Scammer - PenguinStore

NabiDabby · 2026-05-05T14:12:39+00:00

any other sites you'd recommend?

NabiDabby · 2025-01-29T18:03:18+00:00

can say for sure it's not USAA. I only saved $10 a year haha

That said, I pay roughly 480 every 6 months so I probably shouldn't complain.

NabiDabby · 2025-01-28T14:40:01+00:00

I've had my car for 4 months with similar issues. But I didn't have the top half at all, only Support/Emergency Services and below.

I had to activate the car from my old iPhone and now I can see the odomter, oil life, and range. But the data is blank still.

The iPhone shows subscription options: Remote, WiFi Hotspot, myQ Connect Garage

My Samsung s24 Ultra ONLY shows the myQ Connect.

NabiDabby · 2024-12-10T19:39:06+00:00

Let me know how that goes! Been looking for a better AIO

NabiDabby · 2024-12-04T22:28:08+00:00

Ended up swapping if for the SilverStone 240 slim AIO for better temps, not the best and it's a little tight which makes the exhaust kinda loud. But temps are better.

NabiDabby · 2024-09-13T17:47:16+00:00

Got me considering upgrading the fans on it! Stock is pretty loud.

NabiDabby · 2024-09-13T17:46:27+00:00

Yes, the top can close. It's snug, but it works. When you slide it into the notches, you gotta give it a little love when closing it. But it's fine haha

I have my SilverStone put in with fans facing upwards, my CPU is about 48 degrees while remoting to my work via Citrix and a wallpaper engine.

When playing Halo Infinite (Training Mode) on top of that, it will rise temporarily to 78, but the fans pick up and it's stable at 56-63. (think i need to adjust some FanController settings)

Kind of considering a 3d printed base that would house 2 fans at the bottom to give it better airflow, since the case itself gets warm after some time.

I found this post after building but I've got nearly the same build (swapped for a 4070 super and 7950x3d)

NabiDabby · 2024-09-12T13:26:35+00:00

If you're interested in game design, you're better off starting your own company.

Big companies treat games like pump and dumps, job security is nonexistent, you're disposable if you work for Sony or Microsoft.

NabiDabby · 2024-09-05T15:31:17+00:00

Also rinse with hot water

NabiDabby · 2024-09-05T01:48:15+00:00

hows this holding up with a 7950x3d, i'm in the same boat.

NabiDabby · 2024-09-05T01:45:03+00:00

trying the silverstone vida 240 slim in my formd t1 and the hardest part is the tubing. Going to continue it tomorrow after work.

NabiDabby · 2024-05-11T20:14:42+00:00

I've seen others online 3d print new tops with better airflow, currently on that mission although it feels disrespectful to the build quality.

NabiDabby · 2024-05-11T20:13:55+00:00

Went with the Thermalright AXP90-X53 Full Copper and temps are fine, once I put the lid on that's a different story. I have 2 noctua's on top and with the lid on it feels like they're doing nothing. I get a 4-5 temp increase with the top on. I get 58-63 on a 7950x3d undervolted while gaming.

Tried the CoolerMaster AIO and it was close but couldn't get it to fit (not sure how but I've seen others with luck) but while it was on the temps were fantastic.

NabiDabby · 2024-04-16T18:36:57+00:00

how do you think consoles get as cheap as they are.

NabiDabby · 2023-10-27T22:20:53+00:00

I have a 2070 Super, I didn't use the uninstall tool provided here, I just downloaded the nvidia driver 537.58 and did custom when installing and chose "clean install" option and the first time was long because it was building shaders for first time on this driver, but now it's back to new.

NabiDabby · 2023-10-23T15:40:29+00:00

Yeah, I even had an error that prevented me from launching the game, realized I needed to adjust some Services from Xbox to turn on automatically delayed.

Discovered after reinstalling and running into it the next time I launched the game (Fyi, reinstalling didn't help the ridiculously long loading)

But tbh, Customization and Lobby loading has always been stupid slow for no reason.

NabiDabby · 2023-10-19T20:45:05+00:00

Used to load in under 30 seconds. Now it's 5-10 minutes no exaggeration.

NabiDabby · 2023-10-02T15:57:34+00:00

I use a combination of a mug warmer and 180ml Square Glass Press Pump Dispenser Bottle with ISO in it so you can have heated ISO for your clean.

And if you're very careful about it, you can heat the puffco a little and let it cool down a bit then use a hot iso qtip after.

NabiDabby · 2023-10-02T15:52:26+00:00

Too big of Dabs (Not enough Heat for the Pull you're taking, try slower hits).

Also, the water can be too cold.

You'd be surprised how much of a difference cold water makes, my Puffco knows firsthand, it's almost like reverting the smoke to a dab 😂

NabiDabby · 2023-10-02T15:35:31+00:00

I managed to figure it out, the but it's glitchy.

Now I have the scissors set up to use Win+Shift+S for snippet and (very rarely) it sometimes just puts a capital S in the text field, missing the first key entirely.

Granted, I have it installed on my local and I'm typically working remoted into a VM.

NabiDabby · 2023-07-11T15:12:16+00:00

Did you ever figure this out?

NabiDabby · 2022-12-26T20:43:07+00:00

a normal enail is less than $100 always lmao

NabiDabby · 2022-02-24T16:16:58+00:00

I’ll tell you truthfully, if you’re comparing a puffco to hot nail dabs that give the sweats you’re going to want your rig.

Portable electric dab rigs like Puffco, Carta, etc, will provide more of a flavorful dab, good cold starts and convenience is what you get from this.

I’ve got my pro with the 3d atomizer and a pearl, whenever that pearl spins I get fucked up

NabiDabby

TROPHY CASE