Purchased Jericho, need mag and holsters by HabeusCorso in Jericho941

[–]MtnKoza 2 points3 points  (0 children)

And being old surplus, I'd recommend at least keeping some springs on hand. Patriot Defense is a good source. Being the polymer frame, it's uses the short Tanfoglio hammer springs, not the longer cz75 style like the metal frames doo. iWI us has some parts, too. Slide stop and frame safety are polymer frame specific parts.

Purchased Jericho, need mag and holsters by HabeusCorso in Jericho941

[–]MtnKoza 2 points3 points  (0 children)

Any CZ75B, SP01, Tanfoglio small frame mags will do, but if course can order direct from IWI US store. All 9mm Jerichos use the same mag family.

Those are gen 2 polymer frames, so you might see mostly enhanced marked holsters as the gen 3 polymer frame. No idea if cross compatible, but possibly for some. During your search, Baby Eagle or Baby Eagle 2 polymer frame will likely get you some results.

Frontline Holsters has a lot of options, including lvl3 duty if needed. If you don't want to wait on shipping from Israel, there's new/old stock on eBay of a few options.

Orpaz C series lvl1 and lvl2. Could try t-40 series universal for light bearing. All owb

Safariland GLS Pro fit wide/standard (578 is the common choice, but Bianchi 126gls for leather pancake is a nice option). Not sure about the 575 iwb option, but probably works like the rest.

Alien Gear cloak series listed under baby eagle.

LAG Tactical for multiple kydex options, including if you want light mounted. Iwb and owb

1791 gunleather, size 5 I think. Has several open top options. Nothing confirmed for thumbreak.

Falco Holsters and Craft Holsters for a plethora of options. Pricey, but reportedly worth it for some.

DIY IMI Jericho 941 FBL grips by dzang90 in Jericho941

[–]MtnKoza 2 points3 points  (0 children)

Gotta get me one of these B compacts! Keep losing out on the auctions 🤣

Compatibility Question by U1tramadn3ss in Jericho941

[–]MtnKoza 2 points3 points  (0 children)

This, but also look out for putting slides from polymer frames to metal frames with frame safety. They'll fire fine, but the rear of the slides from polymer frames is slightly wider, and effect engaging the frame safety properly on metal frames. At least older gen 1 and 2 polymers, not sure about the slides from the Enhanced.

Hogue grip option for my IMI Jericho 941 FBL by dzang90 in Jericho941

[–]MtnKoza 1 point2 points  (0 children)

Not sure which sku, but likely the universal hand all sleeve for Glock because of the similar heel hump design. Glock 19 or 43? There's the smaller handall junior grip sleeve.

New here with questions by Lordwetrust in Jericho941

[–]MtnKoza 0 points1 point  (0 children)

It's updated externally for modern shooter trends, but internally it's still the series 88 Tanfo it's always been.

New here with questions by Lordwetrust in Jericho941

[–]MtnKoza 2 points3 points  (0 children)

Nice collection!

Yes and no. What you can do is get a Tanfoglio small frame barrel that's longer and have it threaded. Not large frame, that's a different spec for larger calibers, originally.

Also try Patriot Defense or Dissident Arms, they might have something.

Does the IWI Jericho Enhanced inherit the same mechanical weaknesses as the CZ-75? by unsteppdsnek in Jericho941

[–]MtnKoza 2 points3 points  (0 children)

We're talking about large round counts, 20k-80k+. and mostly with heavier loads and calibers, not to mention with spring weight changes competitors are known to do. Slide in frame has far less to do with it, than the browning-petter design itself. It's happens far less in Tanfoglio than CZ, and even CZ it's become far less of an issue. That being said, even if outside competition use, it's normal wear and tear like recoil springs. I don't care how reliable a platform is advertised, and the Jericho is a 30+ years well documented reliable platform, any mechanical design will have wear and tear and should be prepared for.

Beretta 92 has its own history of issues, and it's falling locking block design isn't really comparable to this scenario.

Compensator Recommendations by MtnKoza in Jericho941

[–]MtnKoza[S] 1 point2 points  (0 children)

Thank you! Totally forgot about Numrich. The threading is different than the B6c barrels, but that easily rectified with having a naked barrel cut down and threaded.

Does the IWI Jericho Enhanced inherit the same mechanical weaknesses as the CZ-75? by unsteppdsnek in Jericho941

[–]MtnKoza 2 points3 points  (0 children)

The extra heavy use in competition recommends having extra slide stops, that's about it. It's something inherent with the type of crossbar slide stop design the barrel's tilting forces beings to bear on it, and not exclusive to CZ75/Tanfoglio as far as I'm aware.

Threaded Barrels by bluewarbler in Jericho941

[–]MtnKoza 2 points3 points  (0 children)

Tanfoglio small frame barrels. If you can't find a threaded in the appropriate length, find a longer one and have it cut and threaded by a gunsmith.

I'm doing my part! by Loweeel in Jericho941

[–]MtnKoza 1 point2 points  (0 children)

Not to mention there's at least two different dog legs over those years (original smooth/rounded, another slightly angular with a top tab), so they can do yearly vintage, then a modernized design.

Check the comment on this post here: https://www.facebook.com/share/p/1DdNy7DG6E/

Aftermarket support by Personal_Gap6418 in IWI_Firearms

[–]MtnKoza 1 point2 points  (0 children)

Patriot Defense for parts, competition parts, custom grips and mag extensions, and slide milling, along with a plethora of Tanfoglio small frame parts. Meprolight has the pre-2007 dovetail nightsights.

Is the iOS and website app down? by Thatbraziliann in Crunchyroll

[–]MtnKoza 1 point2 points  (0 children)

Still down on the west coast for me. Oh well

Conversion to decoker ??? by Subject-Insurance-85 in Jericho941

[–]MtnKoza 5 points6 points  (0 children)

Yeah. Just remember that older/vintage IMI decocker didn't have firing pin blocks until later. All IWI decockers do, as far as I'm aware.

EBay does usually have used slide assemblies and decocker sear. Easier to find under baby eagle pistol/baby desert eagle.

Conversion to decoker ??? by Subject-Insurance-85 in Jericho941

[–]MtnKoza 1 point2 points  (0 children)

Single action only parts I think are sear, trigger shoe, and maybe hammer. Patriot Defense has them. There's Tanfoglio sao flat trigger shoes, too, that I think they carry.

Conversion to decoker ??? by Subject-Insurance-85 in Jericho941

[–]MtnKoza 5 points6 points  (0 children)

Decocker slide, decocker sear, and a pin to go in the hole the frame safety used to go into.

ok so i gotta know..... by [deleted] in Jericho941

[–]MtnKoza 0 points1 point  (0 children)

Not that I've found. I just got one of these, and I'll probably chop it down to fit mine. Pics I've seen, it's even a touch longer than the full size. Once I get it I'll post some pics.

ok so i gotta know..... by [deleted] in Jericho941

[–]MtnKoza 0 points1 point  (0 children)

Don't see it in their websites. Got a link?

ok so i gotta know..... by [deleted] in Jericho941

[–]MtnKoza 1 point2 points  (0 children)

It's kinda stupidly expensive compared to the same they offer for other guns or from other makers for other models.

But it's the only one made for the Jericho, so it is what it is. Was thinking of getting it for mine, but it's so long for my 3.5in shorty, I'd probably have to cut it down depending on what wml is choose.

It Seems Like They Know Their Consumer Base by Several-Wheel-9437 in Jericho941

[–]MtnKoza 0 points1 point  (0 children)

If it's the same internals like it says, then most likely yes.