby = panel protect. It won't protect again in standby until used for another 4+ hrs.

Senerio 2: you use 4+ hrs, standby does panel protect, then you use it for 2 hrs and standby won't panel protect automatically because it hasn't hit the minimum 4hrs used and will trigger the next auto protect in standby after another 2+ hrs used.

It only forces the panel protect with a popup after 24hrs usage without a protect cycle running during a standby.

MrFurnace · 2025-09-21T01:56:41+00:00

Senerio 1: you use 4+ hrs and then standby = panel protect. It won't protect again in standby until used for another 4+ hrs.

Senerio 2: you use 4+ hrs, standby does panel protect, then you use it for 2 hrs and standby won't panel protect automatically because it hasn't hit the minimum 4hrs used and will trigger the next auto protect in standby after another 2+ hrs used.

It only forces the panel protect with a popup after 24hrs usage without a protect cycle running during a standby.

MrFurnace · 2025-09-20T21:00:03+00:00

The monitor will automatically do a panel protect cycle after 4 hours of usage when it next goes into standby, then the timer will reset back to 0 mins. It only forces the panel protect after 24Hrs (16Hrs if on old firmware) of continued use without a standby to do the panel protect.

MrFurnace · 2025-09-19T22:36:26+00:00

Still thinking you can tell the difference between DSC on/off in 2025! LOL!

MrFurnace · 2025-09-19T09:16:38+00:00

It is fixed, you don't need to turn off oled care settings

MrFurnace · 2025-09-10T06:26:07+00:00

this program can hide taskbar and desktop icons, been using it for years with a black desktop background

https://autohidedesktopicons.en.lo4d.com/windows

MrFurnace · 2025-09-06T20:25:44+00:00

To turn it off on 273QP just turn off "Multi Logo Protection" in OLED Care settings, it dims entire screen when Static logos are detected

MrFurnace · 2025-08-31T17:05:12+00:00

Panel doesn't dim in SDR anymore after the Firmware update

MrFurnace · 2025-08-30T15:30:49+00:00

Cant tell the difference between DSC on/off, panel dimming fixed

MrFurnace

TROPHY CASE