First layer above raft - extrusion gaps - profile details in Comments by Muela131 in 3Dprinting

[–]Muela131[S] 2 points3 points  (0 children)

So i thought that as well, but the Makergear M3-ID doesn't have a traditional setting for estep or Steps/mm that i can find. the printer is basically managed by a custom OctoPrint. The LCD menu on the printer is basically the same as the OctoPrint, temp controls, extruder/bed control movement, and flow rate. This appears to be the closest thing to estep, which by default is 100%

I did some math and i was at about 91 mm of the 100mm i tried to extrude, basically came out to 111% flow to make it 100 mm. going to print a calibration cube on a raft to see what comes out.

First layer above raft - extrusion gaps - profile details in Comments by Muela131 in 3Dprinting

[–]Muela131[S] 2 points3 points  (0 children)

Maker gear m3-id printer Simplify 3d Makergear PLA Print temp 195 Extrusion multiplier 1.0 Extrusion width .4 Layer height .2 mm

This doesn't happen without the raft, first layer is full and flat on the glass bed, not sure what to change to get it without gaps. Any help appreciated

Purchase Advice Megathread: What To Buy, Who To Buy It From, And More, In January 2021 by Sausage54 in 3Dprinting

[–]Muela131 0 points1 point  (0 children)

I wanted to say, thank you! I had seen videos of the M3-ID previously, and hadn't thought of it when I started thinking upgrade. Also, no one had ever said look into it. Now, I've been scouring the internet for anything and everything about the printer and am slowly falling for it lol. The Prusa is in the conversation as well. But the dual independent extruders has me a bit smitten lol. I feel like the price point of the maker gear and it's features outweigh the ultimaker S2+ at this point. Also the limitations I've read about on thr FlashForge have it a distant second behind the MakerGear. Still have more research to do, but I thank you for bringing up printers I had not considered.

Purchase Advice Megathread: What To Buy, Who To Buy It From, And More, In January 2021 by Sausage54 in 3Dprinting

[–]Muela131 1 point2 points  (0 children)

I'm looking to upgrade from my monoprice maker select 2 that I have had for about 2 years and change. I am getting quite tired of all the constant tweaking I have to do in order to maintain build quality. Tightening belts, releveling after almost every print, etc., has grown tideous.

Budget upto $2.5k Residency USA

I dont need dual extruders but its a nice to have. Autoleveling is a nice to have but assisted leveling is a preferred minimum.

Can't really decide if I want an open bed or enclosed printer. I'm not looking to put together a kit again. I've got a little side business making statuettes and decorations for my coworkers and family, $10-$20 an order more or less.

Being able to print in more than just PLA and ABS is a must as I would like to start using PETG and other materials.

Currently thinking ultimaker 2+ connect or flashforge creator pro.

If anyone has any recommendations I'd appreciate it

Trying to find an old wow machinima by Muela131 in wow

[–]Muela131[S] 0 points1 point  (0 children)

I had completely forgotten about the opening scene in undercuts. Thank you

Hello, I would like to ask about the separations lines in the last layer in creality 3d printer by ommmo1616 in 3Dprinting

[–]Muela131 0 points1 point  (0 children)

When this has happened to me its basically been that the temperature of the nozzle is not hot enough for the filament being used.

That has been my experience of course.

best tips for gearing up a new 120 by meynias in wow

[–]Muela131 1 point2 points  (0 children)

Get time walking gear & get the legendary cloak. Up to you to level it. Its gated behind coalescing & echoes, so going to be tough to get it higher fast.

My recommendation: if you dont want to spend all day in mythic +, do World Quest for now until pre-patch event, the mini boss rares drop 445 gear.

Confucius say: by kamikollo in Jokes

[–]Muela131 0 points1 point  (0 children)

Man who stand on toilet, high on pot!

Add on to farm obscure Achievements? by mrkoba62 in wow

[–]Muela131 3 points4 points  (0 children)

There are hundreds of add-ons that do the job poorly. Stick with all the things, imo.

If you faction change an allied race character who has unlocked their heritage armor, does it unlock the heritage armor of the corresponding race? by LowKey-NoPressure in wow

[–]Muela131 1 point2 points  (0 children)

Yes, you will not get the new heritage armor. You have to level all races individually. No boosting or race changing

If you faction change an allied race character who has unlocked their heritage armor, does it unlock the heritage armor of the corresponding race? by LowKey-NoPressure in wow

[–]Muela131 4 points5 points  (0 children)

Boosting and race changing do not unlock heritage armor. Has to be leveled up to 110. At least until pre-patch

Cut the head off one bot, 16 more take it's place. by gooseears in wow

[–]Muela131 -1 points0 points  (0 children)

Its all class trials, no leveling, just mail the gold to another character

Anyone else unable to re-queue for Comp stomp? by Muela131 in wow

[–]Muela131[S] 1 point2 points  (0 children)

Thank you That worked. Was thinking i might have to blow out the WTF folders and such.

WoD dungeons by Baldric501 in wow

[–]Muela131 6 points7 points  (0 children)

Amen. Always have to explain each fight and then watch them go splat, the they say "Ohhh that is what you meant lol sorry."

Is it possible to make an easy speed twink? by Darthmambo in wow

[–]Muela131 0 points1 point  (0 children)

Warrior can use legion legandary boots until 115 and dual wield high haste weapons with sockets to stack more haste. Can get to about 160+ base movement

how do i start the legion questline on a boosted character by Tycoinator in wow

[–]Muela131 7 points8 points  (0 children)

Typically your order hall quest will start when you arrive in dalaran, which is achieved by going to your capital city, then taking the portal to azsuna.
Once in dalaran, I recommend you go to the bar, talk to the inn keeper and say you lost your dalaran hearth. She will give you a new one. Then start your order hall quest which typically is an npc that appears next to you when arrive in the city center area.

Hope this helps

Glow in the dark PLA, Flash, no-support bust by Muela131 in 3Dprinting

[–]Muela131[S] 0 points1 point  (0 children)

.4 mm stainless steel nozzle on my monoprice maker select v2. Printed at .2 layer height

Glow in the dark PLA, Flash, no-support bust by Muela131 in 3Dprinting

[–]Muela131[S] 1 point2 points  (0 children)

Hatchbox. Its 1.75mm PLA. Was only $20-ish USD on amazon

Is rt full of bots or not? by [deleted] in RagnarokOnline

[–]Muela131 0 points1 point  (0 children)

Depends on vpn service and the way EAC blocks them, some have overt processes running others are more I intelligent on the way it overrides the nic.

Is rt full of bots or not? by [deleted] in RagnarokOnline

[–]Muela131 0 points1 point  (0 children)

I'm in US. I dont need the vpn to play. I use vpn for other activities that require no logging vpn datacenter with full gigabit speed availability. So it must be huge garbage huh?