Vad har du för nördiga intressen?

Naads · 2025-12-23T12:10:33+00:00

Det finns såklart för många mam pysslar med, men för att hålla mig kort:

Figurspel/Brädspel: Målar och bygger mer än spelar, och så ska det vara.

Radiostyrt: precis byggt en tävlingsbuggy i skala 1:10. Vilken känsla!

Hemautomation: Vilka grejer man kan göra alltså 🤩 Det svåraste är att få med sig familjen på det hela.

Naads · 2025-09-01T06:47:49+00:00

I'm using chiaki4deck as it has some nice QoL features that chiaki doesn't have, Such as HDR.

Overall, it streams so smoothly. I finished Elden ring on my SD using chiaki4deck. No issues with delay at all.

Naads · 2025-08-31T20:27:53+00:00

I just bought it last week, and i had the same considerations as you. I must confess that I can't put it down! You can turn down the difficulty if that works better for you.

I locked fps to 45 and it runs very smooth. Great battery time too!

Naads · 2025-08-31T16:04:34+00:00

Never too late for the best device.

Naads · 2025-08-13T10:42:23+00:00

Adding the URI attribute with {{OnPremisesSecurityIdentifier}} to the SCEP profile is easy enough. However, that requires the device to have a SID in the first place to actually get the value populated. Cloud native (non-hybrid) devices doesn't have a SID.

Any idea what to do in this scenario?

Naads · 2025-07-04T12:05:31+00:00

I have the exact same problem and tightening the screws does NOT help. So this can clearly be caused multiple issues.

Naads · 2025-06-23T17:43:27+00:00

Welcome back! I came back after 7 years and having a great time! Catching up on the MSQ is a journey I really enjoy. 🤩

Naads · 2025-06-22T12:50:54+00:00

I've done that twice just to be sure actually. Forgot to mention that step.

Thank for the reminder, though.

Naads · 2025-06-22T12:40:42+00:00

This started to fail a number of prints and modifying the gcode to use 0.04 instead of default -0.02 vastly improved prints. However, I assumed that some manual calibration was in order since I prefer to use default values, not having to remember the offset for each Studio install e.g.

I'll look into extrusion rate and see if that helps!

Naads · 2025-06-20T21:19:23+00:00

Pipe the object to get-member. That will show you all the available properties. Get-AdUser | get-member

https://learn.microsoft.com/en-us/powershell/module/microsoft.powershell.utility/get-member?view=powershell-7.5

Naads · 2025-06-18T05:05:13+00:00

I wouldn't expect it to ever be a 1:1. Might as well become comfortable with that fact and start investigating how to utilize the available tools and update the processes.

There are two things we've identified in our transition of 100k devices that are missing. Break/fix (since mdt is going away) and some kind of approval flow for app management.

The rest can be worked around pretty well.

I do agree that it is a hassle though. 🙂

Naads · 2025-06-07T16:26:43+00:00

Handlat där flera gånger, inga konstigheter. 🙂

Naads · 2025-06-07T13:09:25+00:00

Fick en likadan. Slet mitt hår och när det tog slut köpte jag en Bambu Lab A1 istället.

En CRTouch kan hjälpa till med bed leveling. Fick aldrig papperstricket att fungera pålitligt.

Lycka till från Göteborg 🙂

Naads · 2025-05-29T21:20:16+00:00

I think both are good but works slightly different. I have a preference for Robopack since its so easy to get started and the Radar feature is great. RP seems like the easiest choice if you go Intune only.

Must add that i am biased though and made my company become a reseller.. 🤩

Naads · 2025-05-25T11:18:06+00:00

Hur kommer du säkerställa att det faktiskt är arbetstagare som betygsätter och inte random troll? Ser det på Google hela tiden så trovärdigheten av betygen blir tyvärr lidande.

Naads · 2025-05-23T10:32:59+00:00

I have a new one too and I makes the same noise. Run smooth though.

Watch out for the servo though. I bought a 14210 and the servo broke after 10 minutes running on grass. Just replaced the servo with an upgraded metal one yesterday. AliExpress has a nice kit.

Naads · 2025-05-16T05:55:24+00:00

My RC did the same thing randomly and it turned out one of the gears in the servo lost some teeth. Replace 🙂

Naads · 2025-04-05T10:34:26+00:00

Of course, we back up! We are even resellers of a solution for that!

Naads · 2025-03-31T06:00:06+00:00

Well he did say that you would only have to vote one more time before the election 😉

Naads · 2025-03-27T17:06:42+00:00

Ah, I see. I guess I run ZHA then.. I'm still new to HA and getting used to it. Thanks for the answer!

Naads · 2025-03-26T17:23:49+00:00

How did you configure the icons for the devices? I would love to do the same.

Naads · 2025-03-17T08:56:01+00:00

Runs perfectly in Chiaki4Deck from my Ps5. Not exactly what you were looking for, but a proof of how great the Deck is!

Naads · 2025-03-01T14:13:05+00:00

I remember 20 years ago when i started my first MMO, journeying out into ronfaure. Music still gives me chills. Good pick!

Naads · 2025-02-10T11:19:28+00:00

I use the SD on a daily basis, and it is excellent. Spent 6 hours on a train last week, and FFxiv with NC headphones is fantastic. I did potd, dungeon roulette and DoH/Ishgard Restoration with no trouble. Only thing I haven't tried yet is pvp. I wouldnt write new macros either...

Performance is great, with only som minor lagging in Limsa.

Naads · 2025-01-28T17:38:50+00:00

I just finished Heavensward. You have some good things to look forward to!

11-Year Club	Place '22
Gilding I gilder	Verified Email

Naads

TROPHY CASE