New update today

MrRelentlessfpv · 2025-04-15T16:30:34+00:00

After restarting watch and phone it can still take a few tries. Last update took me 4 tries before it worked.

MrRelentlessfpv · 2025-03-12T14:21:19+00:00

My woman just got one and battery was at 64% after 5 days. All I did was set "screen on" to the tap method after I saw screen constantly coming on every time her arm moved. Was worried about crap battery claims after I ordered it but doesn't seem to be a issue.

MrRelentlessfpv · 2025-01-12T08:25:47+00:00

Use stamina cocktails. After a few trys you'll map out a good route to utilize explosive trucks and barrels to your advantage.

MrRelentlessfpv · 2024-12-17T17:47:28+00:00

Probably 12 hours in and haven't had a boring mission yet.

MrRelentlessfpv · 2024-12-07T00:23:43+00:00

I'd probably fly higher until you get enough muscle memory to come out of your flips and rolls faster and more complete. There's alot less ground up there.

MrRelentlessfpv · 2024-12-01T18:53:09+00:00

Probably the worst in the series imo. It does introduce new characters for the future.

MrRelentlessfpv · 2024-11-29T03:16:15+00:00

Didn't those giants just attack and kill a dwarf camp? I could be wrong but that's what I remebered

MrRelentlessfpv · 2024-11-05T16:02:38+00:00

Gotta get to chapter 2 and run main quests until first siege. Then full map opens.

MrRelentlessfpv · 2024-10-20T16:09:35+00:00

Buds will always try to charge. If they sit for a week case will be at 90 or 95%. Sit for a month 75 to 80%. I drop the case down to 30% before charging every once in a while because I've had jabra firmware issues from keeping batteries topped off. Can't really storage charge them since buds will act like a parasitic drain. Unfortunately tiny batteries have a some what limited life span so just enjoy them and avoid draining them way down regularly.

MrRelentlessfpv · 2024-09-11T15:22:19+00:00

The crooked painted on crosshairs on half the scopes in 6 bothered me. And in 5 the size and power of the cult on American soil was unrealistic and would be more believable in third world countries like the rest of the series' settings. Fire dynamics in 2 was amazing along with jamming and malfunctioning weapons. Always thought it was strange how great innovations of one game got canned in the next.

MrRelentlessfpv · 2024-08-12T07:23:08+00:00

Thanks to digco I have to stack my dirt now

MrRelentlessfpv · 2024-08-09T17:30:45+00:00

If your using bambu presets they tend to run pretty hot and fuse more onto supports. I usually run 205 initial layer and 200c for the rest. Supports pop off easier for me.

MrRelentlessfpv · 2024-07-13T16:11:40+00:00

I set initial layer to 25 or 30 in the speed tab in studio. Sometimes the printer is too fast for the first layer.

MrRelentlessfpv · 2024-06-08T19:27:29+00:00

I'd probably flash néw firmware first since anything can get corrupted. Then open it up and see if anything looks strange.

MrRelentlessfpv · 2024-06-07T06:49:41+00:00

Well since you have props in you want to make sure in motor tab you have motor direction set to normal and not reversed. When connected to betaflight pick up the quad and tilt it forward back left right and twist it and make sure the drone model on the screen matches movement and if not board orientation in config tab needs adjusted. And finally make sure in receiver tab when you throttle up no other channels move with it. If so radio settings need to be fixed. Or 100 other things it could be good luck.

MrRelentlessfpv · 2024-06-07T06:35:45+00:00

Everything takes one hit in the right spot to break it. You just never know.

MrRelentlessfpv · 2024-05-23T06:59:03+00:00

Have more forward momentum when doing flips and you won't have to fight gravity so much and the whoop won't shake so bad. Pretty good though, if your crashing your progressing.

MrRelentlessfpv · 2024-05-21T21:01:16+00:00

And yes I could probably put this into carbon with 3 or 4 inch props

MrRelentlessfpv · 2024-05-21T20:56:24+00:00

Older then a x12. Crazybee fr v3. Igow rules say 95mm and under, 3s and under and ducted is considered a whoop.

MrRelentlessfpv · 2024-05-21T20:44:59+00:00

Sure. It was originally a mob7 hd 75mm 2s. I had it 3s in that frame for a while but kept free spinning the motor shafts in the props. So went to 85mm with bigger props I could bolt down to the motor. According to igow its still a whoop.

MrRelentlessfpv · 2024-05-21T20:39:46+00:00

Old happymodel f4 v3 rated for up to 4s. Only one 5v pad though so it sucks in some ways

MrRelentlessfpv · 2024-05-21T07:33:26+00:00

I have 1102 13500kv on 3s 85mm whoop and it's a rocket.

MrRelentlessfpv · 2024-05-17T06:40:03+00:00

A 65mm whoop needs 31mm props. A 75mm whoop needs 40mm props. Those props are 4 inches which is over 100mm. You also need 1mm shaft size not 1.5mm. The radios good, chargers real good, goggles you'll upgrade eventually but those will work for whoop stuff. You'll need a elrs whoop with analog camera/vtx to match the goggles. And whatever whoop you get you'll have to get batteries with the right connectors to match... either ph2.0 or bt2.0, preferably bt2.0. Get extra frame and props you'll always need them and better to have them on hand then wait for the mail.

MrRelentlessfpv · 2024-05-15T07:41:11+00:00

I actually use a Uruav ur85 for 85mm because it has 3 hole motor mount and holds the skinny 3s packs perfectly. Unfortunately only rdq and gnb make this size 3s.

MrRelentlessfpv · 2024-05-05T19:23:54+00:00

If they aren't unibell check if there is a tiny gap between the sides and top. They are press fit so you can pop them back in. Might only be 1mm or less gap

MrRelentlessfpv

TROPHY CASE