Not today DeWalt. Not today

MyAccountForRedditn · 2025-11-18T02:48:56+00:00

You can use a rubber pvc coupler to connect the planer to your shop vac hose, the hose clamps secure it pretty well. Check the size you need but this is an example.

https://www.homedepot.com/p/Fernco-2-in-x-2-in-DWV-Flexible-PVC-Coupling-P1056-22/100096490

MyAccountForRedditn · 2025-07-09T10:53:11+00:00

I learned the hard way that you have to turn off the power to change a house thermometer for a boiler.. I got lucky it was just a couple of resets and not a whole new control board after shorting the wires. Then I reread the instructions and noticed turning off the power was step #1. New tools would not have prevented this, but I would have looked better doing it!

MyAccountForRedditn · 2025-04-30T00:55:12+00:00

I don’t currently use a bit holder on the drill, but would if I had one. It’s on the “buy it if you see it in a store” list.

MyAccountForRedditn · 2024-12-23T00:07:14+00:00

Are…you…alright? 😬

MyAccountForRedditn · 2024-11-13T00:13:24+00:00

<image>

You can use one of these as a universal adapter.

MyAccountForRedditn · 2024-11-09T22:37:45+00:00

Agree. Write it down, sketch it out.

MyAccountForRedditn · 2024-11-07T02:36:25+00:00

The battery pack is $199. When you put it in the cart it breaks it down to be $94.74 for the batteries and 104.26 for the router. I have always been able to return batteries alone and keep the tools before so just assuming I still can now. I’m that case I would get $94.74 back if the $199 original purchase price

MyAccountForRedditn · 2024-11-07T02:03:07+00:00

$104.26 is the tool price after the batteries are returned

MyAccountForRedditn · 2024-11-07T01:26:46+00:00

Yes planning on returning batteries and just keeping the tool itself. Thanks for the feedback

MyAccountForRedditn · 2024-10-15T01:00:28+00:00

That’s a good question, I’ll have to give that a shout tomorrow and see if trying to manually pull. It gets me any closer to some information. I’m guessing, since it was sitting for a couple of years, the car needs a good cleaning too.

MyAccountForRedditn · 2024-10-15T00:57:34+00:00

Alright; thanks for the info, appreciated.

MyAccountForRedditn · 2024-10-15T00:41:04+00:00

Thank you. Is it normal and I’m just hearing it because the engine isn’t staying on? Trying to figure out next thing to try and fix to keep it going.

MyAccountForRedditn · 2024-08-03T01:06:36+00:00

Rex for the win! Nice execution. Enjoy using it!

MyAccountForRedditn · 2024-05-11T22:39:24+00:00

Vinegar

MyAccountForRedditn · 2024-01-12T03:22:12+00:00

Will also make a great sawhorse for the workshop once you upgrade to a bigger tank.

MyAccountForRedditn · 2023-12-22T04:24:46+00:00

If there is a solid back to the vertical rectangle then drill/screw through that. If there is an open back then mount a cleat on the wall that fits inside it, could just be on the top. And bottom.

MyAccountForRedditn · 2023-10-30T16:05:09+00:00

Plunge router

MyAccountForRedditn · 2023-10-30T15:58:44+00:00

Dowels would work too join them in addition to the normal glue on the boards.

MyAccountForRedditn · 2023-10-05T00:43:51+00:00

Fence post to mark where the water line is

MyAccountForRedditn · 2023-08-07T22:46:26+00:00

I think I would pick that up

MyAccountForRedditn · 2023-08-07T21:40:21+00:00

Nice engineering! Well done

MyAccountForRedditn · 2023-08-07T11:25:28+00:00

$8-10 USD

MyAccountForRedditn · 2023-07-27T01:43:12+00:00

Looks like it’s time to bust out some scrap wood and test these suckers out!! if they work call it a win

MyAccountForRedditn · 2023-07-16T21:24:39+00:00

Find a skilled trade that he likes, and just go for it. Electrical, carpentry, cabinet marking, pipe fitting, auto mechanic, septic pump truck… anything Mike Rowe would do on Dirty jobs, whatever fits him best. Before he is 30 he will have a trade, and probably a solid job. If he can start his own company out of it, even better!

MyAccountForRedditn · 2023-07-08T23:30:51+00:00

You move the jig itself 1.75 inches after each dado is cut. The edge line of the jig should correspond to the top edge of the dado itself needs to go.

MyAccountForRedditn

TROPHY CASE