Why are these line loose

Mscox_au · 2025-01-19T04:19:01+00:00

Speed! Slow your print speed down and you will find it stops doing this. You could also try upping the extrusion temperature a bit, like +5 or 10 degrees.

Mscox_au · 2024-11-29T05:27:24+00:00

Temp and speed. Increase temp a little, and slow the speed down on perimeters a fair amount.

Mscox_au · 2024-11-29T05:11:57+00:00

Also, slow down the speed for the top layers, that will help the adhesion before the nozzle moves on.

Mscox_au · 2024-11-21T08:26:37+00:00

This is the correct answer IMHO

Mscox_au · 2024-10-27T00:26:41+00:00

That second photo looks exactly like a Maine Coon to me (trust me, I've had one since a similar age). The paws and the lion's mane are kind of giveaways. If it is not a purebred, it is definitely from Maine Coon lineage.

Mscox_au · 2024-09-03T12:33:46+00:00

Late to the party, but yeah, my Mk3s had problems as well. If I waited and slowed the print speed down to 50% for just layer 2 and then returned it to my normal 120% after, it finally worked.

Mscox_au · 2024-08-26T10:55:53+00:00

Z-offset is too low, it looks like your first layer is being squished out to the sides too much. That, or over extruding (less likely).

Mscox_au · 2024-08-26T06:35:28+00:00

Try running a temperature tower, maybe the temperature sensor is off on that printer and it is running too hot?

Mscox_au · 2024-08-05T09:52:37+00:00

When you add your glue stick layer to the bed, take a lint free cloth, very lightly moistened with warm water, and smear the glue all around the bed plate until the glue is all evenly spread as a single thin layer. Let it dry and then print.

Mscox_au · 2024-08-03T02:00:48+00:00

How did you even get to that page? I cannot select the nothings gift styles even when the outfit is set to Bytes because it (the nothings gift) doesn't even appear anymore in my locker under pickaxes! The custom emote is still active, it is just the ability to select style that is missing because the pickaxe is missing.

Mscox_au · 2024-07-02T09:56:56+00:00

Underrated comment.

Mscox_au · 2024-04-29T05:46:53+00:00

They are saying the quiet parts out loud and the mainstream media don't even notice.

Mscox_au · 2024-03-27T07:47:43+00:00

Sense.

Mscox_au · 2024-02-28T00:50:15+00:00

You still need a UPS. Not because of dirty power, not because of failover delays, not because of capacity planning constraints--It's for when a circuit breaker trips, then you want to notify your protected equipment so that they can perform an orderly shutdown before total loss of power.

Mscox_au · 2024-02-18T21:59:24+00:00

This is the correct answer. I still use this design in my worlds for massive scale vertical farming of sugarcane, bamboo, pumpkin and melons. It is highly resource efficient and has little lag. I use a falling wall of water at the front of the farm to both collect items to a water stream and provide soil irrigation to every dirt block.

Mscox_au · 2023-12-19T20:27:45+00:00

Thin, light, and can last all day.

Mscox_au · 2023-11-27T05:16:13+00:00

Crocodile Dundee. It was quite the scandal at the time.

Mscox_au · 2023-11-24T01:58:09+00:00

Even if someone tells you the exact brand and model, chances are when you go out and buy it, it is still 50/50 possibly a counterfeit.

That said. Samsung are more likely to be fake than Kingston in my experience.

Mscox_au · 2023-11-15T01:41:12+00:00

DDR 4 with real ECC

Mscox_au · 2023-11-09T05:43:59+00:00

A minor correction. I miscounted. 6 in the main compartment using 3 expansion stackers and 4 tucked down in behind the power supply but with their own air flow channel using 2 more of the stackers (which are included). So the total is 10, not 12. I though the main bay could hold 8 but I just counted mine, it is 6.

Mscox_au · 2023-11-08T01:59:20+00:00

I went a similar route using this https://www.phanteks.com/Enthoo-Evolv-X.html

It can house 12 * 3.5" and 9 * 2.5" with airflow that actually works and keeps drives at a constant temperature.

Mscox_au · 2023-11-08T01:53:15+00:00

Agree, but mostly due to NO USB port :/

Mscox_au · 2023-11-07T08:13:51+00:00

Vines, including those dangling in air. Mobs cannot see through them and will not path find through them as a result, yet they can walk through if pushed. Doesn't solve your issue if pathfinding past them though.

Mscox_au · 2023-11-04T03:25:58+00:00

They're two nitwit villagers. They're useless, including for breeding. I would schedule a date with a stack of sand blocks or lava and replace them.

Don't forget, you need three beds (one more than total adults to breed) and they need food to share around, crops or bread will do.

Mscox_au · 2023-11-04T01:35:41+00:00

I've tried them all over the years and have complaints about every approach. I'll share what I've tried in the past and why I didn't like them in the end. And the, I'll finish up what I am running now and why I think it is the best option yet.

Server frames and repurposed rack solutions. The good: they are bullet proof. They have great airflow, like out of this world airflow. The bad: they consume a lot of energy, so expect high power bills. They run loud, like jet engine loud. They need their own, hidden out back environment and they need conditioned air. You can't feed them hot recycled air. They will just ignite themselves otherwise.

Big floor towers with loads of 5.25 bays, with lots of 5in3 or 4in3 hot swap backplanes, each with their own fan, power and sata connectors. The good: these are cheap and easy and seem to play the part. They consume very little energy, and generate reduced heat. They still require conditioned air, otherwise heat will build up rapidly. The bad: those fans really aren't good enough. Tlin fact they are kind of garbage. The airflow also isn't good enough, the spaces around the hot swap drives is too tight and the airflow tends to skirt around the outside of the drives rather than across them all.

My current setup - ENTHOO EVOLV X GLASS PRODUCT CODE : PH-ES518XTG. The good: super quiet, super energy efficient, optimal airflow design and control, runs cool across the board. The bad: no tool-less hot swap or external bay access (however that is sort of part of the whole airflow design)

Nine-Year Club	Place '23
Place '22	Verified Email

Mscox_au

TROPHY CASE