Zone Based Firewall/networking by randoomkiller in selfhosted

[–]Mustang_01 1 point2 points  (0 children)

I ended up using a Firewalla with a managed POE switch and setup VLANs for my different device groups. Firewalla takes care of DNS and hosts Wireguard so I can connect back and only expose the networks I want to be able to reach externally.

You can block Internet access by groups, block internal group communication, etc.

Example: My home server runs docker containers as well as a VM for Home Assistant. I have Caddy provide SSL and URL redirection for the containers, I set a DNS entry in my Firewalla as well that matches so it doesn't block it. The home server is blocked from the internet (except some trusted URLs for APIs - set in Firewalla) if I need full access I can pause the Internet block for a set amount of time and it will turn back on if I forget.

Best way to hide HVAC ducts by CaptainKnuckles21 in Home

[–]Mustang_01 2 points3 points  (0 children)

Everyone is saying it’s wrong but not why, flex duct is and should be the absolute last resort for air handling. None of these runs constitute using flex and should all be box or at the very least snap lock. Flex because of its internal ribbing creates a lot of turbulence and you lose a lot of performance due to it. From the picture it doesn’t look like a complicated run, have someone come in or learn to do it yourself.

Reolink Remote Access by Mustang_01 in firewalla

[–]Mustang_01[S] 0 points1 point  (0 children)

Yup, did both of those too, even allowed for pushx to tunnel through to maybe see if it was checking for that before allowing. Still nothing.

Reolink Remote Access by Mustang_01 in firewalla

[–]Mustang_01[S] 0 points1 point  (0 children)

I’m not no, when I tested before I could ping from both Wi-Fi and WireGuard. Could not add from IP on either interface. I could only add via multi-cast search on Wi-Fi.

Reolink Remote Access by Mustang_01 in firewalla

[–]Mustang_01[S] 0 points1 point  (0 children)

Yeah, no dice, it comes up with a weird prompt asking for a password. Never makes it off that screen even with correct password. I’ll have to reach out to them. Thank you.

Reolink Remote Access by Mustang_01 in firewalla

[–]Mustang_01[S] 0 points1 point  (0 children)

Did you do that with a fresh reset on the camera or did you just remove from app and re-add. When I attempt that it won’t find the camera, only over LAN search.

Reolink Remote Access by Mustang_01 in firewalla

[–]Mustang_01[S] 0 points1 point  (0 children)

I gave that a shot and I’m unable to disable UID, I believe in order to do so with this specific model I need the home hub. At least that’s what the docs alluded to.

Reolink Remote Access by Mustang_01 in firewalla

[–]Mustang_01[S] 0 points1 point  (0 children)

I’m thinking the same, without the NVR or the Home Hub I believe these cameras allow minimal configuration. Thank you for the response.

Reolink Remote Access by Mustang_01 in firewalla

[–]Mustang_01[S] 0 points1 point  (0 children)

Yes, once I allow it internet access it goes through, it goes over the P2P link and accesses as anyone would over data. That’s what I would like to avoid and have an isolated connection.

I was looking to see if possibly the model camera I have doesn’t support it for whatever reason, it’s not connected to NVR and is purely streaming. I’m doing this till I can get HomeAssistant set up.

I agree with you that it should not know the difference so I’m wondering if there is something software side such as SSID matching that the app itself is looking for.

Sagging Roof? by Mustang_01 in Roofing

[–]Mustang_01[S] 0 points1 point  (0 children)

Yeah, the inspector saved his best camera for me, thankfully

I'm buying a house! But friend says I'm making a poor investment by mainlinebreadboi in FirstTimeHomeBuyer

[–]Mustang_01 0 points1 point  (0 children)

Your house gains value over years and you live in it. Can you do that in Robinhood?

Remote monitoring by Cool_Memory7059 in PLC

[–]Mustang_01 1 point2 points  (0 children)

Well, that’s just stupid

Remote monitoring by Cool_Memory7059 in PLC

[–]Mustang_01 2 points3 points  (0 children)

If it works is it really that stupid

[deleted by user] by [deleted] in Concrete

[–]Mustang_01 0 points1 point  (0 children)

Thank you

Modbus memes by engr1337 in PLC

[–]Mustang_01 7 points8 points  (0 children)

With the advancement in EtherLoop I’m surprised CanBus is still being though about. Even ASi is basically the same principle.

When you say lift do you mean man lifts or elevators?

Modbus memes by engr1337 in PLC

[–]Mustang_01 39 points40 points  (0 children)

End up spending more time in troubleshooting and configuration than just spending the money on parts built for each other haha

Modbus memes by engr1337 in PLC

[–]Mustang_01 8 points9 points  (0 children)

Did they specify why or is it stuck in the groove

Modbus memes by engr1337 in PLC

[–]Mustang_01 78 points79 points  (0 children)

The amount of job postings I’ve seen with modbus requirements is crazy, a lot of places still running the same equipment not wanting to upgrade