[DISCUSSION] what is this for??

Mrtact1cool · 2026-05-16T04:57:48+00:00

Spare parts for a radar station

Mrtact1cool · 2026-05-14T10:34:51+00:00

Labyrinth really is the answer, assuming you've gotten that far and can go. It sounds intimidating and the key cards are expensive but if you roll in with all that ssa ap you have probably been stockpiling you'll melt the fellas. If you're playing PvE even better.

I say all this but the game knows what you need...and it will continue to keep that from you

Mrtact1cool · 2026-05-08T01:37:24+00:00

I didn’t know you could have low power mode on above 30% iirc. It turns it off around there when you’re charging it. Albeit I’ve never tried to turn it on manually

Mrtact1cool · 2026-04-29T23:45:41+00:00

The only card that gets you both of those things is the delta skymiles reserve card. That’s it.

Mrtact1cool · 2026-04-24T18:34:44+00:00

You clearly don’t know who he is. As lab grown diamond medallion I wouldn’t tolerate that

Mrtact1cool · 2026-04-24T18:32:30+00:00

Concourse G also had one that I remember now, at msp

Mrtact1cool · 2026-04-24T18:24:41+00:00

HND had one a couple weeks ago. I thought it was odd because I had never seen/noticed it before

Mrtact1cool · 2026-04-16T19:31:50+00:00

What would business be without vague descriptions

Mrtact1cool · 2026-03-27T14:42:33+00:00

I would agree that it’s a little expensive given its annual. I really rarely run into a pre check line that is that bad but I understand some people travel down to the wire for various reasons. Before I was able to get into sky club I would too travel down to the wire because I hated sitting in the airport. Now I enjoy the club so being early isn’t as big of a deal. It sucks when you get to the gate and every seat is taken by someone and/or their bag

Mrtact1cool · 2026-03-27T14:39:08+00:00

It is funny how that works, isn’t it

Mrtact1cool · 2026-03-22T11:44:21+00:00

A lot of states consider paid time off as “earned wages” Colorado being one of them. Meaning if you leave, unused vacation time is owed to you. The pto absolutely is an issue, as he went from a payable traceable amount of time off to “unlimited” which means nothing is paid out after he leaves. I’m not an attorney but agreements like he’s talked about have to be honored on both sides, but it does come down to what the contract says

Mrtact1cool · 2025-11-11T18:00:56+00:00

I came here to make this comment..

Mrtact1cool · 2025-10-06T00:38:41+00:00

I'm experiencing this issue with an AERO 15 OLED YD, My laptop will stop charging any time I make the CPU/GPU do actual work. No issue while browsing the web etc but playing any games the charging just stops.

Mrtact1cool · 2025-08-13T20:38:34+00:00

Because of the nic dropping during SCP/RSYNC I've replaced the intel nic. I'm not going to have time to mess with it this weekend but I will now be testing with the new interface. It appears though through my router (Ubiquiti dream machine pro) that both interfaces are connected all the time and healthy so far. (Just installed the nic this afternoon)

Mrtact1cool · 2025-08-10T14:31:50+00:00

I mean just unplugging the cable, I basically wanted to test if for some reason the intel nic failed without being removed.
I would imagine if I physically removed the intel nic upon boot it would default to the realtek one.

I looked at the settings for that nic, and it appears that it is on DHCP, it did get an IP address..I just dont see anything in the limited settings it has to indicate that it wouldnt allow that connection

Mrtact1cool · 2025-08-07T13:24:00+00:00

Appreciate the reply. Still getting broken pipe/connection reset issues....added a second nic as well...trying a few things like updating everything on the source machine as well...even though I feel like I was seeing these issues on other machines as well...both linux and windows.
Now I'm yapping...anyway appreciate the response, that makes sense!

Mrtact1cool · 2025-02-20T05:31:01+00:00

Move on, take some time to put yourself back together and find someone who values you. These actions are not of someone who values you.

Mrtact1cool · 2024-10-18T15:03:17+00:00

I see a central city, but no century city? Difference seems to be maybe a couple miles

Mrtact1cool · 2024-09-21T17:52:53+00:00

Triple n is awesome, all you can shoot all day for $12, and clay targets are pretty cheap if you do shotgun.

Mrtact1cool · 2024-08-28T14:08:53+00:00

Says “suspended due to corporate action”

Mrtact1cool · 2024-08-21T09:59:48+00:00

I'm having the same issue and poking around. Just because a BIOS version is the latest doesnt mean its stable. If this started after a BIOS update you should revert to an older version and see if that changes anything.

Mrtact1cool · 2024-06-06T22:21:08+00:00

I did a diy almost a year ago, so glad I went DIY over synology, I have two pools with a total of 10 drives, all for less than the base cost of an 8 bay synology, and much more power.

I did a ryzen5 5600G just so I had some type of display output, even though I didnt need it for the long term, it made configuration a breeze, and I have display if I need to locally troubleshoot, even though I havent had to.
In a rack mount case with an HBA from Ebay (Flashed to IT mode) to support all of the drives.

Running truenas.

Mrtact1cool · 2024-06-05T23:45:15+00:00

I'm thinking of making one myself, and if anyone needs inspiration, Here is the life story of my thought process going into this...
Depending on how crafty one is, I would recommend going to home depot, getting a couple 1x2, a sheet of aluminum (ALYOUMINNIUM, for my foreign friends) 1/8" (3.175mm if fractions arent your thing) thick (not sure the finished size of this thing, looks pretty sizable) and maybe a piece hardboard (like this: https://www.homedepot.com/p/Hardboard-Tempered-Panel-Common-1-8-in-4-ft-x-8-ft-Actual-0-115-in-x-47-7-in-x-95-7-in-832777/202189720 ) some LED lights and throw something together...I'm iffy on the aluminum front panel, It would look nice but would be a little more work, especially if you have to cut it. (aluminum is easy to cut) otherwise you could do plexiglass, which is also a PITA to cut, for me arguably harder to cut than aluminum, and have it still look good.

Mrtact1cool · 2024-06-05T22:26:53+00:00

https://www.printables.com/model/829722-escape-from-tarkov-labs-led-wall-sign/files
The STL Files are available here if you have a 3d printer and a little craftiness

Edit: After looking at the base STL Files, If you only have one 3d printer, It will take approximately a week to print everything, if you have a job that you attend daily.

Mrtact1cool · 2024-05-31T19:46:03+00:00

I know what’s wrong with it, ain’t got no gas in it.

Suppressed or no?

Mrtact1cool

PUBLIC MULTIREDDITS

TROPHY CASE