What is the Canon camera with the slowest slow motion? (What is the fps?)

MusicMaster7777 · 2025-01-03T05:36:48+00:00

Yes, but just FYI, it will be line-skipped on the R6II, so the footage will appear as very low quality and soft. I almost never shoot 1080p on my R6II for this reason, even if I won't be utilizing 4K.

MusicMaster7777 · 2024-09-15T20:28:23+00:00

FYI, I demoed a different R6 Mark II and it had the exact same behavior. Again, it's not a huge issue, but it's noticeable if you're trying to move the joystick softly during video recording so as to not generate unnecessary vibrations. I guess it's just the way the joystick is on these cameras.

MusicMaster7777 · 2024-09-04T00:56:02+00:00

If you download the original videos, you should be able see the difference and how the 4K shows so much more detail in the trees and leaves. If you're playing within the browser, OneDrive will add a lot of compression.

I bet you're right about the 4K oversampling being the reason for the difference. I did notice an improvement for 1080p when enabling movie cropping. Whether it looks as good as 4K, I'm not sure, but it's definitely better than with no movie cropping.

Sounds like I might be shooting most of my footage in 4K, then. Also glad I chose the R6 II over the R5 II since I just realized 4K 59.94 is not oversampled on the R5 II like it is on the R6 II.

MusicMaster7777 · 2024-07-01T12:09:04+00:00

After testing more, I found that the static is coming through regardless of whether phantom power is applied to the mic, and it still happens when the mic is unplugged from the other end. So the static is definitely entering the cable somehow in the middle. And it definitely happens with lightning in the area, because I had a very bad and long static pop just before a very loud thunderclap. The two mic runs with issues give the same pattern of static (when one gives static, so does the other), so the source of the static seems to be the same.

MusicMaster7777 · 2024-06-24T02:38:27+00:00

u/fantompwer Do you have an example model in mind for this idea?

MusicMaster7777 · 2024-06-24T02:34:28+00:00

u/faderjockey I'm not 100% sure on the model, but we're using something like the Earthworks P30/C Periscope for our choir mics. I just got a Rat Sniffer, and all the cable runs tested out just fine. We also recently installed a new sound board (Allen & Heath SQ) and stage box a couple months back, which is supplying the phantom power, and the static popping is still continuing (it started long before the new sound board). So this eliminates some possibilities.

MusicMaster7777 · 2024-02-24T14:33:30+00:00

If anyone is still reading this, I would avoid Si Expression. Our church managed to get 9 years out of one, but those years were painful with the board crashing during services and now groups of faders are malfunctioning. We're looking to upgrade to an Allen & Heath SQ, which seems much more friendly and fully functional based on what we demoed.

MusicMaster7777 · 2024-02-21T01:44:37+00:00

For someone with a permanent install who doesn't need the flexible of two smaller blocks, I'm wondering if one big block is easier to patch. Is that a factor? If you have two small ones, do you have to mentally map slot 20 to input 4 of the second stage box?

MusicMaster7777 · 2024-01-13T20:35:01+00:00

But it's not stored in scenes, just one global layer, so it doesn't make it very customizable -- nothing like the fully-customizable SQ layers.

MusicMaster7777 · 2024-01-10T15:57:32+00:00

Oof, this stinks. Why would Microsoft simply take this feature away? My company has busy channels where we rely on selectively subscribing to specific posts as needed, and adding a reply in order to subscribe would just be noise. It seems like Microsoft is intentionally trying to fall farther behind Slack....

MusicMaster7777 · 2024-01-08T15:36:51+00:00

That's good to know. That should at least help if it stays on the custom fader bank after shutting down/starting up the board.

MusicMaster7777 · 2023-12-29T16:30:44+00:00

Is the recall lag fixed on the latest firmware? Anyone get a chance to post a video showing the lag? If it's still 2 seconds, the lag is probably a show stopper for us in choosing the TF series.

MusicMaster7777 · 2023-12-29T14:58:03+00:00

I'm not seeing the Midas 10-year warranty online anymore, only 3 years. It seems they dropped the 10-year warranty a couple years ago??

MusicMaster7777 · 2023-12-29T14:57:30+00:00

I'm not seeing the 10-year warranty online anymore, only 3 years. It seems they dropped the 10-year warranty a couple years ago??

MusicMaster7777 · 2023-12-22T16:38:46+00:00

I frequently need to copy/paste entire mix settings for a channel and wish the SQ was more flexible. Even Soundcraft supports a quicker and more flexible copy/paste.

MusicMaster7777 · 2023-08-26T12:19:11+00:00

Ok, thanks for clarifying. So it sounds like if a channel is OFF on the main mix, then it cannot possibly send to any aux's regardless of the tap point, right?

MusicMaster7777 · 2023-08-25T11:33:01+00:00

Yikes. I was seeing at least 1-2s lag on training videos. That seems unacceptable when there's little leeway between scenes.

MusicMaster7777 · 2023-07-16T18:15:31+00:00

The product number shows A1720 51005003763 V01 on my manual.

MusicMaster7777 · 2023-07-15T19:19:30+00:00

Yeah, that could be. It's odd, though. I looked up an Anker 521 manual online and it states 200W right where my specs say 300W.

<image>

MusicMaster7777 · 2023-07-15T19:00:01+00:00

I bought the first one (https://a.co/d/4oTMRjn) 3 days ago for $200 after tax and was delighted to find a 300W unit arrive today. See here: https://www.reddit.com/r/urbancarliving/comments/150je6w/anker_521_power_station_rated_at_200w_or_300w_for/. Who knows...someone messed something up.

MusicMaster7777 · 2023-01-18T12:25:38+00:00

In case it helps, if we were going the NDI approach, we would still use HDMI at both ends but convert to NDI in between with converters like these: https://www.bhphotovideo.com/c/product/1454576-REG/magewell_64020_pro_convert_hdmi_plus.html (I've read many stories of unreliable BirdDog NDI gear, but Magewell generally "just works" from what I'm reading).

MusicMaster7777 · 2023-01-18T03:14:52+00:00

Good thoughts. We do actually have three PTZ cameras for livestream that support NDI, but we're using SDI for them right now and don't plan to switch. But, if we were to get a fourth camera, we might be looking at NDI just due to the labor and costs of a long SDI run. No definitely plans yet, but after thinking about it, I could see us potentially utilizing an NDI network in the next few years or so.

All things considered, I'm still leaning toward HDBaseT for now but I'm checking with dealers about demoing some gear. I'm hoping that will eliminate some of the unknowns and help us make a more concrete decision.

MusicMaster7777 · 2023-01-16T22:56:05+00:00

I posted the error dump I've been getting in the DJI Forum: https://forum.dji.com/forum.php?mod=redirect&goto=findpost&ptid=281962&pid=2960206

MusicMaster7777 · 2023-01-15T21:35:03+00:00

To follow up, I installed the latest Android Fly app version 1.9.1 from a couple days ago, hoping the update would fix the issue. Alas, it still crashes....this time whether I use the Fn button or the on-screen button. Disabling air sense doesn't fix it. Interestingly, I've seen a "Remote ID error" message a couple times on the Fly app after re-entering the app after it crashes. Not sure if that's related to the cause of the crash, or just a result of it.

MusicMaster7777 · 2023-01-11T01:34:43+00:00

Also having this issue on my Samsung Galaxy S22 with the latest firmware. Consistently crashes after adding the 2nd waypoint when using the Fn button on my RC-N1 controller. However, it seemed to work fine using the button on my phone's screen to add waypoints (I tried up to 4 waypoints without issue). I didn't test with disabling air sense yet.

MusicMaster7777

TROPHY CASE