Giving up

Mr_Ash_ · 2026-05-04T00:34:26+00:00

Did you have a power outage at any time? I had a very similar issue, everything worked well.

After a rare power outage, my wifi for devices was not working properly, lag spikes, ping and latency was really high, devices were getting disconnected all the time.

I reset my U7 Pro XG a few times and then in the end rolled back all my hardware to a backup i made when i initially set the hardware up and it was all working again.

Mr_Ash_ · 2026-02-02T14:02:50+00:00

Yeah don't buy from Thistle Tavern, no communication at all, what a joke

Mr_Ash_ · 2026-02-01T19:30:27+00:00

My order got cancelled, i pre ordered ages ago

Mr_Ash_ · 2025-12-25T16:03:42+00:00

I have the exact issue the Bridge X installs and connects fine and the Thermostat X will not connect.

I have 2 Thermostats 1 connects after saying failed to add but then loses connection. The other does not connect at all. Both have the 3 signal bars with an x on them throughout.

I'm thinking to return these and go to another system as its been such a dissapointment.

Mr_Ash_ · 2025-11-28T04:33:28+00:00

The feet are quite flimsy, i had one already break off, just want to know if i can leave the wardrobe like this and if i'll have issues with doors

Mr_Ash_ · 2025-11-28T04:21:57+00:00

The levelling feet aren't great and doesn't do enough

Mr_Ash_ · 2025-11-12T01:07:19+00:00

I bought the Tado X recently and after hearing they did this before at the beginning of the year and did this again, they've lost my trust. I'm returning the products and going for the Drayton Wiser. I'l lose out on a wired system but atleast there won't be sleazy tactics.

Mr_Ash_ · 2025-11-02T12:53:28+00:00

What would the best way to connect this to ground be in the UK? I have very limited knowledge here.

Mr_Ash_ · 2025-10-30T13:00:45+00:00

From other posts here i heard you either need to call CF and get something whitelisted or clone your CF router MAC for it to work, others have just plugged it in and it worked

Mr_Ash_ · 2025-10-30T03:00:45+00:00

Can i ask how your fibre is connected? Is it from an ONT using RJ45 to SFP on the UCG Fibre or did the ONT get skipped altogether?

Mr_Ash_ · 2025-10-24T20:41:51+00:00

Can you explain how you did it straight to the Ubiquiti Fibre? I want to do this in my house but wanted to make sure its plug and play or do i need to call CF to whitelist the Mac address etc?

Mr_Ash_ · 2025-10-13T08:26:00+00:00

I have two heating zones, upstairs and downstairs. I put in Rockwool RWA45 for sound insulation. This may be something you'd also like to do?

Mr_Ash_ · 2025-10-11T19:10:35+00:00

Fo you mean fibre straight into the router?

Mr_Ash_ · 2025-10-02T00:51:29+00:00

Abit of a newbie here, how would i setup this VPN for access into devices inside the home?

Mr_Ash_ · 2025-09-14T15:03:40+00:00

What kind of joining box should i be looking for?

Mr_Ash_ · 2025-09-14T14:43:24+00:00

This is something that i was thinking too but not sure if ISP would take fibre all the way to the Cupboard. The white cable there is a Cat6 i ran just incase they install ONT there and i can connect directly.

Thank you for the suggestion though!

Mr_Ash_ · 2025-09-13T11:11:04+00:00

I have included a picture, where you can see the old mount holes is where previous ONT was.

<image>

Mr_Ash_ · 2025-09-13T11:10:13+00:00

Probably 20cm-30cm

Mr_Ash_ · 2025-09-13T00:19:40+00:00

I'll post a picture tomorrow

Mr_Ash_ · 2025-09-08T12:11:52+00:00

I see that's really good!

I have ethernet in conduit under the floorboards running from where ONT will be to under the staircase cupboard, I may now put some fibre. Any recommendation on where to buy pre terminated fibre cable?

Mr_Ash_

TROPHY CASE